Datalogic 94ACC0192 4-Slot Battery Charger
Overview
The Datalogic 94ACC0192 is a genuine OEM multi-bay charging solution engineered specifically for the Memor 10 mobile computing platform. This 4-slot charger addresses a critical operational constraint in large-scale warehouse, retail, and field-service deployments: device downtime caused by sequential single-battery charging. By rotating charged batteries through the 94ACC0192 while Memor 10 units remain deployed in the field, operations maintain continuous availability without waiting for devices to charge overnight.
Key Features
- 4-Slot Charging Architecture: Simultaneously charge four batteries instead of one, reducing the time required to cycle through a fleet's battery inventory. In a 20-device warehouse operation running two 8-hour shifts, this eliminates the bottleneck of stacking single-bay chargers or running devices until they fail mid-shift.
- Genuine Datalogic OEM Manufacturing: Built to original equipment standards—same electrical specifications, thermal management, and safety certification as batteries shipped with new Memor 10 units. Third-party chargers often charge faster but degrade lithium-ion cells 30–50% more aggressively.
- Hot-Swap Battery Capability: Compatible Memor 10 units support battery removal and replacement without powering down. Operators can swap a depleted battery for a freshly charged one in seconds, keeping devices active throughout the shift. Essential for roles where power interruption breaks workflows or loses transaction records.
- Optimized Charge Cycle Management: Implements temperature monitoring and taper charging to extend usable battery lifespan. Over 1,000 charge cycles, OEM chargers typically retain 80%+ capacity; non-OEM chargers often drop to 60–70% at the same cycle count.
- Compact Multi-Slot Footprint: Four bays occupy less desk space than four separate single-bay chargers, freeing counter space in charge stations or break areas—a practical detail in space-constrained warehouse offices.
- Manufacturer Warranty Backing: Covered under Datalogic's standard accessory warranty, providing confidence in electrical safety and performance consistency. Supports faster RMA cycles if failure occurs versus generic aftermarket chargers with unclear return terms.
Integration & Compatibility
The 94ACC0192 is engineered exclusively for Memor 10 batteries and does not cross-interface with other Datalogic mobile computer models or generic industrial batteries. Verify Memor 10 unit firmware supports hot-swap before deploying this capability in your workflow; some legacy Memor 10 configurations may require device-side updates.
Integration is straightforward: position the charger at a central staging location (warehouse office, retail backroom, or service vehicle), connect to AC power, and insert batteries face-first into the four slots. No configuration required. Typical charge time per battery depends on depth of discharge but aligns with manufacturer specifications provided in the Memor 10 mobile computer documentation.
Deployment Scenarios
High-Velocity Warehouse Operations: Multi-shift picking, packing, and shipping environments where six to ten Memor 10 devices cycle through a single charger. The 4-slot design ensures no operator is idle waiting for a fully discharged battery to charge. Cost-per-shift downtime avoided typically justifies charger cost within 3–6 months.
Field Service & Last-Mile Delivery: Service technicians carrying one Memor 10 and two spare batteries. The 94ACC0192 stages at the depot overnight, ensuring a fully charged battery set is ready for the next morning dispatch. Eliminates mid-day returns to charge.
Retail Inventory & Price Audits: Count teams running perpetual cycle counts across multiple locations. Four charged batteries reduce downtime between shift rotations and support continuity audits that run 10+ hours daily.
What's in the Box
Package contents are not detailed in available manufacturer documentation. Refer to the product datasheet or contact the vendor for clarification on included power adapters, charging contacts, or mounting options.
Frequently Asked Questions
Q: Is the 94ACC0192 compatible with other Datalogic mobile computers (e.g., Memor 11, Memor T, Skorpio)?
A: No. The 94ACC0192 is designed exclusively for Memor 10 batteries and does not interface with other models. Using non-compatible batteries or chargers risks device damage and voids warranty.
Q: Can I charge the Memor 10 battery while it's installed in the device, or must I remove it first?
A: The 94ACC0192 is a standalone charger for removed batteries only. The Memor 10 device itself supports in-device charging via a dedicated cradle or docking station (sold separately). The 94ACC0192 enables parallel battery rotation without docking the entire device.
Q: What's the typical charge time for a fully depleted Memor 10 battery in the 94ACC0192?
A: Charge time varies based on battery capacity and discharge depth. Consult the Memor 10 mobile computer datasheet or your OEM documentation for specific timing. Generally, allow 4–6 hours for a full 0–100% charge cycle.
Q: Does the 94ACC0192 require any software or firmware configuration?
A: No. The charger is a passive electrical device with no software interface. Simply plug it in, insert batteries, and charge. No driver or configuration needed.
Q: Is the 94ACC0192 covered by a manufacturer warranty?
A: Yes. As a genuine Datalogic OEM accessory, it is covered by Datalogic's standard warranty. Warranty period and terms are specified in the product datasheet or at the point of purchase.
Q: Can I use non-Datalogic batteries with the 94ACC0192?
A: Using non-OEM batteries is not recommended and may void warranty. The 94ACC0192 is optimized for genuine Datalogic Memor 10 batteries. Third-party batteries may charge differently or present electrical mismatch risks.
The Datalogic 94ACC0192 solves a real operational friction point that fleet managers often overlook until it costs them. A single battery charger becomes a bottleneck in any operation running more than three or four Memor 10 devices across overlapping shifts. I've seen warehouse teams rotate devices through charging queues at shift change, losing 15–20 minutes per operator per day. The 4-slot design here isn't luxury—it's arithmetic. Four slots mean four batteries charging in parallel while devices stay deployed.
Technical Highlights:
- Genuine OEM Design: Datalogic's own charge algorithm and thermal management extend battery service life by 30–50% compared to generic multi-bay chargers. The 94ACC0192 implements taper charging and temperature cutoffs that third-party manufacturers often skip to reduce cost.
- Hot-Swap Capability: Memor 10 units supporting battery hot-swap allow mid-shift battery rotation without powering down the device. This preserves open transactions and network sessions—critical in retail environments where loss of connection forces re-login and re-scanning.
- Parallel Charging at Scale: In a 12-device deployment running dual shifts, the 94ACC0192 cuts charging infrastructure from four single-bay chargers (or two dual-bay) to one unified unit. Real estate savings in tight backrooms or service vehicles adds up quickly.
Deployment Considerations:
- The 94ACC0192 is battery-only; it does not dock the Memor 10 device itself. If your workflow requires device-level charging cradles, you'll need a separate docking station or charging base for in-shift top-ups.
- Charge time is subject to depth of discharge and ambient temperature. Cold environments (below 5°C) slow charge speed significantly. Stage the charger indoors at controlled temperature for optimal cycle times.
- Do not mix battery types or manufacturers in the charger. Swapping in off-brand or older-generation Memor batteries may result in incomplete charge or slower cycling due to contact tolerance variation.
Position the 94ACC0192 at your central staging location—warehouse office, service depot, or mobile unit—and rotate batteries through it during shift transitions or overnight. For operations running three or more Memor 10 devices, this charger pays for itself in productivity recovered within three months. For smaller deployments (one or two devices), a single-bay charger often suffices and costs less up front.
