ACTI Exterior Fixed Dome - Acs-E1CB-Adu-Bosch-Pb-NDE5704AL-Hrn

ACTi ACS-E1CB-ADU-BOSCH-PB-NDE5704AL-HRN Exterior Fixed Dome

Overview

The ACS-E1CB-ADU-BOSCH-PB-NDE5704AL-HRN is an exterior dome housing assembly designed to integrate Bosch NDE5704AL camera modules into a weather-sealed mounting platform. This unit solves the integration problem when you need to combine Bosch imaging sensors with a standardized ACTi dome enclosure for consistent mounting and environmental protection across multi-vendor deployments.

Compatibility

This assembly is purpose-built to house the Bosch NDE5704AL camera module. The dome and mounting frame support standard corner and ceiling-mount installation patterns. Verify your NDE5704AL module serial number and revision level match the assembly revision before integration — mismatched firmware or sensor generations can cause timing or compatibility issues during commissioning.

Installation Notes

The exterior dome rating depends on the sealed gasket condition and proper cable entry management. Route all cabling through the integrated conduit ports using weather-sealed connectors or cable glands to maintain the weatherproof integrity. Avoid over-tightening the dome lens ring — most dome assemblies specify torque limits around 2–4 Nm to prevent internal stress on the sensor window. Mounting height and angle affect both optical performance (avoid direct sun glare on the lens) and cleaning access (elevation simplifies maintenance). Test the complete assembly with the camera module installed before final deployment to verify sensor alignment and focus.