HPE S6X52A#ABA 48-Port Gigabit Network Switch with 4x SFP+ 10G Uplinks
Overview
The HPE Networking CW 2150 S6X52A#ABA is a 48-port access-layer switch delivering 10M/100M/1G auto-negotiation on every copper port, backed by four SFP+ uplink slots that support both 1G and 10G transceivers. The port density and 10G uplink capacity make it a practical fit for mid-size wiring closets, security infrastructure floors, and enterprise access-layer deployments where you need to consolidate a large number of endpoints without stepping up to a chassis-based solution.
The CW 2150 series sits within the HPE networking product line, designed for organizations that standardize on HPE infrastructure. If you are planning a network switch deployment that needs to support IP cameras, access control readers, VoIP endpoints, or workstations from a single access tier, the 48-port copper + 4-port SFP+ layout is a well-understood, field-proven density point.
Key Features
- 48x 10M/100M/1G Copper Ports: Full gigabit auto-negotiation on all 48 access ports means every connected device — IP cameras, thin clients, IP phones, access control panels — negotiates its best available speed without manual configuration. No 100M bottlenecks at the edge.
- 4x SFP+ Uplink Ports (1G/10G): The quad SFP+ uplinks give you flexibility to run 1G fiber to an existing distribution switch or step up to 10G when your aggregation layer supports it. That headroom matters in camera-heavy deployments where upstream bandwidth can become a constraint as you add encoders or high-resolution streams. Pair with appropriate SFP+ transceivers for your fiber plant.
- 48-Port Density in a Single Unit: Consolidating 48 endpoints into one switch reduces the number of aggregation hops, simplifies your wiring closet layout, and lowers per-port infrastructure cost compared to stacking multiple smaller switches.
- HPE CW 2150 Series Platform: Part of a defined HPE switch family, which means consistent management tooling, firmware update paths, and support contracts across your HPE infrastructure — relevant for IT teams already invested in HPE's ecosystem.
Integration & Compatibility
The S6X52A#ABA is the US English SKU (ABA suffix) of the CW 2150 48-port platform. The four SFP+ ports accept standard 1G and 10G SFP+ form-factor transceivers, giving you vendor flexibility on the fiber side. For deployments integrating IP security cameras or other PoE-dependent endpoints, verify PoE capability and per-port power budget against your device list before deployment — consult the HPE CW 2150 datasheet for confirmed PoE specifications, as PoE delivery details are not confirmed in the available evidence for this SKU.
If your environment requires PoE switch capability for powering cameras and access control hardware directly from the switch, confirm the S6X52A#ABA PoE spec via the HPE product bulletin before ordering.
Frequently Asked Questions
Q: What is the difference between the S6X52A#ABA and other CW 2150 variants?
A: The #ABA suffix designates the US English localization of the HPE CW 2150 48-port switch. Other regional variants carry different country suffix codes. Core hardware specs — 48x 1G copper ports and 4x SFP+ 1G/10G uplinks — are consistent with the CW 2150 platform.
Q: Does the S6X52A#ABA support 10G on all SFP+ ports simultaneously?
A: The four SFP+ ports each support 1G or 10G transceivers. All four ports are uplink-capable. For confirmed simultaneous throughput and switching fabric capacity, reference the HPE CW 2150 datasheet directly.
Q: Is the S6X52A#ABA suitable for powering IP cameras via PoE?
A: PoE capability on this SKU is not confirmed in the available product evidence. Verify PoE support and total power budget against the HPE CW 2150 product bulletin before deploying IP cameras or other PoE devices on this switch.
Q: What does this switch weigh, and what rack space does it require?
A: The S6X52A#ABA ships at 12.47 lbs. Rack unit depth and form factor should be confirmed against the HPE CW 2150 datasheet for rack planning purposes.
The HPE S6X52A#ABA gives you 48 auto-negotiating gigabit copper ports and four SFP+ uplinks in a single access-layer unit — a layout that covers the density most mid-size wiring closets actually need without overbuilding. The 1G/10G flexibility on those four SFP+ ports is the practical differentiator: you can deploy it today against a 1G distribution layer and cable for 10G uplinks when your core is ready, without swapping the switch.
Technical Highlights:
- 48x 10M/100M/1G Ports: Full auto-negotiation across all 48 copper ports means no manual speed-matching for mixed-generation endpoints — relevant when you're terminating a combination of IP cameras, access control hardware, and workstations on the same switch.
- 4x SFP+ at 1G or 10G: Uplink headroom is where most access switches get boxed in over a 5-year lifecycle. Having four 10G-capable uplinks means upstream bandwidth is not the constraint as camera resolution and stream counts increase.
- 12.47 lb Unit Weight: At just over 12 lbs, the switch installs without needing a second pair of hands for rail mounting — a minor but real factor in solo-tech deployments in remote IDF closets.
Deployment Considerations:
- Confirm PoE capability against the HPE CW 2150 product bulletin before committing this switch to a design that powers IP cameras or access control readers directly — PoE delivery specs are not confirmed in available evidence for this SKU.
- The #ABA suffix is US English localization — if you're quoting for a multi-site deployment with international locations, verify regional SKU availability separately to avoid substitution delays.
This switch fits cleanest in a structured enterprise access-layer build — specifically, a wiring closet serving a mix of endpoint types where 48 ports hits the density target and 10G uplinks future-proof the upstream path without a chassis investment.
