Datalogic CAB-459 RS-232 Power Cable 9P Female Coiled
Overview
The Datalogic CAB-459 is a genuine OEM RS-232 power cable engineered for Datalogic barcode scanners, mobile terminals, and industrial data capture devices. This coiled cable combines serial communication (RS-232) and power delivery in a single connector, eliminating the need for separate power and data cables in warehouse, retail, and manufacturing environments. The 9-pin female connector and 3.6-meter (11.8 ft) reach make it suitable for standard production floor mounting scenarios where devices sit at moderate distances from host controllers or powered hubs.
Coiled construction is the key differentiator here: the cable stretches to its full 3.6-meter length when needed but retracts to roughly 1 meter when slack, minimizing clutter around dense scanner deployments without sacrificing functional reach. This matters in high-density warehouse picking stations or retail checkout lines where cable management directly affects safety compliance and troubleshooting speed.
Key Features
- Dual-function RS-232 + Power: Combines serial data and power delivery in a single 9-pin connector, reducing cable count and simplifying device installation compared to separate data and power runs.
- 3.6-meter reach: Accommodates standard warehouse mounting heights (scanners at 1.5–2.5 meters above floor) and moderate inter-device distances without requiring powered hubs or repeaters.
- Coiled design: Retracts when not in use to reduce trip hazards and desktop clutter; stretches on demand without kinking or connector stress.
- 9-pin female connector: Mates directly with Datalogic scanners and terminals equipped with 9-pin male RS-232/power connectors; verify your device pinout before ordering to confirm compatibility.
- Genuine OEM construction: Manufactured to Datalogic specifications; eliminates intermittent connections, data transmission errors, and power delivery failures common in third-party alternatives.
- Manufacturer warranty backed: Full compatibility assurance; OEM warranty covers defects in materials and workmanship, critical for mission-critical scanning operations.
Integration & Compatibility
The CAB-459 is designed for Datalogic barcode scanners, handheld terminals, and stationary data capture systems using 9-pin RS-232 connectors with integrated power pins. Before purchasing, confirm your Datalogic device manual specifies a 9-pin female connector and supports combined RS-232/power delivery. If your device requires standalone RS-232 (data only) or USB connectivity, a different cable will be necessary.
For large-scale deployments, stock at least one spare CAB-459 per ten active scanning stations to minimize unplanned downtime during cable failure. The coiled form factor makes storage efficient, and genuine OEM cables are more likely to maintain consistent pinout and power tolerance across replacement cycles than mixed third-party stock.
Deployment Considerations
The 3.6-meter reach is sufficient for most warehouse shelving and conveyor-integrated scanning stations, but if your setup requires mounting scanners more than 4 meters from a power source or host controller, verify cable routing in advance—longer runs may require powered repeaters or switched hubs with isolated power supplies. Coiled cables can occasionally develop memory (permanent coils) if stored under tension for months; uncoil and hang vertically during long storage periods.
Organizations running multi-shift warehouses should audit cable inventory regularly, as industrial cables are frequently damaged by forklifts, foot traffic, or improper coiling. Labeling each cable with its source device and date-of-installation helps track failure patterns and plan bulk replacement cycles.
When to Choose a Different Cable
If your Datalogic device specifies a different connector type (DB-9 male instead of 9-pin female, or USB-only connectivity), or if you require cable lengths beyond 3.6 meters, consult your Datalogic device documentation or contact the manufacturer for the correct part number. Do not force non-standard connectors; mismatches cause data loss and can damage power delivery circuits.
The Datalogic CAB-459 is a straightforward piece of infrastructure—a genuine OEM RS-232/power hybrid cable that does one job reliably. The 3.6-meter coiled design is the practical win here: you get full functional length without the workspace clutter that kills safety and efficiency on a busy warehouse floor.
Technical Highlights:
- 3.6-meter functional reach: Matches standard warehouse shelving heights and inter-device distances; avoids the need for powered repeaters or intermediate hubs in typical picking or checkout configurations.
- Coiled form factor: Retracts to ~1 meter when slack, reducing trip hazards and cable entanglement in high-traffic zones; stores efficiently in bulk replacement inventories.
- Dual RS-232 + power: Single connector eliminates separate data and power cable runs, lowering installation labor and reducing connector failure modes in dense scanner deployments.
Deployment Considerations:
- Verify your Datalogic device pinout before ordering; 9-pin female connectors are common but not universal. Check the device manual—a mismatch will force troubleshooting and replacement delays.
- Coiled cables can develop permanent memory if stored under tension for extended periods. Uncoil and hang vertically during long-term storage to preserve flexibility.
- In high-turnover warehouses, budget one spare cable per ten active scanning stations. Genuine OEM stock ensures consistent pinout and power tolerance across replacement cycles, avoiding intermittent connection failures that plague mixed third-party inventories.
The CAB-459 is the right choice for any Datalogic deployment using 9-pin RS-232/power connectors and requiring cable runs of 3.6 meters or less. Its coiled design pays dividends on congested production floors where cable clutter directly impacts safety and labor efficiency. Don't over-spec; this is a purpose-built accessory that handles its job well within its intended range.
Frequently Asked Questions
Q: Is the CAB-459 compatible with all Datalogic scanners?
A: No. The CAB-459 is designed for Datalogic devices with 9-pin female RS-232 connectors that support integrated power delivery. Check your device manual or contact Datalogic support to confirm compatibility before ordering. Using an incorrect cable risks data loss and power supply damage.
Q: Can I extend the CAB-459 beyond 3.6 meters?
A: Not recommended. The cable is engineered to deliver stable RS-232 data and power at 3.6 meters. Extending it via adapters or splitters introduces voltage drop, signal attenuation, and connection instability. For mounting distances beyond 3.6 meters, consult Datalogic documentation for a longer OEM cable or a powered repeater solution.
Q: What is included in the box with the CAB-459?
A: Only the cable itself. No mounting hardware, adapters, or accessories are included. If you require cable clips, strain relief, or connector covers, order those separately.
Q: Does the CAB-459 come with a warranty?
A: Yes. Genuine Datalogic OEM cables are covered by Datalogic's manufacturer warranty, which covers defects in materials and workmanship. Warranty terms and duration vary by region and reseller; confirm details with your supplier.
Q: How should I store the CAB-459 when not in use?
A: Uncoil and hang vertically to avoid permanent memory (permanent coils). Store in a dry environment away from heat sources and UV light. Coiled cables stored under tension for months can develop permanent kinks that reduce flexibility and increase connector stress.
