Panduit DAP-5AMP-KIT Data Access Port 5 Amp Circuit Breaker Kit

Overview

The Panduit DAP-5AMP-KIT is a purpose-built replacement and retrofit circuit breaker kit rated at 5 amps, designed specifically for Panduit Data Access Port (DAP) assemblies used in structured cabling and safety and security infrastructure. If you're maintaining or expanding a DAP installation and need overcurrent protection that fits the factory housing without modification, this kit is the direct answer — sold as a single kit per package, with cases of 10 available for larger deployments.

Data Access Ports are commonly deployed in active safety device networks — think powered cable distribution in security, surveillance, and building automation runs. A failed or undersized breaker in that environment can knock out an entire branch. The DAP-5AMP-KIT replaces the breaker without requiring a full DAP assembly swap, which keeps downtime and labor cost low.

Key Features

• 5 Amp Rating: Matched to the current-carrying profile of a single DAP branch. At 5A, you get enough headroom for typical low-voltage loads on a single circuit without the nuisance tripping you'd see from an undersized 3A breaker — and without the risk of running a 10A where a 5A was designed.
• Kit Format (Package Qty: 1): Sold as a self-contained kit — everything needed to install the breaker is included in one package. No hunting for separate hardware. For larger jobs or stocking purposes, the carton quantity is 10 units, making procurement straightforward for facilities teams or integrators maintaining multiple DAP installations.
• OEM-Fit for Panduit DAP Assemblies: Engineered to fit the existing Panduit Data Access Port housing. Drop-in replacement means no field modifications, no voided assembly warranties, and no adapter hardware — the breaker seats as it did from the factory.
• Safety-Security Category: Sourced and classified within Panduit's active safety device line. This isn't a generic DIN-rail breaker repackaged — it's a component designed for the specific mechanical and electrical interface of the DAP platform, which matters when the downstream load is security equipment that can't tolerate intermittent power.
• Genuine Panduit Component: Factory-new, genuine Panduit — no grey-market, no parallel imports. For integrators working under system warranties or service contracts that require OEM parts, this is the correct procurement path.

Integration & Compatibility

The DAP-5AMP-KIT (also searched as DAP 5AMP KIT) is designed for use with Panduit Data Access Port assemblies in structured cabling environments. Verify your existing DAP assembly model against Panduit's product compatibility documentation before ordering — DAP platforms span multiple generations and form factors, and while the 5A breaker kit covers the standard DAP breaker slot, confirming fit against your specific assembly prevents a return. For cable management infrastructure projects pairing DAPs with patch panels or active equipment, the 5A rating is the correct starting point for most single-branch low-voltage security loads.

What's in the Box

• 1x Panduit 5 Amp Circuit Breaker Kit for Data Access Port

Frequently Asked Questions

Q: What is the DAP-5AMP-KIT designed to replace?

A: The DAP-5AMP-KIT is a 5 amp circuit breaker kit built specifically for Panduit Data Access Port (DAP) assemblies. It is intended as a replacement or retrofit component for the breaker slot within compatible DAP housings.

Q: How many units come in one package?

A: One kit per package (Package Qty: 1). If you need to stock or deploy across multiple DAP assemblies, the carton quantity is 10 units.

Q: Is this a generic circuit breaker or a Panduit-specific component?

A: This is a genuine Panduit component engineered to fit the specific mechanical and electrical interface of Panduit DAP assemblies. It is not a generic DIN-rail breaker — the form factor and rating are matched to the DAP platform.

Q: What amperage does the DAP-5AMP-KIT provide?

A: The kit provides 5 amp overcurrent protection, matched to the rated branch capacity of a standard Panduit Data Access Port circuit.

Q: Can this kit be used for non-Panduit Data Access Port assemblies?

A: Based on available evidence, the DAP-5AMP-KIT is designed for Panduit DAP assemblies. Compatibility with third-party housings is not documented and cannot be confirmed — consult Panduit's product compatibility data for your specific assembly.

Karl Wilson

The DAP-5AMP-KIT comes up in structured cabling service work more than people expect. When a breaker in an active Data Access Port assembly trips or fails, the reflex is often to pull the whole DAP — but that's unnecessary labor when the component is this accessible. At 5 amps, the rating is deliberate: it's the current threshold Panduit sized to the DAP branch, and substituting a higher-rated breaker to avoid nuisance trips is the wrong fix. If a 5A breaker is tripping, the downstream load calculation needs to be revisited, not the breaker spec.

Technical Highlights:

• 5A Overcurrent Rating: Correctly sized for a single Panduit DAP branch. Swapping to a 10A to stop tripping will mask an overload condition — don't do it.
• Kit Format, Package Qty 1: Complete kit in a single package — no separate hardware sourcing. Carton of 10 makes sense for facilities teams maintaining multiple DAP runs across a building.
• OEM Component: Genuine Panduit part, factory-new. Fits the DAP housing without field modification — seats identically to the original.

Deployment Considerations:

• Confirm your DAP assembly model before ordering — Panduit's DAP platform spans generations, and while the 5A kit is the standard breaker for most assemblies, verifying against your specific housing avoids a mismatch.
• This is a single-kit package (Qty: 1). For planned maintenance programs or multi-site deployments, order at the carton level (10 units) to keep spares on the shelf — a breaker failure in an active security or building automation run is not a good time to be waiting on a reorder.

For facilities engineers and security integrators maintaining Panduit DAP installations in commercial buildings, the DAP-5AMP-KIT belongs in the service kit alongside patch cables and RJ-45 tooling — it's the part you want on hand before you need it, not after a branch goes dark.