HES

HES

SKU: 9000-116-630

HES 9000-116-630 Spacer Kit 1/16 Satin Stainless

1/16" satin stainless spacer plates for HES 9000 Series locks

• 1/16" satin stainless steel construction resists corrosion in demanding environments.
• Engineered for HES 9000 Series, ensuring precise strike alignment and reliable lock engagement.
• Eliminates frame gaps that compromise electromagnetic lock performance in access control installs.

HES

SKU: RT-1T

HES RT-1T Wireless Transmitter with Key Chain and Holder

Portable wireless transmitter for HES RT-1 multi-door access control

• Outdoor-rated handheld form factor supports deployment in indoor and exterior access points.
• Lightweight at 0.1 lb with included key chain attachment for daily carry by authorized personnel.
• Integrates with HES RT-1 receiver systems for wireless actuation across multi-door control networks.

HES

SKU: RP-33

HES RP-33 Radius Faceplate

Radius faceplate for HES electric strike installations

HES

SKU: RP-05

HES RP-05 Remote Plate SGSS Red/Green LED Push Button

Stainless steel remote plate with dual LED status for access control

• Stainless steel (SGSS) construction resists corrosion in high-moisture environments.
• Dual red/green LED gives instant door-state confirmation at the entry point.
• N/O momentary push button integrates directly with HES electric strike circuits.

HES

SKU: RP-06

HES RP-06 Remote Plate Stainless Steel LED Medico Lock

Stainless steel remote plate with red/green LED for medico locks

• Stainless steel housing resists corrosion in healthcare and pharmaceutical environments.
• Integrated red/green LED gives instant lock-state confirmation without extra hardware.
• Medico-format mounting integrates directly into existing HES lock mechanisms at 12VDC.

HES

SKU: 801A-630

HES 801A-630 Satin Stainless Steel Faceplate

Satin stainless steel faceplate for HES electrified strike hardware

• Satin stainless steel construction resists corrosion in high-traffic commercial installs.
• Compatible with HES electrified locking hardware for streamlined access control integration.
• Supports 24VDC input, fitting standard electrified strike wiring configurations directly.

HES

SKU: RP-03M

HES RP-03M Remote Plate Narrow N/C Tamper Switch

N/C tamper switch remote plate for HES strike systems with narrow profile

• Narrow-profile remote plate with N/C tamper switch
• Medico hole configuration for standard frame mount
• Compatible with HES electric strikes and lock systems

HES

SKU: RP-100302

HES RP-100302 Electric Strike 450A Stainless Steel

450A stainless steel electric strike with fail-safe N/O operation

• Fail-safe N/O operation releases latch on power loss, meeting emergency egress code.
• Runs on 12VDC or 24VDC, eliminating converters when retrofitting existing control panels.
• 302 stainless steel construction resists corrosion in commercial and light-moisture environments.

HES

SKU: RP-02

HES RP-02 Ivory Pushbutton Red LED N/O Switch

Narrow ivory pushbutton with red LED for access control door release

• N/O contact closes on press — no relay logic needed for standard REX circuits.
• Integral red LED confirms circuit activation, reducing user confusion at the door.
• Narrow wall-mount plate fits tight vestibule trim without frame modification.

HES

SKU: RP-03A

HES RP-03A Remote Plate Tamper Switch R/G LED

Remote status plate with dual-color LED and tamper detection for access control

• Dual red/green LED gives instant visual lock status confirmation at the door.
• N/O tamper switch integrates directly with control panels for real-time alerts.
• D-hole mount fits standard frames; runs on 12VDC access control power supplies.

HES

SKU: PA-300

HES PA-300 Two Tone Piezo Buzzer 3-28VDC

Two-tone piezo buzzer for security systems, 3-28VDC operation

• Two-tone audio output lets operators distinguish alarm events from status confirmations.
• Wide 3–28VDC input range supports legacy, 12VDC, and 24VDC systems without added regulation.
• Piezo construction requires no driver board—wires directly to relay outputs or strike circuits.

HES

SKU: DPS-C-38G

HES DPS-C-38G A100 Door Position Switch

Real-time door status monitoring for HES access control systems

• 24VDC input aligns with standard access control power infrastructure, no added PSU.
• Wiegand protocol enables drop-in integration with HES A100 and third-party platforms.
• Two mounting orientations support both new construction and retrofit door installations.

HES

SKU: RP-28FLASHING

HES RP-28FLASHING Radius Faceplate

Radius faceplate for HES electric strike alignment and mounting

• Radius design ensures precise strike alignment in standard commercial door frames.
• US-manufactured construction supports consistent dimensional accuracy across deployments.
• Wall-mount profile integrates cleanly into HES electric strike systems at 24VDC.

HES

SKU: RP-27

HES RP-27 Radius Faceplate

Radius faceplate for HES electronic locks on curved-frame doors

• Purpose-built for radius-frame doors, eliminating the need for custom fabrication.
• Integrates mounting support and finished trim in one component, reducing part count.
• Domestic manufacture at 0.2 lb keeps hardware overhead minimal during installation.

HES

SKU: RP-27A

HES RP-27A Radius Faceplate

Radius faceplate for HES electronic locks on 3-door systems

• Radius faceplate supports up to 3-door HES lock deployments from a single unit.
• Operates at 24VDC, aligning with standard access control panel power distribution.
• US-manufactured to tight tolerances, ensuring reliable alignment on rack-mount installs.

HES

SKU: MS4043-00-130

HES MS4043-00-130 Cylinder Guard

Cylindrical equipment guard for HES security systems, indoor/outdoor

• Shields HES lock cylinders from impact and vandalism, extending equipment lifecycle.
• Weighs 2 lb, minimizing structural load on door frames during retrofit or new installs.
• US-manufactured with standard stile prep; no special tooling required for integration.

HES

SKU: DK-CPSS

HES DK-CPSS Digital Keypad CoverPlate

Protective coverplate for HES digital keypad access control systems

• Wiegand communication ensures drop-in compatibility with existing access control panels.
• Operates on 24VDC input, aligning with standard electric strike power infrastructure.
• Supports up to 92-door deployments, scaling to mid-to-large commercial installations.

HES

SKU: SB-1-03

HES SB-1-03 Sex Bolt Fastener US03

Sex bolt fastener for HES/Assa Abloy access control systems

• Dual-component sex bolt design prevents cross-threading during rack and door frame installs.
• Maintains clamp load under cyclic vibration, eliminating fastener creep on EM lock assemblies.
• Compatible with HES/Assa Abloy electromagnetic locks and electric strike hardware assemblies.

HES

SKU: SB-1-10B

HES SB-1-10B Sex Bolt US10B

Sex bolt coupling for HES electric strike installations

• Sex bolt coupling in US10B satin bronze finish
• Direct-fit hardware for HES electric strikes
• Corrosion-resistant for indoor commercial doors

HES

SKU: 1500-106-630

HES 1500-106-630 Retrofit Kit

HES 1500 Series retrofit kit for field upgrades without system replacement

• Integrates directly with HES 1500 series strikes, eliminating cross-platform re-engineering.
• Runs on 24VDC input, fitting standard door control wiring without custom cabling.
• Field-deployable retrofit kit lets you upgrade existing doors without full system replacement.