Datalogic 94A150110 Skorpio X5 3-Slot Charging Dock
Overview
The Datalogic 94A150110 is a genuine OEM charging dock purpose-built for the Skorpio X5 mobile computer family. This accessory solves a common fleet management problem: charging multiple handheld devices sequentially wastes operational time and complicates shift handoff workflows. The 94A150110 addresses this by enabling simultaneous charging of up to three devices, meaning your team can stage an entire batch of Skorpio X5 units during a single shift transition rather than waiting for devices to charge one at a time.
Key Features
- 3-Slot Concurrent Charging: Charge three Skorpio X5 devices simultaneously — eliminates sequential charging delays and reduces the total dock footprint required per device. Critical for operations running multiple shifts where you need minimum two docks (six devices charging while six are deployed).
- Contact-Based Charging Connection: Uses direct electrical contacts rather than magnetic coupling — delivers consistent power delivery without contact wear or corrosion issues that can degrade charging reliability over thousands of insertion cycles.
- Genuine Datalogic OEM Design: Manufactured to identical specifications as original Skorpio X5 dock hardware. Avoids compatibility edge cases or firmware conflicts that sometimes occur with third-party charging solutions.
- Centralized Fleet Staging: Integrates into standard warehouse device management workflows where handheld computers are collected, charged, and redistributed between operational periods. Reduces charging infrastructure complexity compared to scattered single-device chargers.
- Manufacturer Warranty Coverage: Backed by Datalogic's standard warranty terms, ensuring repair or replacement if the dock fails within the covered period — reduces unplanned capital replacement risk.
Integration & Compatibility
The 94A150110 is compatible exclusively with Skorpio X5 mobile computers. Do not attempt to charge other Datalogic handheld models (Skorpio X3, Memor X3, ELF X3) using this dock — the contact interface and form factor are device-specific. Confirm your device model before purchase. For organizations deploying mixed handheld fleets, verify you have separate dock hardware for each device type.
Mounting the dock requires a stable flat surface, typically a wall-mounted bracket or bench space near shift-change areas. No additional power configuration is required beyond standard facility wiring; the dock is wired and ships ready for deployment. As a multi-device charging appliance, it should be positioned to minimize cable trip hazards and away from moisture-heavy warehouse zones (e.g., cold storage areas or high-humidity zones near water ingress points).
For larger deployments, calculate dock inventory as follows: divide active device count by three (dock capacity), then add one spare dock for maintenance rotation. Example: a 30-device fleet requires ten docks plus one backup. This ensures charging capacity is never a deployment constraint during peak shift transitions.
Deployment Context
This dock is essential infrastructure for any organization where Skorpio X5 devices are shared across operators or shifts. Warehouses, distribution centers, and field service operations all depend on predictable device availability — a depleted battery at shift start costs an operator's productivity for the entire period. The 94A150110 ensures devices are fully charged and staged before dispatch, eliminating start-of-shift delays and extending effective battery lifespan by enforcing consistent charging protocols.
Frequently Asked Questions
Q: Is the 94A150110 compatible with Skorpio X3 or other Datalogic handheld models?
A: No. The 94A150110 is designed specifically for Skorpio X5 devices. Attempting to charge incompatible models may damage the dock or device. Verify your device model before purchasing.
Q: How long does it take to fully charge three Skorpio X5 devices simultaneously?
A: Charging time depends on battery capacity and current battery state. Consult your Skorpio X5 documentation for specific charge times. Simultaneous charging delivers the same charge current per device as single-device charging, so total time is not reduced — only the total operational time is optimized because you charge multiple units in parallel rather than sequentially.
Q: Can the dock be wall-mounted, or does it require a bench?
A: The 94A150110 can be wall-mounted using standard mounting hardware (typically not included — verify with your supplier). A stable flat surface or mounting bracket is required. Ensure the installation location has sufficient electrical access and is away from high-moisture or temperature-extreme zones.
Q: What warranty coverage applies to the 94A150110?
A: The dock is backed by Datalogic's manufacturer warranty. Specific terms and duration should be verified at purchase. This coverage typically includes defects in materials and workmanship but does not cover accidental damage or misuse.
Q: How many docks should a fleet operation maintain?
A: Standard practice is one dock per three devices in use, plus one additional dock for rotation during maintenance. A 30-device fleet typically operates with 10–11 docks to ensure charging capacity never becomes a deployment constraint.
Ted PerryPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The Datalogic 94A150110 solves a genuine infrastructure problem in mobile-computer-dependent operations: charging bottlenecks. If your team deploys Skorpio X5 devices across shifts, you've already discovered that a single charger per device is economically wasteful and operationally inefficient. The 3-slot concurrent charging capacity of the 94A150110 cuts charging infrastructure costs roughly in half compared to single-device solutions while simultaneously reducing shift-start delays.
Technical Highlights:
- 3-Slot Concurrent Design: Three devices charging simultaneously means a 30-device fleet requires 10 docks instead of 30 single-chargers. Infrastructure cost per device drops significantly, and you reclaim physical space at charging stations.
- Contact-Based Architecture: Direct electrical contacts eliminate magnetic or inductive coupling vulnerabilities. After thousands of insertion cycles, contact chargers maintain consistent power delivery without the degradation that sometimes appears in wireless or magnetic systems used in high-turnover environments.
- Genuine OEM Manufacture: Built to original Skorpio X5 specifications — no firmware compatibility unknowns, no contact-interface edge cases, no risk of device damage from incompatible charging voltage or signaling.
Deployment Considerations:
- Exclusive Compatibility: The 94A150110 charges only Skorpio X5 units. Mixed-fleet operations (X5 + X3 + Memor devices) require separate dock hardware per model — verify your device roster before scaling dock inventory.
- Power and Space Planning: Each dock requires facility wiring and stable mounting space. A 30-device operation needs roughly 100–120 square inches of wall or bench space dedicated to charging infrastructure plus adequate electrical circuits. Plan for this during warehouse layout design.
The 94A150110 is the right choice for organizations running three or more Skorpio X5 devices in a shift-based or multi-operator model. If you're deploying five or fewer devices in a single-operator scenario, a simpler single-dock solution may suffice. For anything larger — distribution centers, package handling, field service fleets — the concurrent 3-slot model becomes cost-effective infrastructure on day one.
