Panduit CFPL6IWY 6-Port Single Gang Faceplate

Overview

The Panduit CFPL6IWY is a 6-position single-gang faceplate designed for structured cabling installations where a clean, permanent termination point is required at the work area or equipment rack. Measuring 4.50 in. H × 3.28 in. W × 0.66 in. D, it fits standard single-gang wall boxes and low-voltage brackets — the form factor that keeps cable management flush and organized rather than leaving patch leads dangling from an open knockout.

At 0.56 lb per 10-piece pack (approximately 0.056 lb each), the CFPL6IWY is light enough that wall-box loading is never a concern, yet the Panduit construction delivers the rigidity expected in commercial-grade cabling infrastructure. If you are specifying faceplates for a structured cabling project across multiple drops, the per-10 packaging simplifies inventory management on larger pulls.

Key Features

• 6-Position Capacity: Six ports in a single-gang footprint gives you flexibility to terminate multiple drops at a single outlet location — useful in conference rooms, security workstations, or any location where multiple data, voice, or low-voltage connections converge at one point without requiring a double-gang box.
• Single-Gang Form Factor (3.28 in. × 4.50 in.): Fits standard single-gang electrical boxes and low-voltage rings already roughed in during construction — no special box or adapter required, which keeps installation straightforward for any structured cabling crew.
• Shallow Depth (0.66 in.): The 0.66-inch profile keeps the faceplate flush to the wall surface even in shallow-depth boxes, reducing the risk of strain on terminated connectors behind the plate.

Integration & Compatibility

The CFPL6IWY is part of Panduit's structured cabling line and is designed to accept Panduit Mini-Com or compatible keystone modules — coordinate module selection with your cabling standard (Cat6A, fiber, coax, or multimedia) before ordering. Confirm keystone module compatibility against Panduit's current Mini-Com lineup to ensure snap-in fit. This faceplate is suitable for commercial cabling infrastructure deployments including security operations centers, IDF/MDF structured outlet fields, and workstation drops on patch panel-based horizontal cabling runs.

Frequently Asked Questions

Q: How many ports does the CFPL6IWY support?

A: The CFPL6IWY supports 6 positions in a single-gang form factor.

Q: What wall box does the CFPL6IWY fit?

A: It fits standard single-gang electrical boxes and low-voltage mounting brackets. The faceplate measures 4.50 in. H × 3.28 in. W × 0.66 in. D.

Q: What type of modules does the CFPL6IWY accept?

A: The CFPL6IWY is designed for use with Panduit Mini-Com keystone modules. Verify specific module compatibility with Panduit's current product lineup for your cabling type (copper, fiber, coax).

Q: How is the CFPL6IWY packaged?

A: The CFPL6IWY is sold and weighed in 10-piece increments, with a weight of 0.56 lb (253.8 g) per 10-piece pack.

Q: Can the CFPL6IWY be used in a security operations center or surveillance workstation?

A: Yes. The 6-port single-gang form factor is well suited to any structured cabling outlet where multiple low-voltage or data connections terminate at a single wall location, including surveillance and security workstation drops.

Jerry Tildsen

The CFPL6IWY packs six termination positions into a standard single-gang footprint — that 3.28 in. × 4.50 in. × 0.66 in. profile is the detail that matters when you're working with already-roughed-in single-gang boxes and have no room to upsize the box cut.

Technical Highlights:

• 6-Position Single-Gang: Six ports in 3.28 in. of width means you're not pulling a double-gang box for multi-drop outlet locations — saves box cost and drywall work on large installations.
• 0.66 in. Depth: Shallow enough to sit flush even in minimum-depth low-voltage rings, which keeps connector stress low on whatever keystone modules you snap in.
• 0.056 lb per unit: Negligible wall-box loading — relevant when you're stacking multiple accessories on a single bracket in a dense outlet field.

Deployment Considerations:

• Confirm your keystone module selection matches the CFPL6IWY's Mini-Com snap-in pattern before ordering in bulk — mixing faceplate and module brands can result in loose fit or misaligned port labeling.
• The 6-position count is the maximum for this single-gang plate; if your outlet design grows past six drops, you'll need a double-gang or multi-gang solution — plan for that early in the rough-in stage.

The CFPL6IWY is the right call for structured cabling outlet fields in security operations centers or surveillance workstation rows where multiple drops (data, voice, low-voltage) converge at a single wall location and space for a double-gang box was never planned into the build.