BCD International BCD-RGD-804P Environmentally Hardened 8-Port PoE+ Managed Switch

The BCD-RGD-804P is an environmentally hardened managed switch built for camera and access-control drops that live outside a climate-controlled rack room — roadside cabinets, outdoor enclosures, rail cars, and unconditioned mechanical rooms. It packs 8 PoE+ ports at 10/100/1000M plus 4 dedicated 1000M SFP uplinks into a DIN-rail housing rated for a -40 to 85°C operating range, so it belongs on the short list any time the install site can't guarantee HVAC. This is a switch, not a camera or recorder — evaluate it on port budget, PoE wattage, and thermal tolerance rather than resolution or imaging specs.

Overview

Eight 10/100/1000M electrical ports deliver PoE+ (End Span) at up to 30W per port, enough headroom for PTZ domes, heated housings, or multi-radio access points — not just fixed low-draw cameras. Four independent 1000M SFP slots handle fiber uplinks back to a head-end switch or NVR closet, letting you run gigabit distances well past copper's 100m ceiling without eating into the 8 PoE ports. A 24Gbps switching fabric and 7us store-and-forward latency keep the math simple: with 8x1Gbps PoE ports plus 4x1Gbps SFP uplinks, the backplane isn't the bottleneck even at full load.

Key Features

• 8 PoE+ Ports, 30W Per Port: 30W per port covers PTZ cameras and heated/blower enclosures that a standard 15.4W PoE port can't run — check your camera's power draw against this ceiling before assuming a single-switch drop.
• 4x 1000M SFP Uplinks: Four separate SFP slots mean uplink redundancy or fiber-run distance without touching the 8 PoE ports doing camera work — useful when the head-end closet is a fiber run away from the field cabinet.
• -40°C to 85°C Operating Range: This is the headline spec — it's rated for direct sun on a metal roadside cabinet in summer and unheated exposure in winter without a climate-controlled enclosure, which is where a commercial-indoor switch would shut down or drift out of spec.
• IP40 Enclosure: IP40 blocks finger/tool contact and larger debris but is not a wash-down or driving-rain rating — plan on mounting the BCD-RGD-804P inside a sealed cabinet or NEMA enclosure, not exposed to weather directly.
• 24Gbps Switching Bandwidth / 7us Latency: With 12 total gigabit-class ports (8 copper + 4 SFP) the theoretical max is under 24Gbps, so the fabric runs non-blocking even with every port saturated — no oversubscription tax on a fully loaded drop.
• 8192-Entry MAC Table: Sized well past a 12-port switch's own device count, so it won't choke on downstream devices behind a media converter or a secondary unmanaged switch hanging off one port.
• 4096 VLANs / 1024 IGMP Groups: Enough VLAN headroom to segment camera traffic from access-control and general IT traffic on the same physical switch, and IGMP snooping capacity that keeps multicast video streams from flooding every port on the segment.
• DIN-Rail Mounting: Matches industrial control-cabinet hardware directly — no separate rack shelf or bracket needed when this switch is going into the same enclosure as PLCs, UPS gear, or gate controllers.
• USB Console Port (115200-8-N-1): Standard USB-serial console access for initial configuration or field troubleshooting without needing a legacy DB9 adapter in the truck.
• Alarm Output Relay (1A@30VDC): A dry-contact relay output that can trigger an external alarm panel or beacon on a fault condition — useful when this switch is the only monitored device in an unmanned cabinet.
• 10W Power Consumption (No PoE): Low baseline draw on DC45~57V input keeps the switch itself light on the DC power budget in solar or battery-backed remote sites, leaving more of the supply for the PoE loads.
• Compact Footprint (68 x 102.5 x 146mm, 0.8kg): Small enough to share cabinet space with a UPS, media converters, and terminal blocks without forcing a larger enclosure just for the network gear.

Integration & Compatibility

The BCD-RGD-804P is a managed switch, so it fits into existing network monitoring and VLAN architecture rather than requiring a proprietary controller. Pair it with network video recorders at the head end and route camera VLANs through the 4 SFP uplinks for a clean field-to-closet fiber path. For sites planning multiple hardened cabinets, review a PoE planning guide before finalizing port allocation — 30W-per-port budgeting changes fast once PTZs and heated housings enter the mix. Browse the full network switches lineup or the broader BCD International catalog for companion hardware, and check options if your site doesn't already have a rated cabinet — remember, IP40 on this unit means it still needs one.

Frequently Asked Questions

Q: What temperature range does the BCD-RGD-804P handle?

A: It's rated for -40°C to 85°C operating temperature and the same -40°C to 85°C for storage, with 5% to 95% non-condensing humidity — built for unconditioned cabinets and extreme climates.

Q: How much PoE power does each port on the BCD-RGD-804P deliver?

A: Each of the 8 PoE+ ports delivers up to 30W using End Span PoE, enough for PTZ cameras and heated or blower-equipped enclosures.

Q: Can the BCD-RGD-804P be mounted in a control cabinet?

A: Yes — it's designed for DIN-rail mounting, matching standard industrial control-cabinet hardware.

Q: Is the BCD-RGD-804P weatherproof for outdoor exposure?

A: The enclosure is rated IP40, which protects against tool/finger contact and larger debris but not water or dust ingress — it should be installed inside a sealed outdoor cabinet or enclosure, not exposed directly to weather.

Q: How many fiber uplinks does the BCD-RGD-804P support?

A: Four dedicated 1000M SFP ports are available for fiber uplinks, separate from the 8 copper PoE+ ports.

Q: What's the switching capacity of the BCD-RGD-804P?

A: It has a 24Gbps switching bandwidth with 7us store-and-forward latency and an 8192-entry MAC address table.

Marty Allison

I get asked a lot whether a standard commercial switch can just go into an outdoor cabinet with a heater strip. The BCD-RGD-804P (often searched as BCD RGD 804P) is the answer for when the site can't guarantee climate control at all — it's rated to run from -40°C to 85°C without any supplemental conditioning, which is well outside what a typical 0-50°C rack switch tolerates.

Technical Highlights:

• 30W PoE+ per port across 8 ports: That's enough to run PTZ cameras with heaters or blower-equipped enclosures, not just fixed-lens cameras sipping 6-8W — check total PoE budget against your camera lineup before assuming full 8-port headroom.
• 4x dedicated SFP uplinks: Keeps fiber backhaul completely separate from the 8 copper PoE ports, so you're not sacrificing a camera drop to get a fiber run back to the head end.
• 24Gbps switching fabric, 7us latency: With 12 gigabit-class ports total, the switch stays non-blocking even at full load — no throughput penalty for running every port at once.

Deployment Considerations:

• IP40 is not an outdoor rating on its own — this switch still needs to sit inside a sealed NEMA or IP-rated cabinet even though the electronics themselves tolerate the temperature swing.
• DC45~57V input means you're planning a DC power supply or DC UPS for this switch, not standard AC — factor that into the cabinet's power design early.

This is the switch I'd spec for a roadside traffic-camera cabinet or an unmanned rail-yard enclosure where summer metal-box heat and winter cold snaps both happen on the same unit, and where DIN-rail mounting next to a PLC or gate controller is already the norm.