Hubbell DFHRCLCSCS2SM Fiber Optic Riser Rated Single Mode Duplex LC-SC 2 Meters Yellow

Overview

The Hubbell DFHRCLCSCS2SM is a 2-meter, duplex, single-mode fiber optic patch cable. It features LC connectors on one end and SC connectors on the other, terminated with a riser-rated yellow jacket. This cable is designed for reliable data transmission in structured cabling systems, particularly where runs between patch panels and active equipment are required. Its specific connector configuration simplifies direct connections between devices with disparate port types, reducing the need for intermediate media converters in certain deployments.

Compatibility

This cable is compatible with any network switch, server, fiber optic transceiver, or media converter that utilizes standard duplex LC (e.g., SFP, SFP+) and SC fiber optic interfaces. The single-mode fiber type is intended for longer-distance runs, typically exceeding 300 meters, and requires corresponding single-mode transceivers or ports. The riser-rated jacket makes it suitable for use within building infrastructure, adhering to fire safety standards for vertical runs.

Installation Notes

When installing, ensure the bend radius of the cable is not compromised, especially at termination points, to maintain signal integrity. The minimum bend radius for single-mode fiber is typically 1 inch (25.4 mm). Avoid sharp kinks or excessive tension on the cable. Ensure connectors are clean before mating to prevent signal loss or damage to the fiber end-face.