Datalogic 90A052072 CAB-426 USB Type A Cable 3.7M
Overview
The Datalogic CAB-426 (SKU: 90A052072) is a genuine OEM USB Type A cable engineered for Datalogic enterprise devices and industrial scanning equipment. At 3.7 meters, this straight-connector cable bridges connectivity gaps across production lines, scanning stations, and device docking areas without requiring intermediary connectors or splitters. Built to original equipment specifications, it delivers both data transmission and power delivery in environments where signal integrity and uptime matter — manufacturing floors, logistics hubs, and retail operations.
Key Features
- Genuine OEM Construction: Manufactured to Datalogic's original specifications — proper pin configuration and certified shielding eliminate intermittent connection issues and signal noise that third-party alternatives introduce. Reduces troubleshooting time when connectivity fails mid-shift.
- USB Type A Straight Connector: Standard USB Type A termination works with any compatible Datalogic host device without adapters. Straight configuration avoids the bulk and failure points of right-angle connectors in tight spaces.
- 3.7-Meter Length: Approximately 12 feet of reach. Long enough to span from a barcode scanner or mobile computer to a docking station or NVR without slack pooling in walkways, but short enough to maintain signal quality. Longer cables degrade data integrity; measure your run before ordering additional lengths.
- Signal Integrity & Shielding: Certified shielding prevents electromagnetic interference (EMI) from nearby machinery, power lines, or wireless equipment. Critical in noisy industrial RF environments where unshielded cables drop frames or lose sync.
- Data & Power Delivery: Supports concurrent power and data over a single cable — no separate power adapter needed for light-duty devices. Datalogic devices drawing under 13W via standard 802.3af PoE equivalent loads work without strain.
- Manufacturer Warranty: Backed by Datalogic warranty terms. Genuine OEM cables carry better protection than aftermarket alternatives if connectors fail or insulation degrades.
Integration & Compatibility
This cable integrates with the Datalogic scanner and mobile computer lineup that standardizes on USB Type A host connectivity. Verify your device documentation before ordering — confirm the host port is USB Type A (not mini-USB, USB-C, or proprietary connectors). Installation is plug-and-play: no drivers or configuration required. For network video recorders or edge appliances with USB ports, this cable enables peripheral attachment (external storage, authentication keys, or debug interfaces). In warehouse automation, use this to tether mobile barcode scanners to docking chargers or host computers without constant adapter juggling.
When to Choose a Different Cable
If your run exceeds 3.7 meters, consider longer OEM variants in the Datalogic cable family — signal quality degrades significantly beyond 15–20 feet without active repeaters. If your device uses USB-C or mini-USB, this straight Type A connector will not fit; order the appropriate Datalogic variant for that connector type. For harsh outdoor or submersed deployments, verify cable rating — this is standard industrial grade, not IP67 or higher rated. Coiled or retractable cable housings are available separately if space is tight.
Deployment Scenarios
Production lines integrating Datalogic barcode scanners to inventory management systems benefit from the 3.7M reach without adding relay boxes. Logistics hubs deploying mobile computers at packing stations use this cable to connect night-charging docks to central servers. Multi-device industrial facilities maintain a stock of genuine OEM cables to minimize downtime — third-party substitutes often introduce intermittent sync loss mid-shift, creating hours of troubleshooting.
Frequently Asked Questions
Q: Will the Datalogic 90A052072 CAB-426 work with non-Datalogic USB Type A devices?
A: Yes, this is a standard USB Type A cable and will work with any device that has a USB Type A host port. However, Datalogic manufactures it to their OEM specifications for guaranteed compatibility with Datalogic equipment. For non-Datalogic devices, a standard third-party USB cable may suffice, but OEM construction ensures signal integrity in industrial noise environments.
Q: What is the maximum safe cable run length before signal degradation?
A: At 3.7 meters (approximately 12 feet), the CAB-426 delivers reliable signal and power within industrial standards. USB Type A cables generally remain stable up to 15–20 feet before EMI sensitivity increases. If you need longer runs, order additional OEM cable lengths or use active repeaters; daisy-chaining multiple cables introduces connection points that fail.
Q: Is this cable rated for outdoor or wet environments?
A: The CAB-426 is designed for standard industrial indoor use. If you require outdoor or submersed connectivity, confirm the cable's IP rating with Datalogic or consider weather-sealed connector housings as separate accessories. Wet environments can degrade standard USB connectors over time.
Q: Can the 90A052072 deliver power to devices that draw more than 15W?
A: This OEM cable supports standard USB power delivery (up to 500mA at 5V on USB 2.0, or up to 900mA on USB 3.0 if the host supports it). Devices requiring more than 13–15W need a separate power supply or a higher-capacity USB power delivery (USB PD) certified cable. Check your device's power specifications in its technical documentation.
Q: What is the warranty on this cable?
A: The CAB-426 is backed by Datalogic's manufacturer warranty. Warranty terms vary by region and reseller; contact your supplier or Datalogic directly for the exact coverage period and terms. OEM cables typically carry 1–3 year coverage against defects in materials and workmanship.
The Datalogic CAB-426 (90A052072) is straightforward cable engineering: OEM build quality, certified shielding, and a 3.7-meter run that avoids the two common pitfalls of industrial USB deployments — intermittent sync loss from cheap adapters and EMI noise from unshielded knockoffs. If you've ever swapped a failing third-party scanner cable mid-shift only to discover the replacement has the same noise floor, you understand why Datalogic's own cable matters.
Technical Highlights:
- Certified Shielding & Pin Configuration: Eliminates EMI-induced frame loss and keeps signal clean in high-RF environments (production floors with wireless scanners, RF RFID gates). Third-party cables often skip proper shielding to cut cost, leaving you with intermittent drop-outs that take hours to diagnose.
- 3.7-Meter Length (12 feet): Long enough to span from a barcode scanner station to a docking charger or NVR without daisy-chaining adapters, but short enough to preserve signal integrity. USB signal quality drops noticeably beyond 20 feet; if your run is longer, don't stretch it — order a second OEM cable or use an active repeater.
- Concurrent Data & Power Delivery: Supports light-load devices (under 13W) without a separate power supply. Useful for mobile inventory scanners that charge and sync simultaneously in a docking station, reducing cable clutter and connection points.
Deployment Considerations:
- Measure Your Run First: 3.7 meters is fixed — if your installation needs 25 feet, you'll be tempted to use an extension or coupler, which introduces another failure point. Plan the layout before ordering; if you need longer, request a longer OEM cable variant or relocate the device.
- Third-Party Cables Will Fail Differently: Cheap USB cables often introduce sync errors that are nearly impossible to reproduce during testing, only to crop up in production at 3 a.m. on a Tuesday. The warranty and OEM pedigree of the CAB-426 means you can troubleshoot with confidence that the cable isn't the culprit.
Stock this cable in your spare parts inventory if you're managing a Datalogic scanner or mobile computer deployment across multiple stations. The cost of one OEM cable is offset by avoiding a 30-minute troubleshooting call when a third-party substitute fails. For warehouse automation or retail scanning environments where uptime is measured in seconds, the 90A052072 CAB-426 is the right choice over generic USB alternatives.
