Panduit PLB4H-TL0 Double Loop Pan-Ty Cable Tie, 14.7 in., 120 lb., UV Black, Pack of 250

Overview

The Panduit PLB4H-TL0 is a double loop Pan-Ty cable tie engineered for applications where a single part needs to bundle and separate two harnesses simultaneously. At 14.7 inches (373 mm) long with a 120 lb. tensile strength rating, it handles substantial wiring bundles without the need to inventory multiple tie sizes — one part covers a range of harness diameters. Made from weather-resistant Nylon 6.6 with enhanced UV stabilization, the PLB4H-TL0 installs equally well in indoor control panels and exposed outdoor cable runs. Sold in packs of 250, with a carton quantity of 2,500, it fits both bench-stock replenishment and project-quantity purchasing. For those searching by alternate formatting: PLB4H-TL0 (often searched as PLB4H TL0).

Key Features

• Double Loop Design: A single tie captures and physically separates two cable harnesses at once. In structured wiring environments — relay panels, junction boxes, cable ladders — this eliminates the separate tie-and-spacer combination you'd otherwise need, cutting labor and parts count.
• 14.7 in. (373 mm) Length: Long enough to wrap larger harness bundles that shorter standard ties can't reach. The extra length also gives you loop-back slack when routing cables with tight bend-radius requirements.
• 120 lb. Tensile Strength: Semi-light cross-section, but the 120 lb. pull rating means the tie won't give way under the incidental lateral loads that occur in vibration-prone enclosures or during cable pulls. Not a heavy-duty industrial restraint, but well above the threshold for structured cable management in commercial and light industrial environments.
• Nylon 6.6 with UV Stabilization: Standard Nylon 6.6 embrittles and fails within months under direct sunlight. The UV-enhanced formulation on the PLB4H-TL0 extends service life in outdoor installations — rooftop cable trays, exterior conduit runs, CCTV mounting hardware cable drops — without requiring a separate outdoor-rated tie SKU.
• RoHS Compliant: Meets RoHS directive requirements, which matters when the finished assembly ships into EU markets or when a project specification requires RoHS compliance documentation on every installed component, including wire management hardware.
• Broad Harness Compatibility: Verified for use with Panduit cable managers GTH-E, GS4H-E, GS4EH-E, PTH, STH2, and ST3EH. If your installation uses any of these Panduit wire management systems, the PLB4H-TL0 integrates without modification or adapter hardware.
• Pack Quantity of 250 (Carton of 2,500): The 250-unit pack is sized for project use rather than just sampling. Carton quantities of 2,500 reduce per-unit cost for high-volume runs — useful when standardizing on a single tie SKU across a large wiring project or service depot inventory.

Integration & Compatibility

The PLB4H-TL0 is confirmed compatible with the following Panduit wire management systems: GTH-E, GS4H-E, GS4EH-E, PTH, STH2, and ST3EH. These cover a range of Panduit's horizontal and vertical cable manager families used in rack and enclosure installations. The double loop geometry is particularly useful in structured cabling environments where two discrete bundles — for example, a power run and a data run — must travel the same pathway while remaining physically separated for noise isolation or code compliance. For general cable management planning, verify bundle diameter against the tie's loop geometry before deploying at scale. The 14.7 in. length accommodates a wide range of bundle circumferences, which is the specific reason Panduit positions this as an inventory-reduction part: one PLB4H-TL0 replaces multiple shorter tie SKUs in mixed-diameter harness environments.

What's in the Box

• 250x Panduit PLB4H-TL0 Double Loop Pan-Ty Cable Ties (UV-stabilized Nylon 6.6, black, 14.7 in.)

Frequently Asked Questions

Q: What is the tensile strength of the PLB4H-TL0?

A: The PLB4H-TL0 is rated at 120 lb. tensile strength, which is appropriate for commercial wire management and structured cabling applications. It is classified as a semi-light cross-section tie.

Q: Can the PLB4H-TL0 be used outdoors?

A: Yes. The PLB4H-TL0 is manufactured from UV-stabilized Nylon 6.6 and is explicitly rated for both indoor and outdoor use. The enhanced UV resistance extends service life on exposed cable runs, rooftop trays, and exterior conduit drop points.

Q: Is the PLB4H-TL0 RoHS compliant?

A: Yes. The PLB4H-TL0 meets RoHS directive requirements, making it suitable for projects and assemblies destined for EU markets or where RoHS compliance documentation is required at the component level.

Q: What Panduit cable managers is the PLB4H-TL0 compatible with?

A: Panduit lists the PLB4H-TL0 as verified for use with GTH-E, GS4H-E, GS4EH-E, PTH, STH2, and ST3EH cable management systems.

Q: How many ties come in a pack, and what is the carton quantity?

A: Each pack contains 250 ties. The full carton quantity is 2,500 units, suitable for project-scale or depot-stock purchasing.

Q: Why use a double loop tie instead of two standard ties?

A: A double loop tie like the PLB4H-TL0 bundles and separates two harnesses with a single part, eliminating the need for a tie-plus-spacer combination. This reduces part count, speeds installation, and shrinks your wire management SKU inventory when harness diameters vary across a project.