Datalogic 6003-0942 IEC C13 Power Cord Brazil Certified
The Datalogic 6003-0942 is an OEM power cord engineered for Datalogic enterprise scanners and mobile terminals operating in industrial environments where power stability directly impacts uptime. This IEC C13-connector cord is Brazil-certified and built to Datalogic's electrical specifications, including overcurrent protection and EMI shielding to safeguard connected devices from voltage transients and electromagnetic noise common on production floors and warehouse power grids.
Key Features
- IEC C13 Connector: Standard three-prong plug format compatible with all Datalogic scanners and mobile terminals rated for this connector type. Secure mating ensures no intermittent power loss during high-motion scanning or mobile deployment.
- Overcurrent Protection: Built-in circuit protection prevents device damage if power supply faults occur. Eliminates cascading failures that can disable multiple units on the same circuit.
- EMI Shielding: Electromagnetic interference suppression reduces noise-induced errors in barcode reads and data transmission on noisy industrial floors. Critical in RF-dense environments near wireless access points or RF welding equipment.
- Brazil Regional Certification: Meets local electrical standards (NBR IEC 60320-2-D) for safe operation in South American deployments. Required for compliance in regulated facilities.
- OEM Manufacturing: Datalogic original-equipment quality — no third-party adapters with mismatched voltage or inadequate protection circuitry. Eliminates warranty voidance risk on connected devices.
- Industrial Durability: 0.6 lb cord weight rated for repeated coiling and mobile scanning arm flexing. Designed for 24/7 warehouse and manufacturing operations without premature failure.
Using genuine OEM power cords eliminates the false economy of generic IEC C13 cords. A third-party cord with unspecified voltage tolerance or missing EMI filtration can introduce transients that degrade scanner sensor circuitry over months, leading to intermittent read failures, warranty denial, and unexpected replacement capex. Datalogic's engineered protection ensures predictable device lifecycle and eliminates troubleshooting cycles spent chasing power-related ghosts.
This cord is essential inventory for organizations running Datalogic device fleets across retail POS systems, warehouse management operations, and manufacturing data capture points. Maintaining 1–2 spare OEM cords per 10 active scanners minimizes downtime from accidental cord damage or environmental wear. Sourcing direct from the manufacturer or channel partner prevents grey-market cords with substandard shielding or connectors that fail under tension.
The 6003-0942 integrates seamlessly into existing Datalogic deployments without compatibility surprises. For mixed-brand environments (Datalogic + Symbol + Honeywell scanners), confirm connector type before purchase — this cord is IEC C13 only and will not fit USB or proprietary connectors. Regional certification matters: Brazil-certified cords meet NBR electrical code; if deploying to Mexico or other LATAM markets, verify local certification requirements separately.
Marty AllisonPerspective based on aggregated IP Security Depot and affiliated engineering team experience.
In our experience, power cords rank low on the procurement priority list until they fail — then they become the single point of failure that stops an entire scanning line or warehouse operation. We've seen teams grab whatever IEC C13 cord is in stock, only to discover 6 months later that intermittent scanner lockups trace back to voltage sag on a low-quality cord without proper overcurrent isolation. The Datalogic 6003-0942 is the OEM-correct answer. It costs more than a generic office-supply IEC C13, but it eliminates the risk surface entirely. The overcurrent and EMI features aren't redundant — they're the difference between a 5-year device lifecycle and a 2-year one in harsh industrial settings. For Brazil-specific deployments, the regional certification removes compliance ambiguity; you're not guessing whether your cord meets local electrical code. The one trade-off: this is a power cord, not a bundle or multi-pack, so you need to order multiple units if you're outfitting a fleet. Plan inventory accordingly.
Technical Highlights:
- Overcurrent Protection: Prevents voltage transient damage to scanner power supplies and sensor electronics. In warehouse environments with aging electrical infrastructure, this single feature avoids $800–2000 device replacements triggered by a momentary power surge.
- EMI Shielding: Datalogic's implementation filters both conducted and radiated noise. On RF-saturated floors (WiFi, RFID gates, cordless phones), unshielded cords introduce read-error noise that balloons support tickets and slows throughput. Shielding eliminates that variable entirely.
- Brazil NBR Certification: Compliance with local electrical standards is non-negotiable in regulated warehouses or pharmaceutical/food manufacturing. This cord ships with the correct regional approval; using generic cords risks facility audit findings.
- OEM Connector Integrity: Datalogic-specified contact resistance and mating force ensure zero intermittent disconnects during arm movement or mobile scanning. Cheap cords develop micro-arcing at the connector over months of flexing.
Deployment Considerations:
- Verify your Datalogic device connector type before ordering — this is IEC C13 only. Symbol MC3190 and MC3090 terminals use the same connector; Honeywell CK3X uses a proprietary connector and will not fit this cord.
- In high-EMI environments (RF welding, induction heating, wireless charging pads), route the cord away from power feeders and use ferrite clamps at device entry points if intermittent read failures occur despite the cord's shielding.
- For high-motion mobile scanning, coil the cord loosely with a velcro tie rather than tight wrapping; tight coils stress the connector strain relief and reduce cord lifespan under daily flexing.
- Maintain 2–3 spare cords per 10 scanners in your spares kit. Power cord failure is not predictable; you cannot troubleshoot it remotely. A spare OEM cord in the field eliminates 30-minute truck rolls or overnight downtime.
- Store spares in a dry, temperature-stable area (avoid damp shipping containers); over-humidity can corrode internal connector plating, especially in tropical regions. Check spares every 12 months for physical damage or discoloration at the connector.
The 6003-0942 is the correct choice for any team running Datalogic scanners in Brazil or other regulated LATAM markets, or for organizations that have experienced power-related device failures in the past. It's not flashy, but it's the foundation of reliable mobile and handheld scanning operations. For fleet-wide guidance on spares and spare-part strategy, visit the Datalogic catalog.
