Vertiv GL42UEX-75160B-MM-SP 42U Rack Shock Pallet
Overview
The Vertiv GL42UEX-75160B-MM-SP is a purpose-built shock pallet designed to protect a 42U, 750mm wide by 1600mm deep rack enclosure during transport and relocation. If you're shipping a fully populated or partially loaded rack — whether across a campus or across the country — vibration and impact during transit are the primary failure modes for rack-mounted equipment. A shock pallet addresses this by providing a mechanically stable, shock-absorbing base that keeps the enclosure and its contents isolated from the bumps, drops, and vibration that occur during freight handling.
This unit is dimensioned specifically for the Vertiv 750 x 1600mm rack footprint and is finished in black to match the enclosure family. Rather than improvising a solution at the loading dock with pallet wrap and foam, the GL42UEX-75160B-MM-SP (often searched as GL42UEX 75160B MM SP) is a manufacturer-matched accessory sized and engineered for the specific cabinet dimensions — which matters both for fit and for maintaining any transport-related warranty conditions on the rack itself.
Key Features
- 42U height compatibility: Matched to the full 42U rack form factor — the most common data-center and server-room chassis height. A shock pallet sized for a shorter rack won't provide the correct footprint coverage or mechanical interface for a 42U unit, making correct sizing non-negotiable.
- 750mm width footprint: The 750mm rack width is standard in high-density data center and infrastructure deployments where cable management, airflow baffles, or side panels add to the 600mm base frame. The pallet base matches this width exactly, preventing overhang or instability during forklift handling.
- 1600mm depth coverage: Deep-format 1600mm racks are common in high-density compute and power distribution installations. The extended depth of this pallet ensures the full rack footprint is supported — no cantilevering at the front or rear during lift operations.
- Black finish: Matched to the black Vertiv enclosure family. Consistent with GL42UEX-series cabinet aesthetics, which matters when racks are photographed for handoff documentation or installed in client-visible data center spaces.
- Shock-isolating pallet design: The shock pallet form factor provides mechanical isolation between the rack base and the transport surface, reducing the transmission of vibration and impact forces into the rack frame and mounted equipment — the primary risk during ground freight and forklift operations.
- Manufacturer-matched accessory: Specified and dimensioned by Vertiv for their rack enclosure lineup. Using a correctly matched pallet preserves the mechanical integrity of the rack base and eliminates improvised solutions that can shift during transit.
Integration and Compatibility
The GL42UEX-75160B-MM-SP is designed for use with Vertiv 42U rack enclosures in the 750mm wide by 1600mm deep configuration. Verify your specific rack model dimensions before ordering — Vertiv produces 600mm and 750mm wide variants as well as 1000mm, 1100mm, and 1200mm depth options, and pallet fitment is not interchangeable across footprints. If you are sourcing this as part of a broader Vertiv infrastructure deployment — including cabinets, power distribution, or thermal management — confirm the enclosure SKU's physical dimensions against this pallet's 750 x 1600mm specification.
For organizations standardizing on a server rack and cabinet platform across multiple sites, the shock pallet is typically ordered alongside the enclosure and held at the shipping origin for use at time of dispatch. It is not a permanent installation component — it is a logistics tool that should be planned into the procurement and deployment workflow, not sourced ad hoc at move time.
Data center project managers coordinating a rack relocation or new site build-out should also review infrastructure planning resources covering cable management, power distribution, and airflow to ensure the full deployment package is specified correctly before freight is dispatched.
Frequently Asked Questions
Q: What rack dimensions does the GL42UEX-75160B-MM-SP shock pallet fit?
A: The GL42UEX-75160B-MM-SP is sized for a 42U rack enclosure with a 750mm width and 1600mm depth footprint. It is not cross-compatible with 600mm wide or shallower-depth rack variants.
Q: Is the shock pallet reusable, or is it a single-use shipping component?
A: The source evidence does not specify reuse rating. Contact the manufacturer or a pre-sales specialist for clarification on whether the GL42UEX-75160B-MM-SP is rated for multiple transport cycles.
Q: Does this pallet ship with the rack, or is it ordered separately?
A: The GL42UEX-75160B-MM-SP is a separate line-item accessory. It must be ordered independently from the rack enclosure itself and coordinated with the enclosure at the point of dispatch.
Q: Is the GL42UEX-75160B-MM-SP compatible with standard forklift handling?
A: As a shock pallet, it is designed to interface with standard pallet-handling equipment. Specific forklift pocket dimensions or rated load capacity are not available in the current evidence — verify with Vertiv product documentation for weight limits and handling specifications.
Q: Can the GL42UEX-75160B-MM-SP be used for long-distance freight shipping, or only local moves?
A: The shock pallet is designed to protect rack enclosures during transport and is applicable to both local relocations and long-haul freight. The degree of protection for a specific freight scenario depends on how the rack is loaded and secured — the pallet addresses floor-level shock and vibration isolation.
The GL42UEX-75160B-MM-SP is the detail that gets overlooked in rack procurement and causes problems at move time. The 750mm wide by 1600mm deep footprint spec is load-bearing here — a shock pallet that doesn't match your cabinet's base dimensions will shift under forklift handling, which defeats the entire purpose and can introduce lateral stress on the rack frame during transit.
Technical Highlights:
- 42U / 750mm / 1600mm dimensional match: This is not a universal pallet — it is engineered to the specific Vertiv 750 x 1600mm enclosure footprint. That precision fit is what provides proper mechanical coupling between the rack base and the pallet surface.
- Shock isolation function: The pallet's job is to absorb and attenuate vibration and impact energy before it reaches the rack frame. Without it, freight-handling forces transmit directly into mounted rails, cable managers, and installed equipment.
- Black finish / enclosure match: Minor point operationally, but relevant for client-site installations where the rack assembly is photographed or inspected before handoff — the matched finish keeps the documentation clean.
Deployment Considerations:
- Order this alongside the enclosure at project initiation, not after the rack is built out. Retrofitting a shock pallet under a fully populated 42U rack on-site is not a realistic option — it needs to be in place before the rack is loaded or at the shipping origin.
- The evidence does not specify a rated load capacity for this pallet. Before shipping a fully populated high-density compute rack, verify the maximum weight rating with Vertiv's product documentation to ensure the pallet is appropriate for your loaded cabinet weight.
The GL42UEX-75160B-MM-SP is the right call for any project where a populated 750 x 1600mm Vertiv rack is being shipped to a co-location facility, a branch data center, or a client site — anywhere that a freight carrier handles the enclosure and improvised protection isn't acceptable.
