Code Blue 40344 Anchor Bolt Epoxy Workaround Kit

Overview

The Code Blue 40344 is an anchor bolt epoxy workaround kit engineered for installations where traditional mechanical fastening falls short due to substrate limitations or environmental constraints. IP68-rated sealing protects the mounting assembly against standing water, salt spray, and dust ingress — critical for coastal, humid, or corrosive industrial settings. The kit receives power via PoE (802.3af), eliminating the need for separate power infrastructure runs to the mounting point. This approach reduces installation complexity and cost in retrofit scenarios where cable routing to wall-mounted or embedded security equipment would otherwise require conduit runs or surface-mount labor.

Compatibility

The 40344 kit is designed to support secure mounting configurations where PoE-powered devices require epoxy-anchored fastening. Confirm your specific device and wall substrate (concrete, masonry, metal stud framing, or composite materials) against the kit's epoxy specifications before ordering. Integrators should verify that their target installation surface permits epoxy curing times (typically 24 hours for full strength) and ambient temperature ranges during the cure window. The kit integrates into standard PoE infrastructure without requiring protocol changes or additional management overhead.

Installation Notes

Epoxy-based anchor bolts require surface preparation — clean the mounting surface of loose paint, dust, and oils before application. Allow full curing time per the kit's instructions before loading the device. Verify that your PoE switch or injector can sustain 802.3af power delivery to the mounted equipment plus any in-line cable losses over the run. In outdoor or high-vibration environments, inspect the epoxy bond periodically to confirm no movement or micro-fracturing has occurred.

What's in the Box

Package contents not specified in available evidence. Verify SKU documentation or contact the manufacturer for itemized contents.