Pelco EABE1-2X40VF36-SPT0-M2 Bispectral 2MP 40x Zoom PTZ Camera

Overview

The Pelco EABE1-2X40VF36-SPT0-M2 is a bispectral PTZ camera pairing a 2MP visible-light imager with a 36mm fixed thermal lens on a single 360-degree pan-tilt-zoom head. This Esprit Enhanced series unit is built for sites where you need to detect a subject in total darkness or through smoke and haze with the thermal channel, then confirm identity by slewing the 40x optical zoom visible sensor onto the same point. Running on 220-230VAC, the EABE1-2X40VF36-SPT0-M2 is suited for perimeter posts, ports, substations, and industrial yards where power infrastructure already runs mains AC rather than PoE. If your evaluation criteria include long-range detection plus verification in one head instead of two separate camera runs, this model addresses that directly.

Key Features

• Bispectral sensor pairing: combining a 2MP visible imager with a thermal channel means you get detection (thermal doesn't care about ambient light) and verification (2MP color detail) from a single mounting point and a single set of cable runs — fewer poles, fewer network drops for the same coverage area.
• 40x optical zoom: lets an operator start on a wide security perimeter view and drive in on a vehicle plate or person at range without losing resolution the way digital zoom does. This is the spec that matters most for long approach roads, dock aprons, and open-yard perimeters.
• 36mm fixed thermal lens: a fixed focal length on the thermal channel means no autofocus hunting on low-contrast heat signatures — the thermal image is consistently framed for its designed detection range, which simplifies tuning analytics rules against a stable field of view.
• Full PTZ mechanism: continuous pan-tilt-zoom control puts the EABE1-2X40VF36-SPT0-M2 in an active-monitoring role rather than a fixed-view role — one operator or one auto-tour preset list can cover a much wider physical area than a fixed camera, cutting the total camera count needed for a large perimeter.
• 220-230VAC input: matches mains power already run to pole-mounted or building-mounted PTZ positions on industrial and utility sites, so you're not retrofitting PoE+ switch capacity or running a separate low-voltage supply to a high-draw PTZ motor and thermal core.

Integration & Compatibility

The EABE1-2X40VF36-SPT0-M2 (often searched as EABE1 2X40VF36 SPT0 M2) is part of the Pelco Esprit Enhanced bispectral PTZ line, positioned for integrators building out long-range perimeter detection where thermal and visible verification need to live on the same pan-tilt platform. Confirm VMS-side thermal stream handling and radiometric or analytics licensing needs with your video management platform before finalizing a bill of materials, since bispectral units typically expose the visible and thermal channels as separate streams. When planning the broader deployment, pair this unit with adequate network video recorders storage and review a camera selection guide to confirm coverage distance assumptions against your specific mounting height and approach angle before ordering.

Browse the full Pelco camera catalog for fixed-lens and other bispectral variants if your site calls for a different zoom range or a shorter thermal focal length, and check PTZ cameras for wide-area coverage alternatives if 40x zoom exceeds what your site geometry requires. For AC-powered PTZ runs, also review PoE planning guidance if any portion of your site mixes AC-fed PTZ heads with PoE-fed fixed cameras, so your network and power budgets are planned together rather than in isolation.

Frequently Asked Questions

Q: What does bispectral mean on the EABE1-2X40VF36-SPT0-M2?

A: It means the camera head carries two imaging channels — a 2MP visible-light sensor and a thermal sensor behind a 36mm fixed lens — so you get both heat-based detection and visible-light verification from one PTZ unit.

Q: What is the optical zoom range on this model?

A: The visible channel provides 40x optical zoom, letting operators move from a wide perimeter view to a close-in view of a subject or vehicle without loss of resolution.

Q: What power does the EABE1-2X40VF36-SPT0-M2 require?

A: It runs on 220-230VAC mains power, which fits sites where AC is already run to the pole or building mount rather than relying on PoE.

Q: Is the thermal lens on this camera interchangeable?

A: No — the thermal channel uses a fixed 36mm focal length, so the thermal detection range is set at manufacture rather than field-adjustable.

Q: Does this camera pan and tilt, or is it fixed-position?

A: It is a full PTZ (pan-tilt-zoom) camera, not a fixed-position unit, so it supports active operator control and preset touring across a wide coverage area.

Eden Phillips

The spec that gets my attention on the Pelco EABE1-2X40VF36-SPT0-M2 is the 40x optical zoom paired with a fixed 36mm thermal lens on the same PTZ head — that's a detect-then-verify workflow built into one camera instead of a two-camera solution most sites cobble together.

Technical Highlights:

• 2MP visible sensor + thermal channel: gives you usable identification-grade color detail once you've zoomed in, after the thermal channel has already flagged a heat signature the visible sensor alone would have missed at night.
• 40x optical zoom: real optical range, not digital upscaling, so detail holds up at distance on approach roads and open yards — the main reason to spec a PTZ over a fixed multi-camera array in the first place.
• 220-230VAC input: tells you this is designed for mains-fed pole or building infrastructure, not a PoE run — plan your electrical drop accordingly rather than assuming a standard switch port will power it.

Deployment Considerations:

• Because the thermal lens is fixed at 36mm, confirm your expected detection distance against that focal length before ordering — there's no field swap if the range doesn't match your perimeter depth.
• 220-230VAC means you need to coordinate electrical infrastructure at the mount point ahead of installation day; this isn't a drop-in PoE replacement for an existing low-voltage camera position.

I'd point the EABE1-2X40VF36-SPT0-M2 at a mains-powered perimeter post on a port, substation, or industrial yard where you need long-range thermal detection and 40x optical verification from a single PTZ head rather than running separate fixed thermal and visible cameras to the same pole.