Code Blue SLNF0129 IP68 Outdoor PoE Connector

Overview

The SLNF0129 is a Code Blue PoE inline connector rated IP68, built to join or extend PoE cable runs on outdoor emergency phone and call station installs without opening a splice point to moisture or dust intrusion. It carries data and power together over a single sealed joint, which matters on pole-mounted and area-of-rescue stations where the cable run terminates outdoors and a standard RJ-45 coupler would become a corrosion point within a season. White housing matches Code Blue's typical outdoor tower and pedestal color scheme so the connector doesn't stand out as an obvious tamper or splice target.

Compatibility

SLNF0129 is a Code Blue accessory part, intended for use with Code Blue PoE-powered emergency phone and blue light tower systems where the run between the PoE switch or injector and the station needs a weatherproof inline joint. Confirm cable gauge and connector gender against your specific Code Blue station model before ordering, since Code Blue's tower and wall-mount lines use station-specific cable drops. If you're speccing a new install rather than repairing an existing one, cross-check this against the Code Blue product line and the connector requirements listed for your chosen tower or intercom model.

Installation Notes

Because this connector is IP68-rated, it's built for direct burial-adjacent and fully exposed outdoor runs, not just splash zones — the tradeoff is that field termination should follow Code Blue's sealing procedure exactly, since a loose gland is the usual failure point on IP68 hardware. Route the joint above grade where possible and support the cable so the connector body isn't carrying tension load. Pair the run with a compliant PoE switch sized to the station's power draw, and consult a PoE planning guide if you're budgeting power and cable distance across multiple towers on one switch.