HPE P81847-005 ProLiant DL325 Gen11 1U Rack Server
The HPE ProLiant DL325 Gen11, model P81847-005, is a single-socket 1U rack server configured with an AMD EPYC 9015 processor, 2x32GB memory, and 8x Small Form Factor (SFF) SSD bays — a density-focused platform suited for virtualization workloads, VMS back-end deployments, and edge compute roles where rack space is at a premium. At 59.79 lb and a footprint of 36.00 x 22.00 x 10.00 inches, this is a full-depth server that requires standard 1U rack clearance and a rack rated for the appropriate static load.
Overview
The DL325 Gen11 line positions single-socket AMD EPYC compute as a cost-efficient alternative to dual-socket platforms for workloads that scale better on high core density than on multi-socket NUMA topology. The 8x SFF SSD bay configuration on P81847-005 (often searched as P81847 005) prioritizes storage throughput and bay count over raw capacity — a practical fit for surveillance NVR back-ends, database appliances, and edge AI inference nodes where fast random I/O matters more than spinning-disk volume. This unit ships from manufacturing origins in Mexico and the United States.
Key Deployment Considerations
- Chassis depth — 36 inches: At 36 inches deep, this server requires a full-depth rack or a deep 4-post open frame. Verify your rack's usable interior depth before ordering — shallow or mid-depth cabinets will not accommodate this chassis without modification.
- Weight — 59.79 lb: Nearly 60 lb fully configured means two-person installation into the rack is the practical standard. Factor rail kit and cable management arm weight on top of this figure for total load planning.
- 8x SFF SSD bays: Eight small form factor drive bays support a storage-dense 1U footprint. SFF bays accept 2.5-inch drives, which are the standard for enterprise SSDs — no large form factor (LFF/3.5-inch) drives will fit this configuration.
- Single-socket EPYC 9015: The EPYC 9015 is part of AMD's Genoa generation. Single-socket architecture eliminates the NUMA complexity of dual-socket platforms, simplifying OS and hypervisor memory configuration for most enterprise workloads.
- 2x32GB memory (64GB total): 64GB of installed RAM is sufficient for moderate virtualization loads and typical VMS recording server duties, but dense multi-VM deployments or large in-memory database workloads may require memory expansion — verify the DL325 Gen11 DIMM slot availability and supported maximums against HPE's QuickSpecs before committing.
Integration and Compatibility
As part of the broader HPE server and compute catalog, the DL325 Gen11 platform is supported by HPE's iLO management firmware for out-of-band access, remote KVM, and health monitoring — standard expectations for any rack-mount server in an enterprise or surveillance infrastructure role. For VMS deployments, pair this server with a validated NVR software platform and confirm OS and driver support via the HPE Service Pack for ProLiant (SPP). Organizations building out PoE switching and camera infrastructure alongside this server should plan storage and NIC I/O requirements based on camera count and resolution targets before deployment. Review HPE's server accessories and rail kits to confirm compatible mounting hardware for your specific rack model.
Frequently Asked Questions
Q: What processor does the HPE P81847-005 include?
A: The product name designates an AMD EPYC 9015 processor as part of the factory configuration. Confirm processor details against HPE's official QuickSpecs for this SKU before specifying.
Q: How much memory does the P81847-005 ship with?
A: The configuration name indicates 2x32GB (64GB total) of installed memory. Verify DIMM type and slot configuration via HPE QuickSpecs if memory expansion is planned.
Q: How deep is the DL325 Gen11 chassis and what rack type is required?
A: Per the product attributes, the chassis measures 36.00 inches in depth. A full-depth 4-post rack or compatible rack enclosure is required. Verify your rack's interior usable depth against this dimension before purchase.
Q: What drive form factor does the P81847-005 support?
A: The 8SFF designation indicates 8x Small Form Factor (2.5-inch) drive bays. This chassis does not accommodate 3.5-inch LFF drives.
Q: How heavy is the HPE P81847-005?
A: The server weighs 59.79 lb as shipped. Plan for two-person rack installation and verify your rack's weight capacity, particularly if multiple servers are installed in the same rack.
The P81847-005 is a full-depth, 59.79 lb 1U platform — that weight and 36-inch depth are the two specs I flag immediately on any DL325 Gen11 quote, because they bite integrators who spec the server without checking the destination rack. If your customer's cabinet has less than 36 inches of usable interior depth or a per-shelf weight limit under 60 lb, this unit won't land cleanly.
Technical Highlights:
- 8x SFF SSD bays in 1U: Eight 2.5-inch bays in a single rack unit is a strong storage density ratio — enough bay count for a meaningful RAID array or tiered NVMe/SATA mix without consuming 2U.
- Single-socket EPYC 9015: Single-socket means simpler BIOS/hypervisor memory topology and no inter-socket latency — a legitimate advantage for latency-sensitive workloads like video analytics or real-time VMS indexing compared to a dual-socket setup at the same total core count.
- 64GB installed RAM: 64GB is a workable baseline for a recording server handling moderate camera counts, but if this is headed into a dense multi-tenant VMS environment or an AI inference role, budget for memory expansion upfront — retrofitting RAM in a live rack is time-consuming.
Deployment Considerations:
- Confirm compatible HPE rail kit part numbers for your specific rack brand before the server ships — not all rail kits are included by default and a 60 lb server without rails is a safety issue during installation.
- The 36-inch chassis depth is the hard constraint to validate first: many mid-market cabinets are 30–32 inches of usable interior depth, which will not fit this unit without an extended-depth rack or a wall-mount open-frame alternative.
This server is well-positioned as a surveillance NVR back-end or edge virtualization host in a data center or IT closet that already runs full-depth HPE infrastructure — it fits naturally into an existing HPE iLO management fabric and the EPYC single-socket architecture keeps the software licensing footprint lean for per-socket-licensed VMS platforms.
