Vertiv GL720E-2436-W-1032P 37U 24" x 36" White Rack Enclosure with Plexi Front Door
Overview
The Vertiv GL720E-2436-W-1032P is a 37U, 24-inch-wide by 36-inch-deep rack enclosure finished in Winter White — a practical choice for data closets, operations centers, and healthcare IT rooms where aesthetics matter alongside functionality. This specific configuration pairs a clear plexi front door with a perforated-vented solid rear door, giving you visibility into installed equipment without sacrificing rear airflow management. If you're speccing a rack for a space where aesthetics or departmental standards call for white enclosures rather than the default black, the GL720E-2436-W-1032P hits that mark while delivering the structural and mounting options you'd expect from the Vertiv Genesis line.
Browse the full Vertiv rack and infrastructure catalog for complementary enclosures, PDUs, and thermal management products.
Key Features
- 37U Usable Height: 37U gives you room to mount a meaningful mix of 1U and 2U gear — servers, patch panels, KVM switches, UPS units — without stacking compromise. The GL720E series also ships in 44U, 31U, 24U, and 13U heights, so if you need to match an existing row or fit a low-ceiling wiring closet, there's a direct family equivalent rather than a workaround.
- 24-Inch Width: The 24" footprint fits standard 19-inch EIA equipment with side clearance, and works in tighter floor plans where a 29" wide frame would block an aisle or doorway. Vertiv also offers this model in 29" width for environments where wider side rails are needed for cable routing or specialized mounting.
- 36-Inch Depth: 36" accommodates mid-depth server and storage gear comfortably — deep enough for most 1U rack servers and 2U switches with cable management, but not oversized for the footprint. The 32" depth variant is available in the same family if your floor space is tighter or you're running exclusively network-layer equipment.
- Winter White Finish: The powder-coat Winter White finish is the deciding factor for operations control rooms, healthcare environments, and open-office IT closets where an all-black rack looks out of place. Both color options (Black and Winter White) span the full GL720E product matrix, so color isn't a trade-off against any other spec.
- Plexi Front / Solid Perforated Rear Door Configuration: The clear plexi front door lets technicians and operators visually confirm indicator lights, port activity, and labeling without opening the enclosure — useful in glass-walled server rooms and ticketed NOC environments. The solid perforated rear door handles rear cable exit and airflow without the visual clutter of an open-back rack. If you need a mesh front for aggressive front-to-rear airflow (high-density compute), look at the Mesh Front/Rear door variant in this same family.
- #10-32 and 3/8" Square (M6) Mounting Options: Dual mounting hole compatibility means you're not locked into a single rail standard. #10-32 is common on older network and AV gear; M6 (3/8" square) is standard on modern server and storage equipment. Both are supported, so a mixed-vintage equipment environment doesn't require rail adapters or workarounds.
- Clear Rack Rail Designation: Rails are marked clearly, reducing mis-mount risk during high-density installs where technicians are populating multiple racks under time pressure. Simple detail, but it matters when you're commissioning twelve racks on a compressed schedule.
Integration and Compatibility
The GL720E-2436-W-1032P is designed to mount standard 19-inch EIA rackmount equipment using #10-32 or M6 (3/8" square) hardware — covering the vast majority of commercial rack gear from network switches and patch panels to 1U and 2U servers. The 36-inch depth accommodates most mid-depth rackmount devices; verify your deepest equipment's rail-to-rear-port clearance before ordering if you're running full-depth servers near 30". This enclosure pairs well with Vertiv Geist rack PDUs for power distribution and integrates into row-based layouts alongside Vertiv's thermal management accessories. For structured cabling environments, the 37U height leaves adequate units for both active switching and passive patch panel layers when planned correctly. Explore network racks and enclosures to compare form factors if open-frame or two-post alternatives better suit your cabling density.
If your project calls for side-by-side rack alignment in a multi-rack row, confirm the 24" width fits your aisle clearance and baying hardware requirements before finalizing the order. Vertiv's rack accessories — including blanking panels, cable management arms, and mounting rail kits — are sized for the GL720E family footprint.
