Brother DK22053PK 2.4" Continuous Paper Label Roll, 3-Pack

Overview

The Brother DK22053PK is a genuine continuous paper label roll designed for Brother QL-series desktop label printers. Each roll delivers 100 feet of 2.4"-wide black-on-white label stock — cut to whatever length the job requires, no pre-cut sizing to work around. The pack ships three rolls, giving you 300 linear feet of label material before you need to reorder. For facilities teams, shipping departments, or security integrators labeling cable runs and patch panels, that depth of supply matters on a busy install day.

Because these are genuine Brother rolls, the media chip communicates directly with the printer — no manual media calibration, no misread roll-end sensors. The printer recognizes the DK22053PK automatically and adjusts feed tension and cutter timing accordingly.

Key Features

• 2.4" (62mm) roll width: Wide enough for multi-line labels, address blocks, or asset tags that need both a barcode and human-readable text side by side. Narrower DK rolls top out at 1.4" — this format gives you meaningfully more usable label real estate per cut.
• 100 feet per roll, cut-to-length: You control the label length at print time. Print a 1" flag label for a patch cable, then immediately print a 6" rack label on the same roll — no wasted pre-cut stock between jobs.
• 3 rolls per box (300 ft total): Multi-roll packs reduce per-roll unit cost and keep a working supply on hand. For security integrators running a full rack termination or a structured cabling job, one box typically covers a complete site without a mid-job reorder.
• Black on white print surface: High-contrast output that scans cleanly under barcode readers and reads clearly under typical equipment room lighting. White background is also the standard choice for asset management systems that photograph labels for inventory records.
• Genuine Brother media: Factory-new rolls sourced direct — not repackaged or grey-market stock. Genuine media maintains the printer's warranty coverage and avoids the feed jams and sensor errors that off-brand rolls can introduce.
• Broad QL-series compatibility: A single SKU covers the full QL printer lineup (see compatibility section below), so facilities teams standardizing on one label stock across multiple printer models don't need to stock separate SKUs.

Integration & Compatibility

The DK22053PK is compatible with the following Brother QL-series label printers: QL-500, QL-550, QL-570, QL-570VM, QL-580N, QL-600, QL-650TD, QL-700, QL-710W, QL-720NW, QL-800, QL-810W, QL-820NWB, QL-1050, QL-1050N, QL-1060N, QL-1100, and QL-1110NWB. If your site runs multiple QL models, this roll works across all of them — no media SKU fragmentation.

For label printer deployments integrated with Brother's P-touch Editor or network print management tools, the roll's media chip allows automatic recognition — the software reads roll type and width without manual entry. This matters in environments where multiple staff members swap rolls; wrong-media errors are caught at the printer, not discovered mid-print-run.

Integrators using QL printers for network infrastructure labeling — patch panels, switch ports, fiber terminations — will find the 2.4" width accommodates standard TIA-606 label formats with room for a port ID, location code, and circuit destination on a single cut.

What's in the Box

• 3x Brother DK-22053 Continuous Paper Label Rolls (2.4" x 100 ft each)

Frequently Asked Questions

Q: Which Brother printers is the DK22053PK compatible with?

A: The DK22053PK works with the QL-500, QL-550, QL-570, QL-570VM, QL-580N, QL-600, QL-650TD, QL-700, QL-710W, QL-720NW, QL-800, QL-810W, QL-820NWB, QL-1050, QL-1050N, QL-1060N, QL-1100, and QL-1110NWB. Check your printer model against this list before ordering.

Q: How much label stock is included in one box?

A: Each box contains 3 rolls, with each roll measuring 2.4" wide by 100 feet long — 300 linear feet of label stock total per box.

Q: Is the DK22053PK a cut-to-length or pre-cut label roll?

A: It is a continuous (cut-to-length) roll. The printer cuts each label to whatever length you specify at print time, so you are not locked into a fixed label height.

Q: What is the print color on the DK22053PK?

A: Black ink on a white label background — standard high-contrast output suitable for barcodes, asset tags, and general identification labels.

Q: Is the DK22053PK genuine Brother media or a compatible aftermarket roll?

A: The DK22053PK is genuine Brother label stock. Genuine rolls include the media chip that allows QL printers to auto-detect roll type and width, and they maintain compatibility with Brother's printer warranty terms.

Marty Allison

The detail I always flag with customers evaluating the DK22053PK is the 2.4" roll width paired with the cut-to-length format. On a structured cabling job where you're labeling both patch panel ports and the corresponding wall plate, that width gives you enough real estate for a port ID, a circuit destination, and a QR code on a single label — something the narrower DK rolls simply can't do without wrapping text or shrinking the font below scan-readable size.

Technical Highlights:

• 300 ft per box (3 × 100 ft rolls): Enough to label a full 48-port patch panel plus associated drops multiple times over — buy one box per rack termination job and you won't be hunting for spare rolls mid-install.
• Genuine media chip: The QL printer reads the chip on the DK22053PK and sets feed and cutter parameters automatically. This eliminates the manual media-type selection step that causes miscuts on off-brand rolls.
• Black on white, cut-to-length: High contrast for barcode readability; variable cut length means no wasted stock between a short port flag and a long asset tag on the same roll.

Deployment Considerations:

• The 2.4" width is the widest standard DK roll for the QL series — confirm your QL printer model supports 62mm media before ordering. Older QL-500 and QL-550 units do support it, but some non-QL Brother printers do not use the DK system at all.
• Cut-to-length stock has no pre-applied liner slits, so label removal from surfaces requires edge-starting by hand. For high-volume peel-and-apply workflows, a die-cut pre-sized DK roll may be faster — but for cable and infrastructure labeling where label length varies, continuous stock is the right call.

The DK22053PK is the right consumable for security integrators and IT infrastructure teams running QL-series printers on structured cabling and rack-labeling jobs — specifically where label dimensions vary per application and the 2.4" width is needed to meet TIA-606 or custom asset-tag format requirements.