APC by Schneider Electric ACECFR20200SE4 EcoBreeze 20ft Data Center Cooling Frame
Overview
The APC by Schneider Electric ACECFR20200SE4 is a 20-foot (6-meter) EcoBreeze frame assembly designed for large-scale data center cooling infrastructure. This factory-configured unit ships with four cooling modules pre-installed and wired for 480/3/60 VAC three-phase power — the electrical standard for North American commercial and industrial data center environments. At 17,020 lb, this is a structural-grade deployment, not a bolt-on upgrade; commissioning requires coordinated civil, electrical, and mechanical planning well before the unit arrives on site.
The EcoBreeze product line from APC by Schneider Electric addresses free-cooling and indirect evaporative cooling applications where operators want to reduce mechanical refrigeration hours and lower PUE. The 20-foot frame format suits high-density row or perimeter deployments in enterprise data halls where cooling capacity needs to scale alongside compute density. The four-module pre-installation means reduced on-site assembly time compared to field-built configurations — modules arrive tested and seated in the frame, eliminating one source of commissioning error.
Key Features
- 480/3/60 VAC Three-Phase Input: Matches the standard electrical distribution in North American commercial data centers, so no step-down transformer is required — plug directly into existing 480V switchgear feeds and avoid the efficiency loss and cost of voltage conversion.
- 4 Modules Pre-Installed: Factory-installed modules reduce on-site labor and integration risk; commissioning crews can focus on electrical termination and controls integration rather than module assembly and alignment.
- 20-Foot (6-Meter) Frame: The extended frame length supports high-aggregate cooling capacity across the module array — appropriate for large data hall rows or perimeter cooling walls where a compact unit would require multiple independent installations and separate controls touchpoints.
- Data Center Application Rating: Designed specifically for the thermal, humidity, and operational demands of data center environments — not a general HVAC unit adapted for IT use, which matters when sizing redundancy and evaluating manufacturer support scope.
- Commercial-Grade Construction: At over 17,000 lb installed, the structural specification targets permanent, engineered deployments. Factor structural floor loading into your data hall design review before specifying this unit.
Integration and Compatibility
The ACECFR20200SE4 operates on 480/3/60 VAC, which aligns with standard North American data center electrical infrastructure. Buyers should confirm module type compatibility, controls integration (BMS or EcoStruxure), and mechanical interconnect requirements with APC's engineering team prior to procurement — at this price and scale, pre-sales engineering review is standard practice, not optional. Consult your power and cooling infrastructure plan for load-balancing and redundancy requirements before finalizing the frame count.
Frequently Asked Questions
Q: What electrical supply does the ACECFR20200SE4 require?
A: The ACECFR20200SE4 requires 480/3/60 VAC — three-phase, 480-volt, 60 Hz power, which is standard North American commercial data center distribution. Confirm exact amperage draw and breaker sizing with APC engineering for your specific module configuration.
Q: How many cooling modules come pre-installed on the ACECFR20200SE4?
A: The ACECFR20200SE4 ships with 4 cooling modules already installed in the 20-foot frame, reducing on-site assembly labor compared to field-built configurations.
Q: What is the warranty on the ACECFR20200SE4?
A: The ACECFR20200SE4 carries a 1-year manufacturer warranty. Contact APC by Schneider Electric directly to confirm any available extended service agreements for this frame size.
Q: How heavy is the ACECFR20200SE4 and what are the floor-loading implications?
A: The ACECFR20200SE4 weighs approximately 17,020 lb (7,720 kg). This is a permanent, engineered installation — floor loading, structural support, and rigging must be evaluated by a licensed structural engineer prior to siting and commissioning.
Q: Is the ACECFR20200SE4 appropriate for smaller server rooms?
A: No. The 20-foot frame length, 17,000+ lb weight, and three-phase 480V power requirement position this as an enterprise data hall unit. Smaller deployments should evaluate APC's modular CRAC or InRow cooling line instead.
The ACECFR20200SE4 is one of the larger frame assemblies in APC's EcoBreeze line — a 20-foot, 17,020-lb structure that ships with four cooling modules pre-seated and ready for electrical commissioning at 480/3/60 VAC. If you're evaluating this unit, you're planning a serious data hall build, not a server room refresh.
Technical Highlights:
- 480/3/60 VAC Three-Phase Power: Matches North American data center switchgear directly — no voltage step-down, no transformer losses, clean integration into existing 480V distribution panels.
- 4 Modules Factory-Installed: Pre-installed modules mean the frame arrives as a tested assembly, not a kit — fewer variables during commissioning, less risk of misalignment or incorrect seating that field assembly can introduce at scale.
- 20ft (6m) Frame Format: The extended frame supports higher aggregate cooling capacity than compact units and consolidates controls into fewer touchpoints — relevant when managing a large data hall with BMS integration.
Deployment Considerations:
- At 17,020 lb, rigging and structural floor load analysis are non-negotiable pre-commissioning steps — budget for structural engineering review and heavy rigging in your project plan before the unit ships.
- Detailed specs including airflow capacity (CFM), cooling output (kW), and controls integration (EcoStruxure/BMS compatibility) are not published in available evidence — engage APC's pre-sales engineering team directly to obtain full technical documentation before finalizing the specification.
The ACECFR20200SE4 is sized for enterprise data halls undergoing large-scale build-out or capacity expansion — particularly where operators are targeting free-cooling hours and want a pre-configured, factory-tested frame rather than a field-assembled system.
