Datalogic 90A052302 USB+PWR Cable 2M Straight
Overview
The Datalogic 90A052302 is a genuine OEM USB+PWR cable engineered for integrated power and data delivery to enterprise-grade barcode scanners, mobile computers, and logistics hardware. This 2-meter straight-connector cable eliminates the need for dual-cable runs (separate USB and power lines) — a significant advantage in high-density deployments where cable management overhead directly impacts installation cost and device reliability. The 90A052302 uses Datalogic's proprietary USB+PWR connector pinout, meaning third-party alternatives or incorrect substitutes will either fail to seat properly or deliver incomplete power, leading to intermittent failures in production environments. Using the correct OEM cable is non-negotiable for warranty coverage and predictable device operation across scanner fleets.
Key Features
- Integrated USB+PWR connector: Single connector delivers both USB data and DC power simultaneously, cutting deployment time by eliminating the need to route and terminate separate power and data cables — particularly valuable in warehouse staging areas where dozens of devices are commissioned in parallel.
- 2-meter length: Reaches from a desk-mounted or wall-mounted scanner to a nearby terminal or charging station without slack or tension, reducing stress on the connector and supporting flexible workstation layouts.
- Straight connector configuration: Orients perpendicular to the device port, ideal for horizontal placement on scanners, tablets, or fixed POS terminals where angled or right-angle connectors would create mechanical strain or occupy shelf space awkwardly.
- Black shielded construction: Multi-layer shielding reduces electromagnetic interference (EMI) from warehouse RF systems, power distribution equipment, and radio scanners — critical in noisy industrial environments where unshielded data lines often exhibit bit errors or data corruption.
- Genuine OEM manufacture: Built to original Datalogic specifications, including correct pin voltage, current ratings, and connector mechanical tolerances — ensures compatibility with Datalogic scanners and mobile computers and maintains manufacturer warranty eligibility.
- Backed by manufacturer warranty: OEM status means defects in materials or workmanship are covered under Datalogic support channels, whereas third-party cables offer no recourse if intermittent power delivery or data loss occurs mid-deployment.
Integration & Compatibility
The 90A052302 is designed for Datalogic enterprise scanning and mobile hardware platforms that use the integrated USB+PWR connector. Compatible device families include fixed-mount barcode readers, mobile data terminals, and retail POS peripherals. Before ordering, verify that your scanner or mobile computer has the matching USB+PWR port — this is NOT a standard USB-C, Micro-USB, or proprietary dock connector, so visual confirmation at the device port is essential. If you are unsure of your device's connector type, consult your device manual or contact the manufacturer's support team to avoid ordering an incompatible cable.
Deployment Considerations
In warehouse and retail environments, cable wear and connector fatigue are leading causes of device downtime. The 90A052302's integrated design concentrates both power and data in a single connector, which means a single failed connector takes both functions offline — there is no fallback to data-only or power-only operation. Maintain spare cables in inventory proportional to your deployed device count; a general guideline is one spare cable per 20–30 active scanners. The 2-meter length suits fixed-mount scenarios and seated mobile operations; for mobile hand-held scanners requiring extended reach or frequent relocation, consider cable routing through ceiling conduit or along workbench edges to protect the connector from repeated bending. Test replacement cables with your device before full deployment to confirm proper seating and power delivery, particularly if devices have seen heavy use and connector ports may be slightly worn.
FAQ
Q: Is the Datalogic 90A052302 compatible with non-Datalogic scanners?
A: No. The USB+PWR connector is proprietary to Datalogic hardware. Third-party or generic USB cables will not fit or will deliver incorrect voltage/pinout, risking device damage or no operation. Always use OEM cables for the specific scanner model.
Q: What length options are available for the Datalogic 90A052302?
A: The 90A052302 is a 2-meter cable. If a different length is required, consult Datalogic's cable catalog for alternative part numbers with different lengths.
Q: Can the 90A052302 be extended with adapters or couplers?
A: Extension couplers or adapters for the USB+PWR connector are not commonly available and are not recommended, as they introduce additional connection points and impedance mismatches that can degrade power delivery or cause intermittent data errors. If additional length is needed, obtain a longer OEM cable rather than extending a shorter one.
Q: Does the 90A052302 support fast charging or higher power delivery?
A: The 90A052302 delivers power and data at the specifications set by the connected Datalogic device. Power delivery is device-limited, not cable-limited. Consult your device documentation for maximum power draw and charging speed.
Q: What is the warranty on the Datalogic 90A052302?
A: As a genuine OEM cable, the 90A052302 is covered under Datalogic's standard warranty for accessories. Refer to your sales documentation or contact Datalogic support for specific terms and duration.
Ted PerryPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
The Datalogic 90A052302 is a straightforward but critical piece of infrastructure in any Datalogic scanner deployment. At 2 meters with a straight connector and shielded construction, it addresses the most common real-world pain point: cable inventory management at scale. I've seen facilities order the wrong connector type or grab unmarked cables during device commissioning, and the result is always the same — intermittent power failures or data corruption during peak warehouse operations. The 90A052302 eliminates ambiguity by being vendor-specific and OEM-certified.
Technical Highlights:
- Integrated USB+PWR pinout: Both power and data flow through a single Datalogic-proprietary connector, reducing cable bundle complexity and the risk of swapping power and ground on a generic connector — a mistake that can damage scanner ports.
- 2-meter reach: Long enough for fixed-mount scanners on an assembly line or checkout counter, but short enough that cable slack doesn't become a tripping hazard or get tangled in machinery.
- Multi-layer shielding: Warehouse RF systems and wireless scanners operate on 2.4GHz and 5GHz bands; unshielded cables in those environments will pick up noise and cause CRC errors on USB packets, forcing retransmissions and slowing data throughput.
Deployment Considerations:
- The 90A052302 concentrates both power and data in one connector — a single point of failure means total device downtime, not partial degradation. Stock spares proportionally (one per 20–30 scanners is a practical baseline).
- Connector wear is the leading failure mode; frequent unplugging and replugging will eventually loosen the connector mechanical fit. If you see intermittent power loss after a few months, the connector is likely worn, and cable replacement is the fastest fix.
This cable is essential for fixed scanner installations in warehouse, retail, and logistics environments where you need reliable power and data in one simple connector. Do not substitute third-party cables — the pin configuration alone makes them incompatible.
