i-PRO WV-QDC500C Dome Cover Assembly
Overview
The WV-QDC500C is a replacement dome cover assembly for i-PRO U21x0 and U25x0 series indoor dome cameras. Deploy this when the existing dome has accumulated scratches, fogging, or impact damage — a maintenance task that becomes routine on retail floors, office spaces, and institutional installations where dome covers face UV exposure and incidental contact over 2–3 years of service. The assembly preserves the camera's IR LED function; infrared illumination continues at the original specification after installation, so low-light performance remains unchanged.
Compatibility
This cover fits i-PRO U21x0 and U25x0 series indoor dome cameras exclusively. Verify your exact camera model against the product label or installation manual before ordering — the U21x0/U25x0 family documentation contains the complete compatibility cross-reference. Do not attempt installation on other dome series.
Installation Notes
Removal and installation require loosening three fixing screws that secure the dome cover anchor bracket to the enclosure. For outdoor camera models, the waterproof rubber gasket may separate during dome removal — inspect it for cracks or hardening and reattach it to its original position before installing the new cover to maintain weatherproofing integrity. Indoor models use a standard Phillips screwdriver; outdoor variants require the supplied bit. After installation, test IR LED irradiance and illuminance levels. If you select a smoke-type dome cover variant (which reduces IR range compared to clear covers), consult the camera's Installation Guide to verify output meets your low-light threshold. The datasheet and camera Installation Guide provide complete step-by-step procedures for removal and reattachment.
What's in the Box
- 1x Dome cover assembly (WV-QDC500)
- 1x Dome cover anchor bracket
- 3x Fixing screws
