Middle Atlantic EVO FLR BX Surf CVR W FLR Insert - EFB45CTCSN

Middle Atlantic EFB45CTCSN Evolution Series Floor Box Surface Cover with Floor Insert

Overview

The Middle Atlantic EFB45CTCSN is a surface-style floor box cover with integrated floor insert, part of the Evolution Series EFB45 floor box platform from Middle Atlantic's AV and infrastructure line. Finished in satin nickel, it is designed to close out a raised or access floor box installation with a professional, low-profile appearance while providing access to standard receptacles below. If you are spec'ing a clean-looking floor box installation in a boardroom, command center, or open-plan workspace where cable access points need to stay tidy and accessible, this is the cover assembly that finishes the job.

TAA compliance — confirmed for the EFB45CTCSN — matters for federal, state, and municipal projects subject to the Trade Agreements Act. Specifying a non-compliant cover on a TAA-required job is the kind of detail that holds up procurement, so it is worth noting upfront.

Key Features

• Surface Cover Style: The surface mount profile means the cover sits flush with or slightly proud of the floor surface rather than recessing below it — the correct choice when the floor box opening and surrounding material do not accommodate a fully recessed trim ring. If your finished floor is tile, raised access panel, or poured concrete, surface style installs cleanly without requiring additional cutout depth.
• Satin Nickel Finish: Satin nickel is a neutral, low-glare metallic finish that reads professional in both contemporary and traditional interior environments. It holds up better to daily foot traffic scuffing than polished chrome and does not show fingerprints as aggressively — a practical consideration in high-use conference or operations spaces.
• Standard Receptacle Type: The standard receptacle configuration means this cover is designed around conventional duplex or single receptacle modules — not Decora, not keystone. Confirm your EFB45 base unit is also equipped for standard-style devices before ordering; mixing receptacle profiles between box and cover will require adapter plates or a different cover SKU.
• TAA Compliant: Federal and publicly funded projects that require TAA-compliant components can specify the EFB45CTCSN without exception paperwork. This is a stated, verifiable attribute — not an assumed one — which matters when procurement teams audit compliance documentation at project closeout.
• Integrated Floor Insert: The floor insert ships as part of this assembly, so you are not sourcing the cover and insert separately. This reduces the risk of mismatched components and simplifies the bill of materials for larger deployments with multiple floor box locations.

Integration and Compatibility

The EFB45CTCSN is designed for the Evolution Series EFB45 floor box platform. When spec'ing this cover, verify the base floor box model matches — the EFB45 series is the correct host unit. This cover should not be assumed compatible with other Middle Atlantic floor box families without confirming the dimensional and receptacle interface. If you are building out a larger infrastructure project and need to pair floor boxes with overhead cable management or rack systems, Middle Atlantic's broader AV infrastructure catalog covers those complements. For projects requiring rack and cable management planning, coordinating floor box cover finish with adjacent rack trim is a detail worth addressing in the design phase.

Frequently Asked Questions

Q: Is the EFB45CTCSN TAA compliant?

A: Yes. TAA compliance is a confirmed, stated specification for the EFB45CTCSN, making it suitable for federal and publicly funded projects subject to Trade Agreements Act requirements.

Q: What finish does the EFB45CTCSN come in?

A: The EFB45CTCSN is finished in satin nickel — a neutral, low-glare metallic finish well-suited to professional interior environments including boardrooms, command centers, and open-plan offices.

Q: What receptacle type does the EFB45CTCSN support?

A: The EFB45CTCSN is configured for a standard receptacle type. It is not designed for Decora or keystone-style modules. Confirm your EFB45 base box is equipped for standard receptacles before ordering.

Q: What is the cover style on the EFB45CTCSN?

A: The EFB45CTCSN uses a surface cover style, meaning the cover plate sits at or just above the finished floor surface. This is appropriate for installations where additional recess depth is not available in the floor material.

Q: Does the EFB45CTCSN include the floor insert?

A: Yes. Based on the product name and series designation, the floor insert is included as part of this assembly, allowing the cover and insert to be sourced and installed as a matched unit.

Eden Phillips

The EFB45CTCSN is the finish component that determines whether a floor box installation looks like a professional infrastructure job or an afterthought. That satin nickel surface cover is not decorative spec padding — in a raised-floor command center or a conference room where the floor box gets opened and closed multiple times a day, finish durability and receptacle compatibility are the two specs that generate callbacks when they are wrong.

Technical Highlights:

• TAA Compliance: Verified for this SKU — not assumed from the product family. On federal or state-funded AV/security integration projects, a single non-compliant component can flag the entire BOM at procurement review. The EFB45CTCSN clears that gate.
• Surface Cover Style: Surface mount is the right call when the finish floor material — tile, raised access panel, polished concrete — does not provide the recess depth a flush-mount trim requires. Specifying the wrong cover style means a return and a re-pull on a completed floor installation.
• Standard Receptacle Interface: The standard receptacle type locks this cover to a specific module class. If the base EFB45 box was ordered with Decora-style modules, this cover will not mate correctly. Verify the base unit receptacle configuration before the cover ships to site.

Deployment Considerations:

• Coordinate finish selection with adjacent infrastructure early — satin nickel reads correctly against most commercial floor box surround materials, but if the project spec calls for a different trim finish family, resolve that before the floor work is complete and the box is set.
• The evidence confirms TAA compliance and receptacle/cover style, but does not specify IP or ingress ratings — this cover is appropriate for interior, conditioned-space installations, not wet or outdoor floor applications.

The EFB45CTCSN is the right specification for TAA-required interior deployments — federal operations centers, government conference rooms, secure facility AV infrastructure — where finish quality, receptacle compatibility, and procurement compliance all need to land on the same line item.