Frequently Asked Questions
Q: What door configuration does the GL720E-2436-W-1032P ship with?
A: This model ships with a clear plexi front door and a solid perforated rear door. If you need a mesh front for higher-density airflow, the GL720E family offers a Mesh Front/Rear configuration as a separate model.
Q: Does the GL720E-2436-W-1032P support both #10-32 and M6 rack mounting hardware?
A: Yes. The enclosure supports #10-32, 3/8" square, and M6 mounting hole formats, covering the majority of commercial rackmount equipment without requiring adapter rails.
Q: Is the 37U height the only option in the GL720E-2436 line?
A: No. The GL720E family is available in 44U, 37U, 31U, 24U, and 13U heights. Width options include 24" and 29"; depth options include 32" and 36". This specific model (GL720E-2436-W-1032P) is the 37U / 24" wide / 36" deep configuration in Winter White.
Q: What is the color of the GL720E-2436-W-1032P?
A: Winter White powder coat. The same GL720E family is also available in Black if your installation standard requires it.
Q: Can this rack fit in a room with a standard 8-foot ceiling?
A: A 37U rack enclosure typically stands approximately 70–73 inches tall (frame height varies by manufacturer). Verify the actual assembled height from Vertiv's installation documentation against your ceiling and door clearances before delivery, particularly if the rack must pass through a standard 80" doorway.
Q: Is the GL720E-2436-W-1032P suitable for high-density compute environments?
A: The plexi front door limits front-face airflow compared to a mesh-door variant. For high-density compute or blade chassis installs generating significant heat, the mesh front/rear GL720E configuration is a better fit. The plexi-front variant is well-suited for network-layer and AV gear where visual equipment monitoring matters more than aggressive front-to-rear airflow.
The GL720E-2436-W-1032P is a rack I'd spec for operations centers and healthcare IT closets where equipment visibility is a daily workflow requirement, not an afterthought. The clear plexi front door is the differentiating detail here — it lets you do a fast visual sweep of port indicators and status LEDs without breaking the physical security perimeter of the enclosure every time someone walks by. Pair that with the Winter White finish and you've got a rack that doesn't look like it was dragged in from a server room.
Technical Highlights:
- 37U / 24" x 36" Footprint: 37U is a practical middle ground — enough density for a full network stack plus patch panel plus a UPS, without the footprint penalty of a 44U frame in a room where floor space is shared. The 36" depth handles most current-gen 1U switches and servers with room for rear cable dress.
- Dual Rail Standard (#10-32 and M6): Supporting both #10-32 and 3/8" square (M6) means you can mix a legacy Cisco switch, a current HPE server, and a patch panel in the same rack without hunting for adapter rail kits. In mixed-vintage environments this is the difference between a clean install and a workaround.
- Plexi Front / Solid Perforated Rear: The perforated rear keeps rear-exhaust airflow unobstructed while containing cable clutter. The plexi front handles the NOC or healthcare use case where operators want eyes on equipment status without physical access — without committing to a full glass-door variant.
Deployment Considerations:
- The 24" width is tight for wide cable management panels or dual-arm management accessories. If your cabling plan calls for horizontal cable managers wider than 19" plus side routing space, measure your combined external width against aisle clearance before finalizing. The 29" width variant may be a better fit for cabling-heavy network closets.
- The plexi front door restricts front-face airflow, which matters in high-density compute rows. If you're populating this rack with blade systems or dense 1U servers rather than network-layer gear, consider the GL720E mesh-door variant — the plexi door will create a front-face thermal restriction at high wattages.
This is the right enclosure for a distributed enterprise edge deployment — an operations room, a healthcare nurses' station IT closet, or a retail back-office network cabinet — where Winter White aesthetics, equipment visibility through the plexi front, and flexible rail compatibility (GL720E-2436-W-1032P also searched as GL720E 2436 W 1032P) matter as much as raw density. It's not the rack for a high-density compute pod; it is the rack for the network and AV gear that supports one.
