Code Blue Z15993-01 Wall-Mount PoE Accessory

Overview

The Code Blue Z15993-01 is a brushed stainless steel wall-mount housing designed for PoE-powered security devices in installations requiring sealed environmental protection. The IP68 rating means full dust and water ingress protection — suitable for indoor corridors, sheltered outdoor walls, and any location where you need the device enclosure itself to resist moisture and contamination without relying on a separate power supply.

Power arrives via PoE (802.3af), eliminating the need for dedicated 12V runs or AC conduit work. This simplifies wall-mounted deployments where running separate power would add labor and material cost.

Compatibility

This accessory integrates with PoE-compatible surveillance and access control devices that fit within the mounting envelope and operate within the 802.3af power budget (maximum approximately 13W). Verify your specific device's power draw and physical dimensions against the mount before ordering — there is no universal wall-mount fit, and exceeding the power budget will cause the device to fail to boot or reset under thermal load.

Confirm PoE switch port availability on your network side; if your switch lacks sufficient PoE capacity, you will need a separate inline injector or dedicated PoE switch port.

Installation Notes

Wall mounting requires standard fasteners appropriate to your wall type (drywall, masonry, or steel stud). Ensure the mounting surface can support the combined weight of the housing and mounted device. The brushed stainless steel finish resists corrosion in humid or coastal environments, but avoid direct saltwater spray or high-velocity wash-down — those scenarios require additional protective measures beyond this housing.

Route PoE cable through conduit or cable raceway where exposed runs cross high-traffic areas; this protects against tripping hazards and accidental damage.

What's in the Box

• 1x Code Blue Z15993-01 brushed stainless steel wall-mount housing