Middle Atlantic RC7CTCGY Poke-Thru Floor Device

The Middle Atlantic RC7CTCGY is a prewired, multi-service poke-thru device that brings a 20A duplex power receptacle and Cat6 keystone data ports up through the floor in a single gray-finish assembly. It's built for conference rooms, open-plan offices, and training rooms where cable trays and wall runs aren't an option and power/data need to land at a table or floor box in the middle of the room. RC7CTCGY ships assembled and prewired, which cuts the field labor of terminating receptacles and jacks on site.

Key Features

• 20A duplex receptacle: handles two standard grounded plugs at a combined 20A circuit rating — enough headroom for AV carts, laptops, and presentation gear sharing one drop without tripping a breaker.
• Prewired Cat6 keystones: data jacks arrive terminated at the factory, so the only fieldwork is landing the horizontal cable run and setting the unit in the floor cutout — fewer on-site termination errors.
• 3 1/16'' (78mm) cutout diameter: a tight, standardized core-drill spec that simplifies coordination with the general contractor or concrete crew before the floor is finished.
• 1/8'' minimum floor covering thickness: confirms the device seats correctly under carpet tile or comparable finish flooring — worth checking against your finish schedule before ordering if you're running thicker material.
• Gray finish: a neutral cover finish that blends into most commercial flooring and carpet tones rather than standing out as a visible fixture.
• TAA compliant: relevant for government, education, and other public-sector projects with Trade Agreements Act sourcing requirements written into the procurement spec.
• 6.00 lbs assembled weight: light enough for one installer to set and level in the floor opening without rigging.

Integration & Compatibility

RC7CTCGY pairs naturally with a broader AV over IP or conference room buildout where power and structured cabling need to surface at a table rather than a wall plate. If you're planning the rest of the room, a cable and connectivity selection guide is worth reviewing alongside this device to confirm patch cable and keystone compatibility with your existing Cat6 infrastructure. For adjacent commercial AV hardware, browse the broader Middle Atlantic catalog for matching furniture and mounting accessories, or check mounting solutions if the room also needs equipment racks or enclosures. RC7CTCGY is backed by a 2-year warranty, and every unit sold is factory-new — no grey-market, no parallel imports.

Frequently Asked Questions

Q: What's the warranty on the RC7CTCGY?

A: The RC7CTCGY carries a 2-year manufacturer warranty.

Q: Is the RC7CTCGY TAA compliant?

A: Yes, the RC7CTCGY is TAA compliant, which matters for public-sector and government procurement specs requiring Trade Agreements Act sourcing.

Q: What size cutout does the RC7CTCGY need?

A: It requires a 3 1/16'' (78mm) diameter cutout in the floor.

Q: What's the minimum floor covering thickness for the RC7CTCGY?

A: The unit requires a minimum floor covering thickness of 1/8''.

Q: What kind of power and data does the RC7CTCGY provide?

A: It provides a prewired 20A duplex power receptacle along with Cat6 keystone data jacks.

Q: How much does the RC7CTCGY weigh?

A: The assembled unit weighs 6.00 lbs.

James Everett

The RC7CTCGY is a straightforward spec once you've got the floor plan in front of you: a prewired 20A duplex outlet and Cat6 keystones in one gray poke-thru housing. What matters here isn't a feature list — it's whether the cutout and cover thickness line up with your finish schedule.

Technical Highlights:

• 20A duplex receptacle: covers two devices on one circuit without derating concerns for typical laptop/AV cart loads.
• 3 1/16'' (78mm) cutout diameter: a tight core-drill spec — coordinate this with the concrete or flooring subcontractor before the slab or subfloor is finished, not after.
• 1/8'' minimum floor covering thickness: the device is designed to seat flush under thin finish flooring; thicker carpet tile or hard flooring should be checked against this minimum before the order is placed.

Deployment Considerations:

• Because the unit ships prewired and assembled, on-site labor is mostly limited to core drilling to the 3 1/16'' spec, running the Cat6 home run, and setting the unit — plan the cutout location during rough-in, not after flooring goes down.
• The 1/8'' minimum floor covering figure is a hard constraint, not a suggestion — verify it against the specified carpet or tile thickness before finalizing the floor plan, since a mismatch means a return trip to the site.

A reasonable fit for a conference room or open-plan office retrofit where power and Cat6 need to surface at a floor box mid-room rather than routed to a wall — particularly on projects with a TAA sourcing requirement in the spec.