Vertiv GL45UEX-60110B-MM-SP 45U Server Rack Enclosure

Overview

The Vertiv GL45UEX-60110B-MM-SP is a 45U EX Series server rack enclosure — 600mm wide by 1100mm deep — built for data center and network closet deployments where equipment density and structural integrity during transit both matter. The 600×1100mm footprint is a practical middle ground: deep enough to seat standard 1U servers, patch panels, and cable management arms without forcing tight cable bends at the rear, yet narrow enough at 600mm to fit in constrained equipment rooms where 800mm racks won't clear aisle or door constraints. It ships on a shock pallet, meaning the enclosure arrives at the installation site pre-protected against the vibration and impact events that cause bent frame rails and misaligned mounting strips in standard freight — a real concern when moving a 45U rack through a loading dock or up a service elevator.

The EX Series sits within Vertiv's infrastructure product line as a commercial-grade enclosure designed for enterprise IT environments. If you're specifying a server rack for a new equipment room build-out, the GL45UEX-60110B-MM-SP (often searched as GL45UEX 60110B MM SP) targets deployments where you need proven rack geometry, a standard black finish that blends with mixed-brand deployments, and confidence the unit arrives undamaged without expensive white-glove delivery arrangements.

Key Features

• 45U Height: 45U gives you enough vertical real estate to stack a full compute row — servers, top-of-rack switching, patch panels, and a 1U PDU — without splitting the deployment across two racks and doubling your cabling overhead. Most mid-size server deployments land between 20U and 40U populated, so you have room to grow without immediately reconfiguring.
• 600mm Width: Standard 600mm EIA width keeps this rack compatible with the overwhelming majority of rackmount equipment. If your equipment room has tighter row spacing or narrower floor tiles, 600mm clears where 800mm racks require aisle redesign.
• 1100mm Depth: 1100mm of usable depth accommodates high-density 1U servers with rear-facing PSUs, cable management arms, and rear PDUs simultaneously — eliminating the forced compromise between cable routing and equipment seating depth that 900mm racks impose.
• Shock Pallet Shipping: Factory-new enclosures shipped on a shock pallet absorb freight vibration that would otherwise deform mounting rails or damage pre-installed accessories. This matters most in multi-site rollouts where racks may transit via LTL freight rather than dedicated delivery.
• Black Finish: The black powder-coat finish integrates cleanly with mixed-vendor environments and standard raised-floor data center aesthetics — no repainting or panel mismatching.
• EX Series Build: The EX Series enclosure standard provides consistent power distribution and cable management accessory compatibility across the Vertiv ecosystem, simplifying accessory procurement when outfitting multiple racks.

Integration and Compatibility

The 45U, 600×1100mm form factor is compatible with standard EIA-310 rackmount equipment. The 1100mm depth supports both short-depth networking gear and full-depth servers in a single enclosure without depth adapters. When planning a data center infrastructure deployment, pair this enclosure with top-of-rack PDUs and cable management accessories sized to the 600mm width to avoid fitment issues at the vertical cable managers.

Frequently Asked Questions

Q: What are the external dimensions of the GL45UEX-60110B-MM-SP?

A: The enclosure is 600mm wide and 1100mm deep. Height corresponds to a 45U rack enclosure. Exact external height including top and base panels is not specified in available evidence — verify with Vertiv documentation for floor-space planning.

Q: Does the GL45UEX-60110B-MM-SP ship pre-assembled?

A: The unit ships on a shock pallet as a factory-new enclosure. Assembly state beyond shock-pallet protection is not specified in the available evidence.

Q: Is the GL45UEX-60110B-MM-SP compatible with standard EIA rackmount equipment?

A: Yes. The 600mm width and 45U height conform to standard EIA-310 mounting geometry, making it compatible with standard 1U, 2U, and higher rackmount servers, switches, and patch panels.

Q: Why does this rack ship on a shock pallet rather than standard freight?

A: Shock pallet shipping protects the enclosure frame and pre-installed mounting hardware from vibration and impact during LTL freight transit — particularly relevant for large enclosures where rail deformation during shipping can complicate equipment installation on arrival.

Q: Can this enclosure be used in a two-post or open-frame configuration?

A: The GL45UEX-60110B-MM-SP is a closed four-post rack enclosure. It is not designed for open-frame or two-post configurations.

Karl Wilson

The GL45UEX-60110B-MM-SP is one of those specification decisions that looks simple until you're standing in a loading dock watching a bent rack come off a freight truck. The 1100mm depth and shock pallet delivery are the two specs I'd focus on here — the depth gives you real flexibility on equipment seating without depth adapters, and the shock pallet means you're not gambling a $1,500+ enclosure on standard LTL handling.

Technical Highlights:

• 45U Capacity: Enough vertical space to build a complete compute row — servers, top-of-rack switch, patch panels, and rear PDU — without splitting across multiple enclosures and multiplying inter-rack cabling.
• 1100mm Depth: Seats full-depth servers with cable management arms and rear PDUs simultaneously. The extra depth over a 900mm enclosure eliminates the forced choice between cable routing and equipment seating position.
• Shock Pallet Transit: Factory-protected shipping specifically designed to prevent the frame deformation and rail misalignment that plague large enclosures shipped on standard freight pallets — meaningful for multi-site rollouts using LTL carriers.

Deployment Considerations:

• Verify door clearance before ordering — a 600mm-wide, 1100mm-deep, 45U enclosure requires planning for the depth plus door swing; 1100mm depth plus rear cable management can push total footprint past 1300mm in some configurations.
• The evidence does not specify included accessories (rails, PDU brackets, blanking panels) — confirm what ships in the box with your sales contact before assuming a ready-to-populate configuration.

This enclosure is the right call for a structured data center build-out or a dedicated server room expansion where transit protection and equipment density both matter — specifically in enterprise environments where racks ship via LTL to branch sites rather than arriving by white-glove delivery.