Geovision GV-MOUNT208-51 Swan Neck Mount
Overview
The Geovision GV-MOUNT208-51 is a swan neck mount designed to support flexible camera positioning in surveillance mounting applications. This accessory solves the alignment problem common in PTZ camera deployments: achieving precise directional aim without rigid fixed brackets that lock you into a single view angle. The 1043 × 565 × 256 mm frame (41.06 × 22.24 × 10.08 inches) provides the reach and articulation needed for mid-to-large format PTZ camera systems, letting you position the camera head independently of the base mounting point — critical when your ideal sightline conflicts with available wall or ceiling geometry.
Compatibility
Engineered for Geovision IP PTZ camera systems. The mount accommodates standard surveillance installation practices where directional adjustment and precise aiming are required. Verify exact camera model compatibility with your specific PTZ unit before purchase — swan neck geometry varies by manufacturer, and forcing an incompatible pairing will result in unsafe cantilevered load or inability to achieve full pan/tilt range. Compatible with cable management for IP PTZ deployments using standard RJ-45 shielded runs and auxiliary power leads.
Installation Notes
The GV-MOUNT208-51 weighs 10.6 kg (23.37 lb) — account for this in your bracket and fastener selection. Wall and ceiling mounting both require structural fasteners rated for the combined weight of the mount plus your camera head (typically 2–5 kg additional). Ensure the installation surface can accept ½-inch or larger anchors depending on wall type (concrete, steel, or studs). The swan neck design concentrates load at the base connection point; do not exceed the manufacturer's specified camera weight limit or you risk mechanical fatigue in the neck tube. Route cables through the interior passage where possible to avoid external routing that can catch or create trip hazards during maintenance access. Allow minimum 200 mm clearance above and beside the neck for pan/tilt rotation if the camera will reach those positions during operation.
What's in the Box
- 1× GV-MOUNT208-51 Swan Neck Mount assembly
