i-PRO

i-PRO · SR-01TB-IP-1Y

i-PRO SR-01TB-IP-1Y Cloud Collect 1TB Storage

1TB cloud storage subscription designed for i-PRO IP camera deployments requiring off-site video archival and compliance-grade retention

• 1TB annual capacity supports ~100–150 i-PRO 5MP cameras at 30-day rolling retention.
• Native SAM console integration eliminates third-party gateways for video indexing and metadata.
• H.264 compression reduces storage footprint with no codec conversion overhead on ingest.

i-PRO · NVR-R-2-60TB-V2

I-pro NVR Dual Xeon Octa Core CPU 32GB RAM WIN - NVR-R-2-60TB-V2

2U rack-mount NVR with dual Xeon octa-core CPUs, 32 GB of RAM, and 60 TB of recording capacity

• Dual Xeon octa-core CPUs and 32 GB RAM handle high channel counts without bottlenecks.
• 60 TB RAID with hot-swap bays keeps enterprise sites recording during drive replacement.
• Pre-tuned i-PRO VMS stack eliminates integration guesswork and reduces commissioning time.

i-PRO · MC-UPG-A-921

i-PRO Reader: R10/RP10 Iclass/multiclass - MC-UPG-A-921

Deploying access control across campuses with mixed credential ecosystems demands reader hardware that supports legacy HID iClass alongside modern

• Upgrades R10/RP10 readers to iCLASS SE and multiclass support without hardware swap.
• Dual-frequency 13.56 MHz + 125 kHz prox covers legacy and modern credentials in one unit.
• OSDP, Wiegand, and RS-485 outputs integrate with existing access control infrastructure.

i-PRO · NVR-R-2-144TB-V2

I-pro NVR 2U Dual Xeon Octa Core CPU 32GB RAM - NVR-R-2-144TB-V2

2U rack-mount NVR with dual Xeon octa-core CPUs, 32 GB of RAM, and 144 TB of recording capacity

• Dual Xeon octa-core CPUs handle VMS services, decode, and analytics concurrently.
• 144 TB RAID array supports several-hundred-channel deployments with weeks of retention.
• Hot-swap drive bays allow failed-disk replacement without taking the appliance offline.

i-PRO · MC-TM400

i-PRO Altronix TM400 Enclosure Lets YOU Easily - MC-TM400

N Altronix TM400-class enclosure for housing access-control or low-voltage power and accessory hardware

• Rugged steel construction protects low-voltage access-control hardware in the field.
• Internal mounting plate and knockout panels enable organized, serviceable cable layouts.
• Lockable cover with tamper-switch provision supports secure, monitored installations.

i-PRO · PQKV10062Z

i-PRO Front Cover - PQKV10062Z

When you're maintaining i-PRO camera installations in high-traffic or harsh environments, a damaged front cover can compromise both aesthetics and

• Genuine OEM part restores original IP rating and weatherproof seal integrity.
• Exact factory tolerances ensure proper gasket compression and lens alignment.
• Powder-coated stamped steel/aluminum construction provides UV-resistant durability.

i-PRO · T2MK7F8QMC

i-PRO T2MK7F8QMC TROVE2M2 Cam-Lock Mounting Hardware

Cam-lock mounting hardware designed to securely fasten i-PRO TROVE2M2 network cameras to rack systems and mounting surfaces

• Cam-lock engagement cuts TROVE2M2 install time and enables repeatable repositioning.
• Rack-mount design fits standard equipment frames for structured, organized deployments.
• Supports PoE 802.3af-powered 1 MP camera configs within the i-PRO LINQ2 ecosystem.

i-PRO · MC-FPV4-E2M/4TX

i-PRO Powersupply: FPV4-E2M/4TX 4DR 6A/12V OR - MC-FPV4-E2M/4TX

When deploying multi-door access control systems, unreliable power distribution kills projects before they start

• Delivers 6A at 12VDC across 4 fused outputs for reliable multi-door power distribution.
• Per-output overcurrent protection isolates faults without disrupting adjacent access points.
• NDAA-compliant enclosed cabinet rated -20°C to +49°C suits mechanical rooms and IT closets.

i-PRO · NVR-DTL-1-48TB-V8

I-Pro NVR-Dtl-1-48TB-V8 Stl-2 Server

High-capacity network video recorder server from i-PRO's enterprise surveillance line, configured with 48TB of onboard storage

• Single Xeon 4C/8T CPU with 32 GB RAM handles concurrent multi-stream NVR workloads.
• 48 TB onboard storage supports extended video retention without additional NAS expansion.
• Windows 11 Pro pre-installed on M.2 SSD enables same-day deployment into existing environments.

i-PRO · PLCD9C/2

i-PRO 9.7 Inch High Resolution Color LED Monitor Rack - PLCD9C/2

When you need compact video monitoring in a rack-mounted configuration, space becomes your primary constraint

