Middle Atlantic Forward 35U Rail DWR Pair - FWD-DWR-RR35

Middle Atlantic FWD-DWR-RR35 35U Forward Rack Rail for DWR Series

The FWD-DWR-RR35 is a 35U steel forward rack rail designed specifically for Middle Atlantic DWR series enclosures. At 61.25 inches tall and sold as a pair, it extends the usable mounting depth in DWR wall-rack installations — the right component when you need to mount front-heavy gear flush to the door plane rather than relying solely on the fixed rear rail position. If you're building out a Middle Atlantic rack system with equipment that requires forward positioning, this is the rail that makes it possible.

Key Features

• 35U Capacity (61.25 in / 155.6 cm): Matches the full vertical run of a 35U DWR enclosure — you get rail coverage from top to bottom without gaps or spacers, which matters when you're mounting multiple units across the full height of the rack.
• Forward Rack Rail Design: Positions equipment at the front plane of the enclosure rather than mid-depth. This is critical for gear with front-access cable management or display panels — AV equipment, patch panels, and shallow 1U appliances that don't need rear rail support.
• Steel Construction with Black E-Coat Finish: Cold-rolled steel with an electro-coat (e-coat) finish resists corrosion and handles the mechanical stress of repeated equipment swaps without deforming or losing thread integrity. E-coat is more durable than standard powder coat in enclosed environments where airflow is limited.
• DWR Series Compatibility: Engineered specifically for the DWR base series — drop-in fit without drilling or modification. Mismatched aftermarket rails in wall enclosures are a common source of alignment headaches; using the purpose-matched rail eliminates that risk entirely.
• Sold as a Pair: Both left and right rails included, so you're not sourcing them separately or worrying about handed orientation. Standard rack spacing is maintained out of the box.
• Shipping Weight 8 lbs (3.6 kg): Practical for a single installer to handle during overhead or high-wall-mount installations — no two-person lift required just to stage the rails.

Integration & Compatibility

The FWD-DWR-RR35 (often searched as FWD DWR RR35) is designed for use within Middle Atlantic rack accessories infrastructure, specifically the DWR series wall enclosures. If you're specifying a complete wall-rack build for a security head-end, AV rack, or network closet, pair these rails with the matching DWR enclosure and consult a rack planning guide to confirm equipment depth requirements before ordering. Standard EIA 19-inch rack unit spacing applies, so most 1U–4U commercial gear mounts without adapters. These rails do not apply to SR series enclosures — confirm your base series before ordering.

Frequently Asked Questions

Q: What enclosure series is the FWD-DWR-RR35 designed for?

A: The FWD-DWR-RR35 is designed specifically for Middle Atlantic DWR series wall enclosures. It is not rated for SR series enclosures — verify your base series before ordering.

Q: How many rack units does the FWD-DWR-RR35 support?

A: 35U, spanning 61.25 inches (155.6 cm) in total height.

Q: Is the FWD-DWR-RR35 sold as a single rail or a pair?

A: It is sold as a pair — both left and right forward rails are included in the package.

Q: What material and finish does the FWD-DWR-RR35 use?

A: Steel construction with a black e-coat finish, which provides corrosion resistance and mechanical durability in enclosed rack environments.

Q: What is the shipping weight of the FWD-DWR-RR35?

A: 8 lbs (3.6 kg) per the manufacturer specification.

Eden Phillips

The FWD-DWR-RR35 is one of those components that integrators overlook until a project hits the field — at 61.25 inches, it covers the full vertical run of a 35U DWR wall enclosure without any shimming or field modification, and the e-coat steel holds up where powder coat often chips at the rail-to-enclosure contact points during repeated equipment swaps.

Technical Highlights:

• 61.25 in / 35U Height: Exact match to the DWR 35U enclosure height — no partial coverage, no gaps at the top or bottom where lightweight gear tends to sag without rail support.
• Steel E-Coat Construction: More resistant to corrosion and mechanical wear than standard painted rails — relevant in telecom closets and security head-ends where humidity and cable congestion are ongoing factors.
• Sold as a Pair: Left and right rails ship together at 8 lbs combined — one package, one line item, no asymmetric ordering headache on large multi-rack deployments.

Deployment Considerations:

• Confirm your DWR enclosure model before ordering — these rails are purpose-matched to the DWR base series and will not drop into SR series enclosures without modification.
• Forward rail positioning moves equipment to the front door plane, which is the right choice for shallow gear and patch panels but may create depth conflicts with deep UPS units or NVRs that need rear rail support — plan equipment layout before committing to forward-only rail configuration.

Best fit for security integrators building out 35U DWR wall-rack head-ends in commercial facilities where front-access equipment layout and clean cable management at the door plane are project requirements.