Geovision GV-MOUNT211-2 GV-MOUNT211-2 Wall Mount Bracket Kit

Geovision GV-MOUNT211-2 Wall Mount Bracket Kit

Overview

The Geovision GV-MOUNT211-2 is a wall-mounted bracket and junction box assembly designed to secure Geovision DVR and NVR equipment in control rooms, equipment rooms, or distributed site installations. At 253 × 125 × 125 mm (10" × 4.9" × 4.9") and weighing 0.92 kg, it's compact enough for confined spaces while providing a rigid mounting platform. The integrated junction box simplifies cable management by consolidating conduit entry points, reducing visible wire runs behind mounted equipment.

Compatibility

Purpose-built for Geovision DVR and NVR devices. Consult the Geovision accessory compatibility matrix or your reseller for exact recorder models supported by this bracket. The mount accommodates standard wall stud or masonry installation using the supplied hardware. Pole and pendant mounting are also possible when combined with compatible secondary brackets (e.g., GV-Mount420 pole mount bracket or GV-Mount107 pendant bracket), allowing flexibility across different site configurations without requiring multiple bracket SKUs.

Installation Notes

The kit includes five long screws, four short screws, five screw anchors, one plastic PG21 conduit connector, and a drill template sticker. The PG21 connector accommodates standard conduit diameters for cable entry. Use the included drill template to mark mounting holes accurately before drilling; this prevents misalignment that can stress connector threads or shift the junction box. Verify wall surface load capacity before installation—masonry walls handle full weight without issue, but drywall installations may require additional backing or toggle anchors depending on local building codes and the combined weight of the recorder plus bracket.

What's in the Box

• 1x GV-MOUNT211-2 bracket and junction box assembly
• 5x long mounting screws
• 4x short mounting screws
• 5x screw anchors
• 1x plastic PG21 conduit connector
• 1x drill template sticker