Vertiv 6001E-2432-B-SQM6 31U 24-Inch Deep Server Cabinet
Overview
The Vertiv 6001E-2432-B-SQM6 is a 31U, 24-inch deep open-frame or enclosed server cabinet designed for data center, server room, and network closet deployments where rack space is at a premium and depth management matters. At 31U, it delivers a practical capacity sweet spot — large enough to house a meaningful stack of 1U and 2U appliances, switches, and patch panels, without the footprint penalty of a full 42U tower. The 24-inch interior depth keeps it accessible in tighter equipment rooms and network closets where a standard 32-inch or 48-inch deep cabinet simply won't fit flush against the wall or within a hot/cold aisle constraint.
For security integrators and IT architects building out server racks and cabinets, the 6001E-2432-B-SQM6 (often searched as 6001E 2432 B SQM6) addresses a common edge case: you need more than a 12U or 18U wall mount, but a 42U floor cabinet wastes vertical real estate and strains the floor load budget in older facilities. Thirty-one usable rack units lands you in the right range for a mid-size NVR, a managed PoE switch stack, a patch panel tier, and a UPS — all in one enclosure — without overspending on empty space you'll never fill.
The black finish is a practical call for most deployments — it reduces visible dust accumulation and integrates cleanly into server room aesthetics without requiring a custom color order. Vertiv's Vertiv infrastructure line is well-established in commercial and enterprise data center environments, and this cabinet follows the same build standards used across the broader 6001E family.
Key Features
- 31U Rack Height: Thirty-one usable rack units accommodate a meaningful equipment stack — NVR, PoE switch, patch panel, and UPS — without forcing a 42U footprint. Practical for mid-density deployments in space-constrained server rooms.
- 24-Inch Interior Depth: The 24-inch depth targets shallower equipment rooms, network closets, and wall-adjacent installs where standard 32–48-inch deep cabinets create aisle or clearance problems. Verify your deepest piece of equipment fits with cable clearance before ordering — most 1U switches and 2U NVRs are well under 20 inches, leaving rear cable management room.
- Black Finish: The black cabinet color reduces visual dust contrast in operational environments and is standard for most data center and security rack deployments. If your facility uses a color-coded rack system, verify this matches your convention before specifying.
- Commercial-Grade Vertiv Construction: Vertiv's 6001E series is built to commercial data center standards — relevant when you need a cabinet that will pass a facilities audit or integrate into a managed co-lo or enterprise equipment room without procurement pushback.
Integration & Compatibility
The 31U form factor accepts any standard EIA-310 19-inch rack-mount equipment. For network video recorders, rack-mount NVRs from Axis, Hanwha, Hikvision, and most other major brands are 1U or 2U and fit without modification. PoE switches, patch panels, fiber enclosures, and 1U/2U UPS units all mount on standard 19-inch rails. The 24-inch depth is the primary compatibility constraint — confirm rear cable routing clearance for high-port-count patch panels and KVM drawers, which can run deeper than their front-panel specs suggest.
If your deployment requires a managed PoE switch stack alongside recording and storage equipment, this cabinet provides sufficient U-count to consolidate everything into a single locked enclosure rather than mixing open-frame and enclosed mounting across multiple units. Consult the network and PoE planning guide when sizing your switch and UPS load before finalizing the cabinet spec.
Frequently Asked Questions
Q: What is the usable rack unit capacity of the Vertiv 6001E-2432-B-SQM6?
A: The 6001E-2432-B-SQM6 provides 31U of usable rack space, suitable for housing NVRs, managed switches, patch panels, and UPS units in a single enclosure.
Q: What is the interior depth of the 6001E-2432-B-SQM6?
A: The interior depth is 24 inches. This is shallower than standard 32-inch or 48-inch deep cabinets, making it appropriate for network closets and server rooms with limited floor depth or wall-clearance constraints.
Q: What color is the Vertiv 6001E-2432-B-SQM6?
A: The cabinet ships in black, which is standard for most commercial server room and data center environments.
Q: What equipment mounts in the 6001E-2432-B-SQM6?
A: Any standard 19-inch EIA-310 rack-mount equipment fits, including 1U and 2U NVRs, managed PoE switches, patch panels, fiber enclosures, and rack-mount UPS units. Confirm the depth of your deepest device against the 24-inch interior before ordering.
Q: Is the 6001E-2432-B-SQM6 appropriate for a network closet installation?
A: Yes — the 31U height and 24-inch depth are specifically well-suited for network closets and smaller equipment rooms where a full 42U, 48-inch-deep cabinet is impractical or won't clear the door swing or adjacent wall.
The 6001E-2432-B-SQM6 comes up regularly on projects where the integrator has already committed to a floor plan and a standard 42U, 32-inch-deep cabinet simply doesn't clear the room constraints. The 24-inch depth is the spec that drives the decision here — not the 31U height, which is easy to spec around. When you're laying out a network closet in a mid-size commercial building and the room is only 36 inches deep wall-to-wall, a 24-inch cabinet with a 6-inch service aisle behind it is the difference between a compliant install and a code problem on the door-swing clearance audit.
Technical Highlights:
- 31U Height: Enough capacity to stack a 2U rack-mount NVR, a 1U 24-port managed PoE switch, a 2U patch panel, and a 1U UPS with 25U of usable space remaining — realistic for a mid-size security closet without going to a full 42U tower.
- 24-Inch Depth: Targets the specific constraint in network closets and smaller server rooms where 32–48-inch cabinets create aisle or clearance violations. Most 1U switches and 2U recorders are under 18 inches deep, leaving rear cable management room inside this enclosure.
- Black Finish: Standard for commercial and enterprise environments — passes facilities and aesthetics review without a custom order, and reduces visible dust contrast on the exterior panels during operational walkthroughs.
Deployment Considerations:
- Before specifying this cabinet, measure your deepest piece of equipment and add at least 4 inches for rear cable routing. High-density patch panels with loaded connectors can push 20–22 inches, which is tight against a 24-inch interior.
- The 31U count is fixed — if your equipment list is growing and you're already near 25–28U committed, spec a 42U cabinet now rather than cascading to a second enclosure six months post-install.
This cabinet is the right call for a dedicated security equipment closet in a mid-rise commercial building, healthcare clinic, or school where the IT room was designed for a wall-mount panel and you're upgrading to floor-standing rack infrastructure for the first time.
