Panduit CFPE4IGY Mini-Com Executive 4-Port Single Gang Faceplate
Overview
The Panduit CFPE4IGY is a four-port, single-gang faceplate from the Mini-Com® Executive Series, designed to terminate structured cabling runs cleanly inside NEMA standard single-gang wall openings. Whether you're finishing out a conference room, open-plan office, or a structured IDF/MDF patch zone, this faceplate gives you a polished, port-labeled termination point that accommodates any four Mini-Com Modules — RJ45 data, fiber, coax, USB, or mixed media — without requiring a custom plate per outlet type.
Part of Panduit's Pan-Net® copper systems line, the CFPE4IGY ships in international gray ABS — a neutral finish that reads professional against standard white or gray wallplates throughout a building. RoHS-compliant construction means it's cleared for installations where environmental materials compliance is a procurement requirement.
Key Features
- Four Mini-Com Module Slots: Accepts any combination of four Mini-Com modules — data, fiber, coax, audio, USB — in a single outlet. This modularity means you can configure the same faceplate differently per room or desk without stocking a separate SKU for every port layout.
- Single-Gang NEMA Standard Mount: Fits any standard single-gang electrical box opening (the same rough-in used by standard North American outlet boxes). No special rough-in, no adapter plate — drop it into existing infrastructure without a second trip to the wall.
- Raised Rail Frame Design: The outer edge of the frame features a raised rail profile, which adds rigidity to the ABS body and gives the installed plate a finished, commercial-grade appearance. On high-traffic walls — think hallway data drops or under-desk outlets — the rail keeps the face looking intact under incidental contact.
- Label Pocket: Built-in label pocket on the face allows port identification without adhesive labels that peel or smear. In any environment where cable management audits happen (data centers, managed office spaces, school IT rooms), readable port labels reduce troubleshooting time and mispatching errors.
- International Gray ABS: The neutral international gray color coordinates across commercial interior finishes without the warm undertone of ivory or the clinical look of pure white. ABS construction is dimensionally stable — it won't warp or yellow under normal ambient temperature cycling the way cheaper plastics can.
- RoHS Compliant: Meets Restriction of Hazardous Substances requirements. Relevant for any installation where materials compliance documentation is collected at project closeout — EU-destined projects, government facilities, LEED-tracked buildings.
- Individual Package Qty of 1, Carton Qty of 10: Sold individually but cartonized in tens, which aligns with standard pull quantities for most floor-by-floor or zone-by-zone cabling deployments. Order multiples of ten to avoid partial-carton breakage on large jobs.
Integration & Compatibility
The CFPE4IGY is purpose-built for the Panduit Mini-Com® module ecosystem. It does not accept Panduit Mini-Jack, KeyConnect, or third-party keystone modules — the Mini-Com rail geometry is proprietary to the Mini-Com series. If your installed base uses a different Panduit module format, verify the module family before ordering faceplates. Within the Mini-Com line, any module variant (Cat 5e, Cat 6, Cat 6A, fiber LC/SC, coax F-type, HDMI, USB-A/C) seats and locks into the CFPE4IGY's four ports without tools.
The single-gang NEMA mounting pattern is universal to North American and many international wall box standards — it mounts to 1-gang mud rings, surface raceway outlet boxes, or standard 2x4 stud-mounted boxes with equal fit. For high-port-density drops, the 4-port capacity in a single gang is the practical ceiling; if you need more than four ports at one location, consider a two-gang Mini-Com Executive faceplate in the same series.
What's in the Box
- 1x Panduit CFPE4IGY Mini-Com Executive 4-Port Single Gang Faceplate (international gray)
Frequently Asked Questions
Q: What modules does the CFPE4IGY accept?
A: The CFPE4IGY accepts four Mini-Com® Modules. It is compatible with the full Panduit Mini-Com module family — including Cat 5e, Cat 6, Cat 6A, fiber, coax, USB, and HDMI variants. It is not compatible with Panduit Mini-Jack, KeyConnect, or third-party keystone modules.
Q: Does the CFPE4IGY fit a standard single-gang electrical box?
A: Yes. The CFPE4IGY mounts to a NEMA standard single-gang opening, making it compatible with standard 1-gang mud rings, surface raceway boxes, and conventional stud-mounted electrical boxes used throughout North America and many international markets.
Q: Is the CFPE4IGY RoHS compliant?
A: Yes. The CFPE4IGY meets RoHS (Restriction of Hazardous Substances) compliance requirements, making it suitable for installations where materials compliance documentation is required at project closeout.
Q: What are the overall dimensions of the CFPE4IGY?
A: The CFPE4IGY measures 4.5 inches (114.3 mm) in height and 2.75 inches (69.9 mm) in width — standard single-gang faceplate dimensions.
Q: How many faceplates come per package and per carton?
A: Each package contains 1 faceplate. The carton quantity is 10, which aligns with zone-by-zone or floor-by-floor pull quantities on most structured cabling projects.
Q: Does the CFPE4IGY include Mini-Com modules?
A: No. The CFPE4IGY is the faceplate only — Mini-Com modules are ordered separately. This allows you to populate each of the four ports with whichever module type your cabling design requires.
The CFPE4IGY is the right call when you need four mixed-media termination points in a single-gang footprint and want the flexibility to swap module types post-installation without pulling new faceplates. The raised rail frame is a minor but real durability detail — on high-traffic walls or under-desk locations where plates take incidental contact, it prevents the face from flexing and cracking at the port cutouts over time.
Technical Highlights:
- 4-Port Mini-Com Capacity: Four independent module slots in a 4.5 × 2.75-inch single-gang body means you can run data + fiber + coax + USB to a single desk drop without a dual-gang box — keeps rough-in costs and wall real estate down.
- NEMA Single-Gang Mount: Drops into the same box opening as a standard North American outlet — no adapter hardware, no specialty mud ring. On retrofit projects where boxes are already roughed in, this is the fastest path to a clean termination.
- RoHS Compliance: Documented compliance ships with the product family, which closes the materials compliance checklist item on government, healthcare, and LEED-tracked jobs without chasing down a separate letter from procurement.
Deployment Considerations:
- The CFPE4IGY ships as faceplate only — budget Mini-Com modules as separate line items. On a 4-port drop populated with Cat 6A + fiber LC duplex, you're looking at two additional SKUs minimum per outlet location.
- Mini-Com module geometry is proprietary to the Mini-Com series. If the job site has a mix of Panduit module families (Mini-Jack or KeyConnect legacy installs), the CFPE4IGY will not accept those modules — audit the existing module type before specifying this faceplate on a retrofit.
The CFPE4IGY is particularly well-suited for conference room AV/data consolidation drops — four ports in one gang handles the typical data + HDMI + USB-C + coax combination that AV integrators run to conference tables, without requiring a larger box or a custom plate order.
