ENET Solutions STLC-50-15M-ENC Multimode Fiber Patch Cable

Overview

The ENET Solutions STLC-50-15M-ENC is a 15-meter duplex multimode fiber optic patch cable designed to reliably connect network devices. It features an ST connector on one end and an LC connector on the other, facilitating connections between equipment with different port types. This cable is constructed with 50/125 micron OM2 or better fiber, ensuring sufficient bandwidth for data transmission in surveillance and enterprise network deployments. The orange jacket clearly identifies it as a multimode cable, preventing accidental misconnections with single-mode fiber.

Compatibility

This patch cable is compatible with any network equipment featuring standard ST and LC fiber optic ports. It is suitable for connecting network switches, media converters, NVRs, and cameras that utilize these connector types. Specifically, it can be used with devices requiring OM2 multimode fiber specifications for optimal performance, such as certain IP camera backbones or fiber-to-Ethernet media converters.

Installation Notes

When installing, ensure the ST and LC connectors are clean before insertion to prevent signal degradation or damage. Avoid sharp bends in the cable; maintain a bend radius of at least 1 inch (25mm) to prevent signal loss or fiber breakage. The 15-meter length provides flexibility for routing within racks or across moderate distances between equipment cabinets.