Geovision GV-MOUNT503-150 Ceiling Mount Bracket
Overview
The GV-MOUNT503-150 is a ceiling-mount bracket designed for fixed Geovision surveillance cameras. This accessory provides stable, adjustable positioning for dome and fixed-form-factor cameras in indoor ceiling installations — typical in retail floors, corridors, and commercial spaces where overhead mounting is the only practical option. The bracket supports standard Geovision camera form factors and enables tilt/pan adjustment during installation to achieve optimal coverage angle without requiring wall or pole mounting.
Compatibility
The GV-MOUNT503-150 integrates with Geovision fixed camera lines, including the GV-ABL, GV-TBL, GV-ADR, GV-TDR, GV-AVD, GV-TVD, GV-EBD, and GV-EBDP series. Verify your specific camera model against the compatible list in the camera manual before purchase — dome form factor and threaded mounting interface are required for this bracket to function.
Installation Notes
Mount the bracket to a standard ceiling structure using appropriate anchors for your ceiling material (drywall, concrete, or drop ceiling). Ensure the mounting surface can support the combined weight of the bracket and camera (typical camera weight ranges from 0.5 to 2 lbs). Adjust the bracket's tilt mechanism to position the camera lens at the required angle — most installations allow roughly 30° of adjustment. No external power or wiring is needed for the bracket itself; route camera cabling separately through ceiling cavities or conduit as required by local installation codes.
