ACTi CTS-HC100-UHDA-WLMT Huddle Camera Wall Mount
Overview
The CTS-HC100-UHDA-WLMT is a wall-mounted bracket assembly designed to deploy the ACTi 10MP huddle camera in meeting rooms and collaborative video conferencing spaces. This mount enables rapid installation without requiring custom fabrication or additional hardware — the integrated design positions the camera for optimal framing in small to medium conference areas. The bracket accommodates PoE (802.3af) powered operation, eliminating the need for separate power drops at the camera location.
Compatibility
This wall mount is engineered specifically for the ACTi CTS-HC100-UHDA all-in-one huddle camera system. It mounts to standard stud framing or drywall anchors and supports the weight and connector footprint of the 10MP huddle camera head. Verify mounting surface load capacity before installation — the mount bracket and camera assembly require stable wall anchoring.
Installation Notes
Mount the bracket at eye level or slightly above for optimal video conferencing framing — typically 5 to 6 feet above the floor in standard meeting rooms. Ensure PoE cabling (Category 5e or higher) runs to the wall location before mounting. Use appropriate wall anchors for drywall (minimum #8 toggle bolts or equivalent) or stud fasteners (3/8-inch wood screws) depending on your mounting surface. Do not exceed the rated load capacity of your wall material. Allow slack in the network cable during installation to prevent strain on the connector.
What's in the Box
- Wall mount bracket assembly (CTS-HC100-UHDA-WLMT)
