HES

HES · 1600-605-DLM

HES Electric Strike Body Only Dual lock monitors - 1600-605-DLM

When you're integrating access control into existing door hardware or replacing failed strike components, you need flexibility without tearing out

• Dual lock monitors output separate bolt and door status signals for precise event differentiation.
• Fail-secure mode holds the door locked on power loss; rated 1,500 lbs static strength.
• UL 1034 and UL 10C 3-hour fire listed; body-only design fits existing 1600 series faceplates.

HES · 1600-605

HES Electric Strike Body Only Bright brass - 1600-605

When you need to replace a failed strike body in an existing HES 1600 series installation without tearing out the entire frame prep, this body-only

• Body-only swap preserves existing 1600 series faceplate and frame prep, cutting service labor.
• 1,500 lb static strength with UL 1034 and UL 10C 3-hour fire listing meets code requirements.
• 12/24V DC field-selectable operation draws just 0.13 A at 24V, minimizing panel load impact.

HES · 152:UNIVERSAL MOUNTING TABS

HES 152:UNIVERSAL MOUNTING TABS - Mount inside hollow metal

Installing electric strikes in hollow metal frames without proper backing creates flex, misalignment, and premature failure

• Solid backing inside hollow metal frames prevents strike flex and misalignment.
• Eliminates field welding or custom fabrication, reducing installation labor and risk.
• Distributes fastener loads across frame cavity to extend strike service life.

HES · 150:STRIKE LATCH GUARD

HES 150:STRIKE Latch Guard

Door frame gaps and misaligned strikes create vulnerabilities that undermine even the best electric strike installations

• Stainless steel (630 satin) construction withstands high-cycle commercial door use.
• Guides latchbolt into alignment, reducing intermittent failures and service calls.
• Surface-mounts between strike and frame to compensate for prep tolerances and settling.

HES · 1500C-BSP-LM

Hes 1500C-Bsp-Lm

• Fail-secure at power loss; 1,500 lb static strength meets institutional force requirements.
• LM monitor output delivers real-time latch status to access control panels and audit logs.
• 12/24V DC field-selectable voltage simplifies integration with existing power supply infrastructure.

HES · 1500C-BSP

HES 1500 Series Electric Strike Latchbolt Lock - 1500C-BSP

When you need reliable fail-secure latchbolt control in hollow metal or wood frames, the HES 1500 Series delivers field-proven performance without

• Fail-secure mode keeps the door locked on power loss — critical for IT closets and perimeter doors.
• 12/24V DC field-selectable operation integrates directly with most access control panels.
• UL 1034 and UL 10C 3-hour fire-rated; 1,500 lb static strength for high-security frames.

HES · 1500C-630-DLMS

HES 1500C-630-DLMS Heavy Duty Electric Strike with Dual Lock

• Field-selectable 12/24V DC operation eliminates duplicate SKUs across mixed-voltage projects.
• DLMS provides independent fail-secure and fail-safe status feedback for supervised access panels.
• UL 1034 and UL 10C 3-hour fire-rated; 1,500 lb static strength meets Grade 1 requirements.

HES · 1500C-629-LMS

HES Complete Electric Strike Kit - 1500C-629-LMS

When retrofitting access control into existing openings or standardizing hardware across multi-building projects, component compatibility becomes the

• Complete kit—strike body, faceplate, lip, and hardware—eliminates mismatched component callbacks.
• LMS reports latch position and strike status to ACS panels, enabling forced-entry detection.
• Accepts 12/24 VDC or VAC with internal rectification; field-reversible for left or right hand.

HES · 1500C-612-LMS

Hes 1500C-612-Lms

• Fail-secure mode keeps the door locked on power loss, protecting perimeter security.
• 12/24V DC field-selectable voltage simplifies deployment across mixed control systems.
• LMS dual monitoring of lock and strike status supports real-time access control auditing.

