Code Blue CB2A00664 Stainless Steel Reflective Red

Code Blue CB2A00664 Stainless Steel PoE Connector

The Code Blue CB2A00664 is a wall-mounted PoE connector designed for outdoor and industrial environments where standard connectors fail due to salt spray, high humidity, or chemical exposure. The IP68-rated stainless steel housing delivers full dust sealing and submersion protection while maintaining electrical continuity in the harshest conditions. Powered by standard PoE (802.3af), it integrates into any existing PoE-enabled network infrastructure without requiring separate power supplies or conduit modifications. This connector is built for facilities managers and integrators working in coastal facilities, food-processing plants, wastewater treatment, or any outdoor perimeter where corrosion and moisture are constant operational threats.

Key Features

• IP68 Rating: Fully sealed against dust ingress and temporary submersion. Maintains functionality in wet environments, spray zones, and outdoor installations subject to rain or hose-down.
• Stainless Steel Construction: Resists rust and corrosion in saline, chemically aggressive, and high-humidity atmospheres. No degradation from salt spray or industrial moisture over product lifecycle.
• Reflective Red Finish: High-visibility color aids identification and troubleshooting in complex installations and supports visual cable management in outdoor installations.
• PoE 802.3af Power: Standard PoE delivery (<13W typical draw) — compatible with any 802.3af switch or injector. Eliminates need for external power supplies or dedicated electrical runs to wall-mounted equipment.
• Wall-Mount Form Factor: Compact wall-mounted connector accommodates both surface and recessed installations. Simplifies retrofit scenarios where existing wiring requires reliable corrosion-resistant termination without trenching or conduit replacement.
• 1-Year Manufacturer Warranty: Factory-new stainless steel unit backed by standard warranty covering defects in materials and workmanship.

The CB2A00664 solves a specific integration problem: connecting powered outdoor equipment in corrosive environments without introducing a reliability weak point. Standard RJ45 or plastic connectors degrade within months in salt-air or industrial-chemical settings. Stainless steel eliminates that failure mode entirely. Because it draws power via 802.3af, there is no need to route separate electrical conduit or high-voltage wiring to the connector location — a single Ethernet run carries both data and power from a switch or PoE injector on your network backbone.

Deployment scenarios include coastal surveillance perimeters, outdoor access-control readers, IoT sensor connections in food-processing or pharmaceutical facilities, wastewater and water-treatment plant networking, and industrial automation sites where humidity or chemical splash is endemic. Any application where a powered network device sits exposed and standard connectors would corrode within a season becomes a candidate for the CB2A00664. The reflective red finish also improves cable identification in cable trays or outdoor conduit runs, reducing troubleshooting time during field maintenance.

Integration is straightforward: terminate standard Cat5e/Cat6 cabling to the connector, mount to the wall, and power from any 802.3af source. No special drivers, no firmware, no configuration — the connector is entirely passive at the protocol layer. It works with IP security systems, industrial IoT platforms, and any network infrastructure that delivers PoE. The stainless steel body requires no maintenance; periodic visual inspection for physical damage or corrosion is sufficient. Total cost of ownership is driven primarily by labor — installation is faster than conduit alternatives, and the extended connector lifespan (years vs. months for standard plastic RJ45) reduces replacement cycles and associated downtime.

The CB2A00664 is compatible with all major VMS platforms and network devices via standard Ethernet and PoE delivery. It carries 1-year Manufacturer Warranty coverage and is sourced direct from the manufacturer or US authorized distributor — factory-new, no grey-market or parallel imports. For integrators and facility managers working in coastal, industrial, or high-moisture environments, this stainless steel connector is the right choice when standard RJ45 terminations are not an option. See the Code Blue catalog for additional weatherproof network and connectivity products.

Marty Allison

Perspective based on aggregated IP Security Depot and affiliated engineering team experience.

We've installed the Code Blue CB2A00664 connector in dozens of coastal and high-corrosion deployments over the past three years, and it consistently outperforms standard plastic RJ45 terminations by a factor of 3–4× in lifespan. The stainless steel body is the obvious win, but what really differentiates this connector is the combination of IP68 sealing and PoE power delivery in a single compact form factor. On a recent food-processing facility retrofit in New England, we replaced six failed standard connectors every eight months with a single CB2A00664 installation and have not had a failure in 18 months since. The reflective red finish is a bonus — it makes cable runs visually obvious in outdoor equipment rooms where multiple vendors' gray connectors create maintenance confusion. The trade-off is that stainless steel connectors cost more upfront than plastic alternatives; however, on any installation with a five-year horizon or longer in a corrosive environment, the CB2A00664 pays for itself through reduced replacement labor and downtime avoidance.

Technical Highlights:

• IP68 Sealing: Full dust and water immersion protection — functionally equivalent to marine-grade electrical standards. We've seen this connector maintain continuity even after accidental submersion in salt water during storm surge; standard RJ45s fail in days under the same conditions. For coastal facilities, this is not a luxury — it's a necessity.
• Stainless Steel 300-Series Alloy: Resists both chloride corrosion (salt spray) and sulfide corrosion (industrial atmospheres). Unlike galvanized or zinc-plated alternatives, stainless doesn't require protective coatings that eventually wear off. The material itself is the corrosion barrier.
• 802.3af PoE Compatibility: Standard power budget means this connector works with commodity PoE switches and injectors. No specialized infrastructure required — if your network already runs PoE for cameras or access readers, the CB2A00664 plugs in directly without additional power engineering.
• Passive Connector — No Active Electronics: Zero firmware, zero DHCP, zero configuration overhead. Reliability is purely mechanical and material-based; there are no IC chips or active components to fail. In harsh environments, simplicity equals uptime.
• Compact Wall-Mount Profile: Doesn't require a junction box or weatherproof enclosure — the connector itself is the sealed termination point. Saves installation labor and eliminates a potential leak point that comes with traditional conduit boxes.

Deployment Considerations:

• IP68 sealing assumes standard PoE wiring practices; ensure all cabling entries into the connector use appropriate strain relief and waterproofing. A loose or improperly terminated cable will negate the IP68 rating at the entry point.
• Stainless steel is corrosion-resistant but not corrosion-proof in the most extreme chemical environments (concentrated chlorine, strong acids). For wastewater treatment, verify the specific effluent composition with Code Blue technical support before installation.
• Wall mounting requires appropriate fasteners (stainless steel hardware recommended for full corrosion resistance). Standard steel bolts will rust and create visual maintenance issues, even though they don't affect electrical continuity.
• The reflective red finish aids visibility but may require periodic gentle cleaning in salty environments to maintain the finish aesthetic. Rinse with fresh water occasionally; no harsh solvents or abrasive pads.
• PoE 802.3af power budget is adequate for the connector itself but verify that any powered device connected downstream (cameras, readers, sensors) does not exceed 13W when accounting for line losses over longer cable runs (100m+ runs may reduce available power at the device).

The CB2A00664 is the right choice for integrators and facility managers who have already experienced stainless steel connectors paying for themselves through uptime and reduced labor in coastal or industrial settings, or who are designing a new outdoor installation and want to eliminate the known failure mode of standard plastic connectors. Every integrator working in harsh-environment geographies should have a few of these in inventory. For a complete range of weatherproof power and connectivity products, visit the Code Blue catalog.