ELO Touch E239980 Power Converter 24VDC to 12VDC
Overview
The ELO Touch E239980 is a 24VDC to 12VDC power converter designed to step down voltage for surveillance cameras, displays, and access control equipment that require 12VDC operation. This converter solves the integration problem when your primary power distribution runs 24VDC but downstream devices need 12VDC — common in mixed-legacy and multi-tier installations where you've standardized on higher-voltage trunk lines to reduce resistive loss over longer cable runs, but individual endpoints expect lower nominal voltage.
Compatibility
The E239980 is compatible with ELO Touch surveillance systems and third-party 12VDC-input devices across camera, display, and control interfaces. Confirm input requirement on your target device before installation — nameplate voltage spec on the device or in its datasheet must show 12VDC operation. Suitable for retrofit scenarios where existing infrastructure delivers 24VDC and you need to power legacy 12VDC cameras or auxiliary equipment without replacing the upstream supply.
Installation Notes
Wire the converter's input terminals to your 24VDC source and output terminals to the 12VDC load. Ensure the load's current demand does not exceed the converter's rated output capacity — verify maximum draw in amps on the converter's nameplate. Mount in a dry, accessible location away from moisture and direct sunlight. Confirm polarity before energizing: 24VDC input and 12VDC output terminals must be correctly identified to avoid equipment damage. Use appropriately gauged cabling for the distance and current draw to minimize voltage drop.