HES · 1500C-612

HES 1500C Electric Strike Satin Bronze Clear Coated - 1500C-612

• Accepts 12VDC or 24VDC input, fitting existing access control panel wiring.
• Field-selectable fail-secure/fail-safe mode supports code-compliant egress design.
• Latchbolt monitoring delivers real-time door position feedback to control panels.

HES · 1200DDURO

HES Alarm Controls 1200DDURO Double Door Magnetic Lock DURO

• Single 12/24V DC unit secures both door leaves simultaneously at 600 lbs per leaf.
• Built-in door position sensor and bi-color LED confirm bond status without add-on hardware.
• UL Listed for Access Control with a lifetime warranty; integrates via dry contact relay.

HES · 10790036

Hes Fp:851m-629 - 10790036

When you need a fail-secure electric strike for single-door openings with limited frame depth, the HES FP:851M-629 delivers field-proven performance

• Direct-replacement faceplate for HES 851M mortise strikes cuts retrofit time significantly.
• Bright stainless steel (629) finish resists corrosion in high-contact commercial door environments.
• Field-installable design eliminates frame modifications when upgrading existing 851M installations.

HES · 10790034

Hes Fp:851m-612 - 10790034

• Fail-secure faceplate keeps openings locked on power failure
• Compact design fits tight door frame pockets and retrofits
• Medium-duty fit for 851M mortise lock in 612 finish

HES · 10790033

Hes Fp:851m-606 - 10790033

When you need a fail-secure electric strike for perimeter doors, high-traffic corridors, or stairwell applications where security cannot be

• Fail-secure operation keeps the door locked during power loss, meeting code requirements.
• Direct-replacement faceplate for 851M mortise lock bodies — no additional door prep needed.
• Satin brass (606) stainless steel finish resists corrosion in high-traffic commercial interiors.

HES · 10790032

Hes Fp:851m-605 - 10790032

• Direct-replacement faceplate for 851M mortise lock reduces downtime during field service.
• 605 bright brass finish delivers corrosion resistance for visible, customer-facing openings.
• Stainless steel construction withstands high-cycle wear in medium-duty commercial frames.

HES · 10790031

Hes Fp:851m-630 - 10790031

• Satin stainless steel (630) finish resists corrosion in high-traffic commercial installs.
• Direct-replacement fit for HES 851M mortise locks eliminates new door prep or pocket cuts.
• Field-installable design reduces truck rolls and simplifies retrofit access control upgrades.

HES · 10790026

Hes Fp:852m-629 - 10790026

When you're specifying access control for perimeter entries, lobbies, or suite doors with metal frames, you need an electric strike that holds

• Stainless steel faceplate provides durable, corrosion-resistant performance at the strike point.
• Direct-replacement fit for 852M mortise lock allows field installation without frame rework.
• 629 bright stainless finish coordinates with architectural hardware in commercial environments.

HES · 10790024

Hes Fp:852m-612 - 10790024

• Stainless steel faceplate in 612 Satin Bronze finish resists corrosion in commercial frames.
• Direct-replacement design for 852M mortise locks eliminates frame modification or rework.
• Field-installable trim reduces swap-out time during scheduled maintenance or hardware upgrades.

HES · 10790023

Hes Fp:852m-606 - 10790023

When you're specifying access control for commercial door applications requiring reliable fail-secure operation, the HES FP:852M-606 delivers proven

• Fail-secure design keeps doors locked during power loss, protecting perimeter zones.
• Direct-replacement faceplate for HES 852M mortise strikes installs without frame rework.
• 606 satin brass stainless steel finish coordinates with standard architectural hardware.

HES · 10790022

Hes Fp:852m-605 - 10790022

• Stainless steel construction resists wear in high-cycle commercial door applications.
• Direct field-installable replacement for 852M mortise lock strikes reduces downtime.
• 605 bright brass finish matches standard hardware for consistent frame aesthetics.