CyberPower CSB806R1 8-Outlet Surge Protector with USB Charging
Overview
The CyberPower CSB806R1 is an 8-outlet surge protector built for workstations, AV equipment racks, and security system installations where clean, protected power matters as much as outlet count. With a 4800-joule surge energy rating and 32 dB of EMI/RFI noise filtering on a single 15A / 125V circuit, the CSB806R1 handles the kind of electrical environment common in commercial facilities — shared circuits, HVAC switching transients, and fluorescent-lamp interference — without requiring a dedicated UPS for every device on the strip. The black plastic housing keeps it unobtrusive in equipment rooms or under desks, and the 1.8-meter (6-foot) cord reaches standard wall outlets without an extension cable in most rack-adjacent installations.
Key Features
- 4800-Joule Surge Energy Rating: Higher joule ratings absorb more cumulative surge energy before the internal MOV protection degrades. At 4800 J, the CSB806R1 sits well above entry-level 1000–2000 J strips — meaningful for installations where lightning-induced transients or utility switching events are a recurring concern. More joules = longer service life under real-world surge conditions.
- 8 NEMA 5-15R Outlets: Eight standard three-prong outlets on a single strip eliminate the daisy-chaining that creates fire hazards and NEC violations in commercial spaces. Power a NVR, switch, camera PSU, monitor, and ancillary gear from one protected source. The NEMA 5-15P input plug fits any standard grounded 15A wall receptacle — no adapter needed.
- 15A / 1875W Peak Power Capacity: The 15-amp continuous rating supports up to 1875W of connected load — enough headroom for mixed security and IT equipment without tripping the breaker under normal operating conditions. Size your load below 80% of rated capacity (roughly 1500W) for sustained reliability.
- 32 dB EMI/RFI Noise Filtering: Electronic noise from motors, HVAC compressors, and switching power supplies rides your building's AC wiring and degrades sensitive equipment performance. 32 dB of attenuation cuts that interference to a fraction, which matters for IP cameras with onboard processing and network switches that require clean power to avoid packet errors and reboot cycles.
- 2.4A USB Charging Port: The integrated 2.4A USB-A port charges tablets, phones, and handheld scanners without consuming one of the eight AC outlets. In security control rooms and guard stations where mobile device charging is constant, this keeps outlets free for equipment.
- 125V / 15A Input — Standard Circuit Compatible: Designed for North American 15A circuits, the CSB806R1 installs on any standard commercial or residential branch circuit without electrical modifications. The NEMA 5-15P plug is universally accepted on grounded outlets across the US and Canada.
- FCC, ICES, cETLus, and RoHS Certified: The cETLus listing confirms the unit has been independently tested to UL safety standards for both the US and Canada — a requirement in many commercial AV and security installations where the AHJ (Authority Having Jurisdiction) checks for listed equipment. RoHS compliance addresses disposal requirements in municipalities and enterprises with environmental procurement policies. FCC and ICES certifications confirm the unit meets emissions standards and won't itself be a source of RF interference.
- 1.8-Meter (6-Foot) Cord: The six-foot power cord gives enough reach to mount the strip on the underside of a desk or inside a shallow rack bay while still reaching a wall outlet or floor-level receptacle — without a visible extension cord running across a floor.
Integration & Compatibility
The CSB806R1 is compatible with any North American 125V, 15A grounded circuit. Its NEMA 5-15R outlets accept all standard North American three-prong plugs, making it a drop-in power distribution solution for network video recorders, PoE switch power supplies, desktop workstations, and AV control equipment. For installations requiring rack-mount power distribution, consider a 1U or 2U rack-mount PDU in the power protection category instead — the CSB806R1 is a tabletop/desktop form factor without rack ears. The integrated EMI/RFI filter pairs well with sensitive IP camera power supplies and managed switches where line noise can cause intermittent connectivity issues. If your installation requires battery backup in addition to surge protection, evaluate a UPS with surge protection from the CyberPower line — the CSB806R1 provides surge and noise filtering only, with no battery backup capability. For deployments with higher wattage requirements or rack-mount needs, review the broader CyberPower power protection catalog for PDU and UPS alternatives.
Frequently Asked Questions
Q: What is the surge energy rating on the CSB806R1?
A: The CSB806R1 carries a 4800-joule surge energy rating. This represents the cumulative surge energy the unit can absorb before MOV protection degrades — substantially higher than most entry-level strips in the 1000–2000 J range.
Q: Does the CSB806R1 include battery backup (UPS) functionality?
A: No. The CSB806R1 is a surge protector with EMI/RFI filtering only — it does not include a battery or UPS function. If you need battery backup in addition to surge protection, you will need a separate UPS unit.
Q: How many outlets does the CSB806R1 provide, and what type are they?
A: The CSB806R1 provides 8 NEMA 5-15R outlets, which accept standard North American three-prong plugs. The unit draws power through a NEMA 5-15P input plug on a standard 15A grounded circuit.
Q: What certifications does the CSB806R1 carry?
A: The CSB806R1 is certified FCC, ICES, cETLus, and RoHS compliant. The cETLus listing confirms independent third-party testing to UL safety standards for the US and Canadian markets.
Q: Can I use the CSB806R1 in a server rack?
A: The CSB806R1 is a tabletop/desktop strip form factor without rack-mount ears or a 1U chassis. It can be placed on a rack shelf or used in a rack-adjacent position, but it is not designed for direct 1U rack mounting. For rack-mount power distribution, consider a purpose-built rack PDU.
Q: What is the USB charging output on the CSB806R1?
A: The CSB806R1 includes one USB-A charging port rated at 2.4A output, suitable for charging tablets, smartphones, and handheld devices without occupying an AC outlet.
The spec that stands out on the CSB806R1 is the 32 dB EMI/RFI noise filtering — that's not a number most buyers look at, but it's what separates this strip from a bare MOV-only unit in environments with dirty power. I've seen managed PoE switches reboot randomly in facilities with HVAC on shared circuits; the noise filter on a unit like this often clears that up without having to run a dedicated circuit. If you're powering IP cameras, NVRs, or network gear off the same branch as motors or fluorescent ballasts, the filtering spec on the CSB806R1 matters.
Technical Highlights:
- 4800 J Surge Rating: At twice or more the joule capacity of consumer-grade strips, this rating gives you meaningful protection longevity in commercial installations where transients are a regular occurrence — not a one-time event.
- 32 dB EMI/RFI Attenuation: Cuts line-conducted interference to a fraction of its source amplitude — relevant when powering IP cameras and switches on shared building circuits with HVAC, compressors, or older fluorescent lighting.
- 2.4A USB + 8 AC Outlets on 15A Circuit: The USB port preserves all 8 NEMA 5-15R outlets for equipment — a small but practical detail in dense security head-end installations where every outlet counts.
Deployment Considerations:
- The CSB806R1 is rated for 15A / 1875W continuous — keep total connected load below ~1500W (80% of rated) to avoid nuisance trips, especially in warm equipment rooms where power supplies run at higher current draw.
- This is a surge protector, not a UPS — a single power interruption will take down everything connected to it. Size your critical security gear (NVR, primary switch) to a UPS; use the CSB806R1 for secondary and non-critical loads like monitors, desk phones, and charging stations.
The CSB806R1 is a practical fit for security guard stations, small NVR head-end closets, and AV equipment positions in commercial facilities — anywhere you need clean, surge-protected power for 6–8 mixed devices without the cost and footprint of a full UPS. The cETLus listing satisfies most AHJ requirements for listed equipment in those environments.