• 9.7-inch color LED panel delivers consistent brightness for rack-based video verification.
• Fits standard 19-inch rack enclosures, keeping monitoring co-located with NVRs and switches.
• Compact form factor frees rack units for additional network or recording equipment.

i-PRO · MX-O-SMA-S-6D041

i-PRO MX-O-SMA-S-6D041 Sensor Module S16/M16

1MP modular sensor unit engineered for integration with i-PRO S16/M16 and S15/M15 camera bodies

• 1MP (1280×960) sensor supports face ID at 6–8 ft and plate reads at 15–20 ft indoors.
• F/1.8 aperture with Moonlight technology delivers usable imagery down to 0.3 lux.
• Swappable module design lets you rehead S16/M16 bodies on-site without full camera replacement.

i-PRO · RP-SDGD32DA2

i-PRO Arbitrator 32 GB Class 10 Sdhc Card - RP-SDGD32DA2

32 GB Class 10 SDHC memory card qualified by i-PRO for use in the Arbitrator in-car video platform

• 32 GB Class 10 SDHC rated for continuous-write workloads in the Arbitrator DVR.
• Surveillance-grade endurance handles wide in-vehicle temperature extremes reliably.
• Qualified compatibility eliminates DVR field failures from unvetted consumer cards.

i-PRO · MC-9520

i-PRO Credintial: 9520 Schlage Mifare Classic Smart - MC-9520

When you're deploying access control systems that integrate with existing Schlage infrastructure, credential compatibility isn't optional—it's

• Mifare Classic 1K at 13.56 MHz ensures fast, reliable reads on Schlage AD-400 and NDE readers.
• Pre-encoded ISO card format drops into existing badge holders and Schlage card management workflows.
• NDAA-compliant credential supports enterprise procurement requirements without reader replacement.

i-PRO · PSS532

i-PRO GPUH532 CCU Medical Grade Power Supply - PSS532

Medical-grade CCU (Camera Control Unit) power supply for the GPUH532 medical camera platform

• Meets IEC 60601-1 leakage-current limits required for clinical environments.
• IEC 60601-1-2 EMC compliance eliminates re-testing when integrating into medical systems.
• Direct-replacement form factor fits GPUH532 CCU mounting points with no modification.

i-PRO · NETWAY8E

i-PRO NETWAY8E 8-Port POE+ Network Switch 240W

i-PRO · MERCURY-EP1501

i-PRO MERCURY-EP1501 Intelligent Controller with PoE

N intelligent edge controller designed to streamline network surveillance deployments by consolidating access control, I/O management, and PoE power

• Supports H.265, H.264, and MJPEG codecs for flexible mixed-camera deployments.
• Integrated 802.3af PoE eliminates separate power runs to compatible endpoints.
• Ceiling and rack mount options suit both distributed sites and centralized SOCs.

i-PRO · MC-8543

i-PRO MC-8543 DESFire EV3 Cards - 4K - ISO - ISO glossy white

DESFire EV3 contactless smart card in the standard ISO ID-1 form factor, finished in glossy white with 4K memory

• AES-128 mutual authentication resists cloning and replay attacks on access control.
• Multi-application file system consolidates access, payment, and attendance on one card.
• ISO ID-1 form factor at 13.56 MHz drops into existing DESFire EV1/EV2 reader installs.

i-PRO · PML4386

i-PRO Leica Type Zoom Video Adapter F=43-86MM - PML4386

• Leica-type mount enables integration of premium glass into i-PRO camera platforms.
• 43–86mm zoom range supports flexible framing from standard to moderate telephoto.
• Parfocal mechanical construction maintains focus integrity throughout zoom adjustments.

i-PRO · MX-O-SMA-S-6D237

i-PRO MX-O-SMA-S-6D237 Sensor Module S16/M16 S15/M15 with HD

When you need to expand coverage or upgrade imaging capabilities on existing i-PRO modular camera systems, swapping sensor modules delivers immediate

• HD sensor upgrades S16/M16 and S15/M15 bodies without replacing the full camera.
• Field-swappable module cuts downtime; existing cabling and network config stay intact.
• Camera body auto-recognizes the new sensor, preserving VMS and analytics integration.

i-PRO · MC-75-B100C4D8PE-4

i-PRO Powersupply: FPO75-B100C4D8PE4M 75W - MC-75-B100C4D8PE-4

75 W LifeSafety Power FPO75-B100C4D8PE4M access-control supply for small-to-medium door counts

• 75 W output suits small-to-medium door counts without over-provisioning closet space.
• Selectable 12 VDC/24 VDC output accommodates mixed lock and reader hardware on one supply.
• Individual fused channels plus AC-fail and tamper outputs enable panel-monitored fault isolation.