HPE Q1H63A Premier Flex MPO/MPO OM4 12F 1M Fiber Trunk Cable
Overview
The HPE Q1H63A is a Premier Flex MPO/MPO fiber trunk cable built on OM4 multimode fiber, terminated with MPO connectors on both ends, in a 1-meter length. It's designed for structured cabling inside HPE server, storage, and networking environments where pre-terminated, factory-tested MPO trunks replace field-spliced runs between switches, patch panels, and top-of-rack equipment. Q1H63A carries a 12-fiber configuration, the standard count for a single MPO trunk used in 40GbE and similar parallel-optics links.
Key Features
- MPO/MPO connector configuration: both ends terminate in MPO connectors, so this cable is built for direct switch-to-panel or panel-to-panel parallel optics runs rather than duplex LC/SC patching — confirm your endpoints are MPO-native before ordering.
- OM4 multimode fiber: OM4 supports longer link distances at higher data rates than OM3, giving headroom if you're running 40G/100G parallel optics over short in-rack or in-row distances.
- 12-fiber (12F) count: a full 12-strand trunk in a single MPO connector — the standard building block for 40GBASE-SR4 and similar breakout or trunk configurations, so you don't need to manage individual fiber pairs.
- 1-meter length: sized for short, high-density runs — rack-to-rack or within-rack connections where cable slack and bend radius management matter more than distance.
- Premier Flex construction: HPE's Premier Flex line is built for tighter bend radius tolerance than standard fiber trunks, which matters in dense cable management arms and high-fill patch panels.
Integration & Compatibility
Q1H63A is intended for use within HPE server and networking deployments as a structured MPO trunk — pair it with MPO-compatible patch panels, cassettes, or directly-connected parallel-optics transceivers rated for OM4. If your environment standardizes on duplex LC connectivity instead, this cable will need an MPO breakout cassette to interface with it. For broader rack and connectivity planning, review a PoE and network planning guide alongside your fiber trunk layout, and check the network switches category for compatible parallel-optics-capable hardware.
Frequently Asked Questions
Q: What fiber type is the HPE Q1H63A built on?
A: OM4 multimode fiber, terminated with MPO connectors on both ends.
Q: How many fibers does the Q1H63A carry?
A: It's a 12-fiber (12F) MPO trunk cable.
Q: What length is the Q1H63A?
A: 1 meter.
Q: Can I use the Q1H63A with duplex LC transceivers?
A: Not directly — it terminates in MPO connectors on both ends, so you'd need an MPO-to-LC breakout cassette to interface with duplex LC equipment.
The Q1H63A is a straightforward piece of structured cabling: a 1-meter, 12-fiber MPO/MPO trunk on OM4 glass. Nothing exotic here, but the details still matter when you're planning a rack.
Technical Highlights:
- OM4 multimode fiber: gives more link-distance headroom at 40G/100G parallel-optics rates than OM3, useful if you might extend runs later.
- 12-fiber MPO trunk: matches standard 40GBASE-SR4 fiber counts, so it drops into existing MPO cassette and panel infrastructure without custom fiber counts.
- 1-meter length: right-sized for in-rack or adjacent-rack jumps — don't order this expecting row-to-row reach.
Deployment Considerations:
- Both ends are MPO, not LC/SC — verify your patch panel or transceiver end accepts MPO directly, or budget for a breakout cassette.
- At 1 meter, this is a short-run cable — measure your rack path including slack and bend radius before ordering, since MPO trunks aren't as forgiving to re-terminate as duplex fiber.
Q1H63A fits best in a dense server rack or blade enclosure deployment where you're running short MPO trunk jumps between adjacent equipment on OM4-rated 40G/100G parallel optics.
