Vertiv GL48UEX-60140B-MM-SP 48U Rack Shock Pallet

Overview

The Vertiv GL48UEX-60140B-MM-SP is a 48U shock pallet engineered to protect rack enclosures during shipping and handling — the spec that matters most when moving fully or partially populated cabinets between facilities, staging areas, or data center floors. Sized for 600mm x 1400mm footprint enclosures and finished in black, it is purpose-matched to the Vertiv EX and compatible rack families of the same footprint class. For integrators and IT architects moving populated infrastructure, a shock pallet is not optional equipment — it is the difference between a clean commissioning and an RMA queue.

The GL48UEX-60140B-MM-SP (often searched as GL48UEX 60140B MM SP) targets environments where rack cabinets must survive forklift staging, freight carrier handling, or warehouse-to-floor moves without exposing installed equipment to uncontrolled vibration and impact forces. The 48U height designation means this pallet accommodates full-height cabinets — the enclosures most likely to carry dense, high-value payloads like blade chassis, high-density storage arrays, or stacked network infrastructure.

Key Features

• 48U Height Compatibility: Matches full-height rack enclosures — the configuration most commonly used in high-density compute and storage deployments. Using a shock pallet sized for the actual cabinet eliminates fit issues that compromise corner and base protection during transit.
• 600 x 1400mm Footprint: The 600mm-wide, 1400mm-deep spec aligns with standard EX-series enclosures in that footprint class, so there is no guesswork on dimensional fit. Mismatched pallets are a common cause of inadequate support during freight handling.
• Shock Attenuation Design: Shock pallets are constructed to absorb and distribute impact energy that standard wooden or plastic freight pallets transfer directly to the cabinet base and installed equipment. For populated racks, this matters — hard drives, GPU cards, and optical transceivers are all vulnerable to transit shock events.
• Black Finish: Matches the enclosure colorway of the EX line, which is a minor but relevant detail for organizations where consistent presentation in co-location or raised-floor environments is enforced by facility management.
• Purpose-Built for Vertiv EX Series: The GL48UEX-60140B-MM-SP is a manufacturer-designed accessory for the EX enclosure line, meaning interface geometry, load rating assumptions, and structural attachment points are designed around this cabinet family rather than adapted from a generic solution.

Integration and Compatibility

This shock pallet is matched to Vertiv EX-series rack enclosures with a 600mm x 1400mm footprint in the 48U height configuration. Before ordering, confirm your enclosure's exact width and depth dimensions — Vertiv offers EX enclosures in multiple footprints, and using the wrong shock pallet size negates the protection it provides. The GL48UEX-60140B-MM-SP is not a generic rack pallet; it is dimensionally and structurally specific to this cabinet class. If your deployment involves a 42U or alternate-depth EX variant, verify the correct shock pallet SKU against the enclosure model number before procurement. Pairing this pallet with the correct enclosure also ensures compliance with any shipping or carrier requirements Vertiv specifies for warranty-valid transit of populated cabinets.

For projects involving Vertiv infrastructure including EX-series rack enclosures, this pallet is the manufacturer-recommended transit protection accessory for this footprint class. If your project involves data center infrastructure procurement at scale, coordinating shock pallet quantities alongside enclosure orders avoids lead-time gaps that can delay staging timelines. For PoE and power planning within rack deployments, the network and PoE planning guide covers power distribution considerations relevant to populated cabinet builds. Additional server racks and cabinets are available if enclosure selection is still in progress.

Frequently Asked Questions

Q: What rack enclosure dimensions does the GL48UEX-60140B-MM-SP shock pallet fit?

A: The GL48UEX-60140B-MM-SP is designed for Vertiv EX-series rack enclosures with a 600mm wide x 1400mm deep footprint in the 48U height configuration. Confirm your enclosure dimensions before ordering — using an incorrectly sized shock pallet will not provide adequate transit protection.

Q: Is this shock pallet designed for populated or empty racks?

A: Shock pallets like the GL48UEX-60140B-MM-SP are particularly valuable when transporting populated or partially populated rack cabinets, where installed equipment is vulnerable to vibration and impact during freight handling. Empty cabinets carry lower risk but still benefit from shock attenuation during long-distance freight moves.

Q: Does the GL48UEX-60140B-MM-SP work with non-Vertiv rack enclosures?

A: This shock pallet is engineered and dimensioned for the Vertiv EX enclosure family in the 600 x 1400mm footprint. Compatibility with third-party enclosures of similar dimensions is not verified by the manufacturer and should be confirmed before use.

Q: Does this product include any mounting hardware or installation accessories?

A: Package contents for the GL48UEX-60140B-MM-SP are not detailed in available evidence. Contact a senior specialist for confirmed box contents before procurement if this is relevant to your project planning.

Q: Is the GL48UEX-60140B-MM-SP reusable across multiple shipments?

A: Reuse suitability depends on the condition of the pallet after initial use. Manufacturer guidance on reuse is not available in current evidence. For high-value repeated transit cycles, inspect the shock attenuation components for compression or structural damage after each use.

Ted Perry

The GL48UEX-60140B-MM-SP is one of those accessories that project managers skip in the BOM and regret when a populated 48U cabinet arrives at the data center floor with a bent rail or dead hard drive. The 600 x 1400mm footprint spec is non-negotiable — this pallet is sized for the EX-series enclosure family, and using it with a correctly matched cabinet is the only way to get the structural engagement the shock attenuation design depends on.

Technical Highlights:

• 48U Height Rating: Full-height cabinets carry the most equipment and the most transit risk. A shock pallet matched to the 48U form factor ensures the base load distribution is appropriate for the cabinet's actual footprint and mass.
• 600 x 1400mm Footprint Match: Dimensional specificity here is load-bearing — a pallet that doesn't match the cabinet base geometry won't engage corner support points correctly, which is where most transit damage originates.
• Black Finish (EX-Series Matched): Minor on the spec sheet, meaningful on the floor — co-location facilities and raised-floor data centers with strict presentation standards will not push back on a black pallet paired with a black EX enclosure.

Deployment Considerations:

• Verify your enclosure model number against the 600 x 1400mm footprint spec before ordering — Vertiv EX cabinets ship in multiple footprint configurations, and the wrong shock pallet provides no meaningful protection.
• For multi-cabinet rollouts, order shock pallets in the same procurement event as the enclosures — lead time mismatches between cabinet and pallet delivery are a common cause of staging delays on large infrastructure deployments.

The GL48UEX-60140B-MM-SP is the right call for any project moving 48U EX-series cabinets through a freight or warehouse-to-floor staging workflow — specifically where cabinets will be populated before transit or where carrier handling quality cannot be controlled.