Speco Technologies N128NR30TB vs Speco Technologies N128NR32TB

NVR COMPARISON

Speco Technologies N128NR30TB vs Speco Technologies N128NR32TB: Specification Comparison

Both the N128NR30TB and N128NR32TB are Speco Technologies 128-channel 4K H.265 network video recorders with integrated analytics, targeting mid-to-large IP surveillance deployments. The comparison centers on their storage capacity difference—30TB versus 32TB—along with physical form factor, mounting style, and a small set of additional specs available only for the N128NR32TB. Buyers choosing between them are effectively selecting within the same NVR platform with a 2TB storage delta and a rack versus wall mount distinction.



How much onboard storage do the N128NR30TB and N128NR32TB provide, and what does that mean for retention?

The N128NR30TB ships with 30TB of onboard storage, while the N128NR32TB ships with 32TB internal storage—a 2TB or approximately 6.7% increase. Both units record 128 IP cameras at 4K UHD resolution using H.265 HEVC compression, and both support H.264 as a secondary codec. Neither spec sheet discloses drive bay count, RAID configuration, maximum expansion capacity, or per-camera bitrate assumptions, so calculated retention days cannot be derived from the provided data alone.

The 2TB difference is meaningful at scale: at a fixed bitrate per camera, the N128NR32TB will extend retention proportionally without requiring external NAS. However, because neither datasheet specifies bandwidth throughput or recording bitrate ceilings, buyers operating near the 128-channel 4K limit should verify those figures directly with Speco before sizing for a specific retention window.


How do the N128NR30TB and N128NR32TB differ in physical form factor, mounting, and installation requirements?

The N128NR32TB is explicitly specified as a rack-mount unit with published dimensions of 15" (W) × 2.83" (H) × 13.4" (D) and a gross weight of 12 lbs. Its 2.83" height corresponds to a standard 2U rack profile. The N128NR32TB also specifies a Serial ATA interface for storage and a 12VDC, 5A power supply.

The N128NR30TB is listed with a Wall mount type in the provided spec data. No physical dimensions, weight, or power supply voltage are specified for the N128NR30TB in the provided data. The Wall mount designation for a 128-channel NVR is atypical and may reflect a data entry artifact rather than a genuine product characteristic; installers should confirm mounting options with Speco before committing to a wall-mount installation. The rack form factor of the N128NR32TB is unambiguously documented and aligns with standard data-room or IDF-closet deployments.


Are the analytics capabilities, camera compatibility, and codec support equivalent across both models?

Both recorders include an integrated video analytics engine, are ONVIF-compliant, support two-way audio, record at 4K UHD at 30fps, and use H.265/H.264 compression. Channel capacity is 128 IP cameras on both units. These core feature parity points mean neither model holds an analytics or compatibility advantage based on the published specifications.

The N128NR32TB spec additionally notes quick discovery and installation of Speco IP cameras, which may indicate a proprietary auto-discovery feature, though the N128NR30TB spec does not address this feature at all—its absence in the N128NR30TB data cannot be interpreted as absence of the feature, only as undocumented. The N128NR30TB spec includes a WDR notation and a 2.8–12 mm lens focal length reference, which appear to be PTZ camera specs mistakenly appended to the NVR product data rather than genuine NVR attributes, and should not be treated as differentiating NVR specs.


Which should you choose: the N128NR30TB or the N128NR32TB?

Our take: The N128NR32TB is the stronger choice when installation targets a standard rack environment and the additional 2TB of onboard storage is valued, while the N128NR30TB is an option when wall-mount deployment is confirmed as intentional by Speco. Concrete spec deltas: (1) storage—32TB vs. 30TB, a 2TB advantage for the N128NR32TB; (2) form factor—the N128NR32TB has documented rack-mount dimensions (15" × 2.83" × 13.4", 12 lbs., 12VDC/5A), while the N128NR30TB lacks published physical specs; (3) power supply—12VDC, 5A is confirmed only for the N128NR32TB. For enterprise or data-center deployments with standard 19" racks, the N128NR32TB's documented rack profile and slightly larger storage make it the more specifiable choice. Both units are equivalent on channel count, codec, analytics, ONVIF compliance, and frame rate.


Side-by-Side Comparison

Spec-for-spec, from manufacturer data.

SpecificationSpeco Technologies N128NR30TBSpeco Technologies N128NR32TB
Channel Capacity128 channels128 IP cameras
Recording Resolution4K UHD4K UHD
Video CodecH.265 HEVC; H.264H.265 (HEVC); H.264
Storage Capacity30TB32TB internal
Frame Rate30fps30fps
AnalyticsIntegrated video analytics engineIntegrated video analytics engine
Camera CompatibilityONVIF standard protocolONVIF-compliant IP cameras
AudioTwo-wayTwo-way
Mount TypeWallRack
Dimensions (W × H × D)15" × 2.83" × 13.4"
Weight (Gross)12 lbs.
Power Supply12VDC, 5A
Storage InterfaceSerial ATA
Warranty3-year3-year
Housing ColorWhiteWhite
Datasheet/content/product-datasheets/N128NR30TB.pdf/content/product-datasheets/N128NR32TB.pdf

Frequently Asked Questions

Which should you choose: the N128NR30TB or the N128NR32TB?

The N128NR32TB is the stronger choice when installation targets a standard rack environment and the additional 2TB of onboard storage is valued, while the N128NR30TB is an option when wall-mount deployment is confirmed as intentional by Speco. Concrete spec deltas: (1) storage—32TB vs. 30TB, a 2TB advantage for the N128NR32TB; (2) form factor—the N128NR32TB has documented rack-mount dimensions (15" × 2.83" × 13.4", 12 lbs., 12VDC/5A), while the N128NR30TB lacks published physical specs; (3) power supply—12VDC, 5A is confirmed only for the N128NR32TB. For enterprise or data-center deployments with standard 19" racks, the N128NR32TB's documented rack profile and slightly larger storage make it the more specifiable choice. Both units are equivalent on channel count, codec, analytics, ONVIF compliance, and frame rate.

Is the N128NR30TB or N128NR32TB better for larger deployments with longer retention requirements?

The N128NR32TB provides 32TB of internal storage versus 30TB on the N128NR30TB—a 2TB difference. For deployments requiring maximum onboard retention without external NAS, the N128NR32TB has a marginal advantage. Neither datasheet specifies maximum expandable storage, so buyers with high-retention needs should confirm expansion options with Speco directly.

Can I install either NVR in a standard server rack?

The N128NR32TB is documented as a rack-mount unit with dimensions of 15" (W) × 2.83" (H) × 13.4" (D), consistent with a 2U rack form factor. The N128NR30TB is listed with a Wall mount type in the available spec data, and no physical dimensions are provided. Installers planning a rack deployment should confirm the N128NR30TB's rack compatibility directly with Speco before ordering.

Do both the N128NR30TB and N128NR32TB support the same cameras and analytics features?

Yes, based on the provided specifications. Both models support 128 ONVIF-compliant IP cameras, record at 4K UHD at 30fps using H.265 and H.264 codecs, and include an integrated video analytics engine. Two-way audio is supported on both. No difference in supported camera brands, analytics rule types, or event response capabilities is documented in the available spec data.



Get a Second Opinion on Your Camera Choice

Share your site layout, coverage goals, and budget. Our team will validate the camera selection, flag anything we would change, and recommend products that match the use case.