Comelit 1409 Analog CCTV Camera Input Module
Overview
The Comelit 1409 is a remote camera module for Simplebus 2 two-wire digital systems. It bridges analog CCTV cameras to door entry monitors by allowing management of up to 3 color cameras in cyclical sequence using a dedicated button on compatible monitors. This solves the integration problem when analog camera surveillance exists alongside modern door entry systems — you gain remote camera viewing at entry points without replacing functioning analog hardware. The module accepts 12 Vac or 22 Vdc power supply.
Compatibility
The 1409 integrates with Comelit Simplebus 2 systems and compatible door entry monitors equipped with remote camera viewing capability. It manages analog color cameras only — verify that your door station supports remote camera control before deployment. The module connects via Simplebus 2 two-wire digital bus architecture.
Installation Notes
The 1409 occupies 4 DIN modules in a standard rail enclosure, measuring 66mm wide × 83mm tall × 37mm deep (2.6 × 3.27 × 1.46 inches). Mount in a control room rack or equipment cabinet where power and Simplebus 2 bus wiring are accessible. Provide either 12 Vac or 22 Vdc power as specified — confirm voltage selection matches your power supply before energizing. Connect camera inputs and Simplebus 2 bus termination according to Comelit system documentation.
What's in the Box
- 1x Comelit 1409 remote camera module (4 DIN modules)
