Code Blue SLNF0212 PoE Network Cable Assembly
Overview
The Code Blue SLNF0212 is a PoE-capable network cable assembly rated IP67, designed to connect powered security cameras and network devices in wet and dusty environments without signal or power loss. The assembly delivers both ethernet and power over a single run, eliminating the need for separate power conduit — a real cost and installation-time saving on outdoor or damp-environment jobs. The stainless-steel construction resists corrosion from salt spray, moisture, and UV exposure, making it suitable for coastal installations, parking structures, and unshielded outdoor camera mounts where standard PVC-jacketed cables fail within months.
Compatibility
The SLNF0212 integrates with PoE-enabled IP cameras, network switches, and security devices supporting 802.3af or higher power delivery. Verify your endpoint (camera, NVR, or edge device) lists 802.3af minimum in its power spec before ordering. Compatible with both PoE injectors and native PoE switch ports. Suitable for fixed surveillance camera installations, alarm system wiring, and environmental monitoring deployments requiring sealed connectors in outdoor or high-moisture areas.
Installation Notes
IP67 rating means the assembly tolerates direct spray and temporary submersion (splash zones, outdoor camera bases, cable runs through standing water). Do not exceed 60°C ambient temperature during operation; if your installation site sees hotter peaks, allow for thermal margin in cable runs or request a temperature-rated variant. Connector strain relief is critical — use cable ties or clips at intervals to prevent flexing at the termination point, which is the primary failure mode in high-vibration or windy outdoor settings. Test continuity and voltage drop across the run before live deployment to confirm no installation damage occurred.
