Panduit FAP3WBUDLCZ Front-Access LC Duplex Fiber Adapter Panel

Overview

The Panduit FAP3WBUDLCZ is a front-loading fiber adapter panel from the Opticom™ series, designed to terminate three LC duplex connections in a chassis-mount footprint that complies with EIA-310 and IEC 60297 rack standards. At 1.38 inches tall and 4.3 inches wide, this panel slots into compatible Panduit fiber enclosures and patch panels, providing a clean, serviceable front-access port interface without pulling the chassis. The blue LC duplex adapters are factory-fitted and keyed for OS2 single-mode deployments — though the panel's adapter body is physically compatible with OM1, OM2, OM3, and OM4 multimode fiber as well, giving you flexibility if the cabling plant spans mixed fiber types across a campus or data center.

For integrators managing structured cabling in fiber optic panel installations, this unit handles the termination side efficiently. It ships as a single panel (package quantity: 1) and is available in carton quantities of 10, making it practical for both single-rack builds and larger deployments requiring consistent panel population.

Key Features

• Front-Load Access: The front-loading adapter design means technicians can swap or inspect connections from the front of the rack without disturbing rear cable management — a real time-saver in dense data center rows where rear access is restricted or cabling is tightly bundled.
• LC Duplex, 3-Port Configuration: Three LC duplex ports provide six fiber strands per panel. For backbone runs or horizontal distribution, this translates to three bidirectional links per 1U slot allocation — useful when port density needs to match a specific switch or transceiver count without over-provisioning panel real estate.
• OS2 Single-Mode Optimized: The blue adapter designation confirms OS2 single-mode keying, supporting long-distance runs typical in campus backbones, inter-building links, and WAN handoffs where multimode reach limits are a constraint. OS2 supports distances up to 10 km on 10GbE and beyond on higher-speed transceivers.
• Broad Fiber Compatibility (OM1–OM4/OS2): While optimized for OS2, the FAP3WBUDLCZ accepts OM1 through OM4 connectors physically, making it a usable termination point in hybrid fiber environments where legacy multimode runs coexist with newer single-mode infrastructure. Verify transceiver compatibility separately — the panel itself won't restrict insertion.
• EIA-310 / IEC 60297 Compliance: Mechanical conformance to these rack standards means the panel seats correctly in any EIA-310-compliant enclosure — standard 19-inch open-frame racks, enclosed cabinets, and wall-mount frames from Panduit or third-party vendors are all viable homes for this panel without adapter plates or shimming.
• RoHS Compliance: The panel meets RoHS directives, which matters for deployments in regulated environments (government facilities, EU projects, LEED-rated buildings) where material restrictions apply to installed infrastructure components.
• Compact 1.38-Inch Profile: The 35.2 mm height means this panel occupies minimal vertical rack space — relevant in enclosures where U-space is at a premium and every millimeter between patch panels and active equipment counts.
• Opticom™ Series Integration: As part of Panduit's Opticom™ fiber management line, this panel is engineered to work within the broader Panduit fiber infrastructure ecosystem, including compatible cassettes, enclosures, and cable management accessories — reducing the guesswork when populating a standardized cabling system.

Integration & Compatibility

The FAP3WBUDLCZ is designed for use within Panduit Opticom™ front-access fiber enclosures and compatible chassis. Confirm the target enclosure's adapter panel slot dimensions before ordering — this panel's 4.3-inch (109.1 mm) width and 1.38-inch (35.2 mm) height define its chassis fit. The LC duplex adapter ports accept standard LC connectors; OS2 (yellow) patch cords are the correct match for single-mode links, while OM1–OM4 (orange or aqua) patch cords can be inserted for multimode continuity if the downstream fiber supports it.

This panel works with any fiber optic enclosure or rack cabinet that meets EIA-310 or IEC 60297 rack standards. It does not include patch cords, fiber jumpers, or mounting hardware beyond the panel itself — plan your fiber patch cable and enclosure procurement separately. For high-density LC deployments, consider populating multiple panels within a single Panduit enclosure chassis to scale port count without adding rack units.

What's in the Box

• 1x Panduit FAP3WBUDLCZ Opticom™ Front-Access LC Duplex Fiber Adapter Panel

Frequently Asked Questions

Q: What fiber types does the FAP3WBUDLCZ support?

A: The FAP3WBUDLCZ is compatible with OM1, OM2, OM3, OM4, and OS2 fiber. The blue LC duplex adapters are keyed for OS2 single-mode, but the panel will physically accept multimode LC connectors from OM1 through OM4 as well.

Q: Does the FAP3WBUDLCZ comply with standard rack requirements?

A: Yes. The panel meets EIA-310 and IEC 60297 rack standards, making it compatible with standard 19-inch EIA-310-compliant enclosures and cabinets from Panduit and most third-party rack vendors.

Q: Is the FAP3WBUDLCZ RoHS compliant?

A: Yes. The FAP3WBUDLCZ carries RoHS compliance, making it suitable for installations in regulated environments where hazardous substance restrictions apply to infrastructure components.

Q: How many fiber connections does this panel support?

A: The panel provides three LC duplex ports, accommodating six individual fiber strands — three bidirectional links in total per panel.

Q: What enclosure is this panel designed for?

A: The FAP3WBUDLCZ is part of Panduit's Opticom™ series and is designed for use in compatible Panduit front-access fiber enclosures and chassis. The panel measures 4.3 inches wide and 1.38 inches tall — verify these dimensions match the target enclosure's adapter panel slot before ordering.

Q: Does the FAP3WBUDLCZ include patch cords or mounting hardware?

A: No. The package contains one adapter panel only. Patch cords, fiber jumpers, and enclosure hardware must be sourced separately.