Vertiv GL42UEX-80110B-MM-SP 42U Shock Pallet Rack Enclosure

The Vertiv GL42UEX-80110B-MM-SP is a 42U shock pallet rack enclosure engineered for the physical transport and staged deployment of fully populated rack systems. Where standard open racks leave equipment exposed to vibration, impact, and tipping during freight or data-center moves, this enclosure integrates the pallet and protective structure into a single unit — reducing the logistics complexity of moving sensitive rack-mounted hardware from staging area to final installation. If you're coordinating a data-center migration, deploying a pre-configured security stack to a remote site, or shipping a pre-built NVR or server rack to a branch location, the GL42UEX-80110B-MM-SP is the structural solution that keeps the equipment inside intact when the freight carrier isn't gentle.

At 42U in height, this enclosure accommodates full-height rack builds — enough vertical space for a high-density mix of network video recorders, patch panels, PoE switches, and UPS units without requiring any equipment to be stripped out before transport. The 800mm width provides the internal clearance needed for deeper server and storage chassis that exceed the 19-inch rail standard in overall body width. The 1100mm depth ensures front-to-rear cable management, rear-mounted PDUs, and cable trays don't have to be removed before the unit ships — a meaningful time savings on complex pre-staged builds.

Key Features

• 42U Rack Height: Accommodates a full build of rack-mount equipment — no partial teardown required before transport. For a pre-configured rack enclosure headed to a branch office or remote data room, this means the equipment arrives ready to power on rather than requiring reassembly on-site.
• 800mm Width: Wider than the 600mm industry minimum, this dimension allows side-by-side cable management panels, wider server chassis, and accessories that would conflict with narrower enclosures. It also provides airflow margin for high-density thermal loads during operation post-installation.
• 1100mm Depth: Deep enough to contain rear-mounted PDUs, patch cords, and cable management arms fully dressed. Equipment doesn't need to be partially cabled out before a move — the enclosure contains the full depth of a typical high-density build.
• Shock Pallet Form Factor: The integrated pallet base is the defining feature here. Rather than placing a rack on a separate pallet and strapping it down — a setup that can shift during freight — the shock pallet design absorbs and distributes transport vibration and impact as a single engineered unit. This matters on long-haul freight or intermodal shipments where vibration cycles are sustained.
• Black Finish: Standard data-center and equipment-room coloration — no finishing steps needed for professional installations where appearance at the final site matters.
• Built for High-Density Deployment: The combination of 42U height, 800mm width, and 1100mm depth supports the kind of fully populated builds — dual-PSU servers, top-of-rack switches, and storage arrays — that represent the heaviest and most vibration-sensitive freight scenarios.

Integration and Compatibility

The GL42UEX-80110B-MM-SP is part of the Vertiv rack enclosure lineup, designed to accept standard EIA 310-compliant 19-inch rack equipment. The 42U rail space is compatible with virtually all rack-mount hardware following 1U/2U/4U standard form factors. For teams managing a mixed fleet of security and IT hardware — NVRs, access control servers, PoE switch stacks — this enclosure provides the common physical chassis for co-locating and transporting that equipment as a single integrated stack.

When planning a deployment involving pre-staged racks, consider pairing this enclosure with structured cabling components and rack power distribution units that can be fully installed and dressed before the unit ships. The 1100mm depth and 800mm width are specifically sized to leave working room for cable management accessories installed on the rear and side panels.

For integrators managing warehouse-to-site or staging-facility-to-data-center workflows, this enclosure fits the logistics model where equipment is built, tested, and verified at the staging location before freight — a workflow that reduces on-site installation time and minimizes the risk of configuration errors introduced in the field.

Frequently Asked Questions

Q: What rack unit capacity does the GL42UEX-80110B-MM-SP provide?

A: The enclosure provides 42U of rack space, accommodating a full-height build of standard 19-inch EIA 310-compliant rack-mount equipment without requiring equipment removal before transport.

Q: What are the external dimensions of the GL42UEX-80110B-MM-SP?

A: The enclosure is 42U tall with an 800mm width and 1100mm depth. These dimensions accommodate wider server chassis and deep rear-mounted accessories such as PDUs and cable management arms.

Q: What does the shock pallet form factor mean in practice?

A: The shock pallet integrates the pallet base and the rack enclosure into a single structure engineered to absorb transport vibration and impact. This is distinct from placing a standard rack on a separate shipping pallet — the integrated design reduces the risk of shifting or tipping during freight and intermodal transport.

Q: Can this enclosure remain in service at the final installation site after transport?

A: The GL42UEX-80110B-MM-SP is described as a rack enclosure built for secure, high-density deployment — meaning it is suitable for both transport and ongoing installation use, not a single-use shipping crate.

Q: Is the GL42UEX-80110B-MM-SP suitable for pre-staged security rack deployments?

A: Yes. The 42U height, 800mm width, and 1100mm depth provide sufficient space to fully populate and cable a security stack — NVRs, PoE switches, patch panels, and UPS — before freight, supporting a build-test-ship workflow that reduces on-site installation time.