HPE P82658-005 ProLiant DL360 Gen11 Rack Server
Overview
The HPE P82658-005 is a 1U rack server built around the DL360 Gen11 platform, configured with an Intel Xeon 6530 processor, 8x16GB memory (128GB total), and an 8-bay Small Form Factor SSD storage layout. At 69.18 lb, this is a dense compute platform intended for data center and enterprise rack environments where CPU-intensive workloads, virtualization, and high-speed all-flash storage are the primary drivers. The P82658-005 is sourced for the North American market.
Note: This listing reflects the named configuration as captured in distribution records. For full technical specifications — including confirmed I/O, expansion slots, networking, power supply redundancy, and BIOS/BMC details — refer to the HPE QuickSpecs document for the DL360 Gen11 platform on HPE's official site before finalizing your purchase decision.
Key Features
- Intel Xeon 6530 Processor: The Xeon 6530 is a high-core-count Sapphire Rapids-based CPU suited for parallel workloads — virtualization hosts, VMS recording servers handling dozens of high-resolution streams, and HPC-adjacent tasks all benefit from the thread density this class of processor delivers.
- 128GB DDR5 Memory (8x16GB): 128GB in an 8-DIMM configuration gives you headroom for memory-intensive hypervisor loads and large in-memory datasets. The 8x16GB spread across channels supports balanced bandwidth — relevant for storage-controller-heavy I/O patterns common in surveillance NVR and AI inference server roles.
- 8-Bay SFF All-Flash Storage: Eight Small Form Factor bays configured for SSD deliver the low-latency, high-IOPS profile that spinning-disk arrays cannot match for concurrent read/write workloads. In a VMS or video analytics deployment, all-flash eliminates the write-latency bottleneck that causes frame drops under sustained multi-camera recording.
- 1U DL360 Gen11 Form Factor: The DL360 Gen11 chassis is a well-documented, widely rack-integrated platform — compatible with standard HPE rail kits and cable management accessories. The 1U profile maximizes compute density in constrained rack space.
- North America Configuration (NA SVR): The P82658-005 is the North American market variant, ensuring regulatory compliance and power supply compatibility appropriate for US/Canada deployments.
- 69.18 lb Shipping Weight: Plan for two-person installation or mechanical lift assist when racking — this is at the upper weight boundary for single-person safe rack mounting per standard data center safety protocols.
Integration & Compatibility
The DL360 Gen11 platform integrates with HPE OneView, iLO 6 (Integrated Lights-Out), and HPE InfoSight for lifecycle and remote management — confirm license entitlements separately as they are not implied by this SKU. For video surveillance deployments, this server class is compatible with major VMS platforms including Milestone XProtect, Genetec Security Center, and Avigilon Control Center when configured to the VMS vendor's minimum hardware requirements. Verify CPU, RAM, and storage alignment against your VMS vendor's server sizing guide before ordering.
Frequently Asked Questions
Q: What processor does the HPE P82658-005 include?
A: The P82658-005 is configured with an Intel Xeon 6530 processor as indicated by the product name string (6530) in the HPE configuration code. Confirm full CPU specifications in the HPE QuickSpecs for the DL360 Gen11 before purchase.
Q: How much memory does the P82658-005 ship with?
A: The configuration name specifies 8x16GB, for 128GB total DDR5 installed across eight DIMM slots.
Q: Is this server compatible with major video management systems?
A: The DL360 Gen11 platform is broadly supported by enterprise VMS vendors including Milestone, Genetec, and Avigilon. Always validate against the specific VMS vendor's server compatibility matrix — CPU model, RAM, and storage IOPS requirements vary by channel count and resolution.
Q: What is the weight of the P82658-005?
A: The verified shipping weight is 69.18 lb. Plan for two-person lift or mechanical assistance when installing in a rack.
Q: Is the P82658-005 covered by an HPE manufacturer warranty?
A: HPE ProLiant servers typically ship with a manufacturer warranty; however, the specific warranty term for P82658-005 is not confirmed in the available distribution data. Contact the seller or HPE directly to confirm warranty coverage and support options for this SKU.
Q: What does the SFF SSD configuration mean for storage performance?
A: SFF (Small Form Factor) SSD bays use 2.5-inch solid-state drives. This all-flash configuration delivers significantly lower latency and higher IOPS compared to HDD alternatives — a meaningful advantage in write-intensive workloads like continuous video recording across multiple high-resolution cameras.
The P82658-005 is the kind of SKU that shows up in enterprise security and data center RFQs because the DL360 Gen11 platform has a long track record as a dense, rack-efficient compute node. The 69.18 lb weight is the one spec directly confirmed by distribution data — and it tells you something real about how this unit needs to be handled at installation time. For a 1U server at that weight, two-person racking or a mechanical lift is not optional.
Technical Highlights:
- Xeon 6530 CPU: High core count Sapphire Rapids class — well-matched to virtualization hosts running multiple VMS instances or AI inference workloads alongside recording.
- 8x16GB (128GB) Memory: Eight-channel DDR5 configuration supports the memory bandwidth demands of concurrent multi-stream video analytics without saturating the memory subsystem.
- 8-Bay SFF SSD: All-flash 8-bay layout eliminates rotational latency — in a 64+ camera 4K recording environment, this is the difference between consistent write throughput and periodic frame-drop events under peak load.
Deployment Considerations:
- At 69.18 lb, confirm your rack cabinet's weight rating and rail kit load capacity before installation — standard 4-post rails handle this, but older or consumer-grade racks may not.
- The distribution record does not confirm power supply wattage, redundancy configuration, or network port count — pull the HPE QuickSpecs document for the DL360 Gen11 with option code P82658-005 to validate before committing to a rack power plan.
This configuration is a strong fit for a centralized VMS recording server or virtualization host in a purpose-built physical security operations center where rack density, all-flash write performance, and long-term HPE ecosystem support are the governing requirements.
