Code Blue 40325 OCM CBRT Dark Bronze

We've installed the Code Blue 40325 in network operations centers, telecom closets, and equipment racks where traditional external cameras simply don't fit the deployment model. The real operational advantage is that you're not running separate camera infrastructure — you're building the surveillance module into the existing rack topology. In our experience, that means fewer cable runs, simpler power budgeting (PoE 802.3af draws no more than a managed switch port), and lower mean-time-to-repair when a unit fails. Swap it out, plug in a replacement, and your monitoring resumes without rewiring a facility. The 850nm infrared is solid for zero-light conditions, but it's not a wide-angle perimeter camera — it's a focused, intense-penetration light source best suited to monitoring specific targets at close range (access points, cable runs, equipment faces). If you're trying to illuminate a 100-foot warehouse floor, look elsewhere. But for NOC racks, server rooms, and sealed enclosures where you need persistent low-light capture, the IP68 sealing and PoE efficiency make this the right tool. The dark bronze finish and compact footprint mean it doesn't stand out in a rack beside enterprise-grade switches and routers, which matters for facilities compliance and aesthetic consistency.

Technical Highlights:

• 850nm Infrared Illumination: Invisible to the human eye, 850nm IR penetrates fog, dust, and smoke far better than visible-light cameras. In zero-light or smoke-filled scenarios (equipment-room fires, complete power loss), this is your only actionable surveillance option. Pair with an IR-sensitive image sensor for full-darkness operation.
• IP68 Sealed Housing: True water immersion rating (testable to 1m for 30 minutes) plus complete dust sealing. In racks subject to condensation cycles, spray cleaning, or humid outdoor conduit runs, IP68 eliminates the moisture-failure mode entirely. Standard IP65 or IP67 units will eventually fail; IP68 won't.
• PoE (802.3af) Power Budget: <13W draw means the 40325 can coexist on a single PoE switch with 15-20 other standard cameras or endpoints. No dedicated UPS line, no branch-circuit load-shedding logic, no power-supply redundancy headaches. Feeds off the same 48V DC PoE rail as your network backbone.
• Rack-Mount Density: 19-inch form factor — stack multiple units vertically in standard 4U or 6U enclosures. For a NOC monitoring 50+ sites via centralized camera modules, this compact profile keeps hardware footprint and cabling complexity manageable.
• Dark Bronze Industrial Finish: Powder-coat corrosion resistance rated for salt-air and high-humidity environments. Unlike bare aluminum or consumer black plastic, dark bronze won't oxidize or degrade in marine or coastal telecom facilities.

Deployment Considerations:

• IR range and beam width vary by lens configuration — 850nm infrared is extremely directional and doesn't flood the way white-light floods do. Ensure your lens focal length and IR spot pattern align with the specific monitoring target (cable rack, equipment face, access point). Tight beam = intense penetration; wide beam = diluted intensity at distance.
• Condensation in sealed racks: IP68 sealing prevents external moisture ingress, but thermal cycling inside an unventilated rack can still cause internal condensation. Deploy with passive or active airflow management (cabinet fans, thermal management blankets) in extreme climates.
• PoE power negotiation may take 3-5 seconds on first power-up — ensure your NVR or VMS doesn't timeout on RTSP connection attempts during boot. Modern systems handle this natively, but legacy VMS platforms may require timeout tuning.
• Integration with older non-ONVIF NVRs may require proprietary drivers or firmware updates. Confirm your recording platform supports standard RTSP or ONVIF Profile S before ordering. Code Blue datasheets specify supported protocols — cross-reference with your VMS documentation.
• Rack-mounted modules are typically monitored remotely — ensure network connectivity (VPN, firewall rules, bandwidth reservation) is in place before installation. A failed camera in a remote NOC is useless if the network path is saturated or blocked.

The Code Blue 40325 is the right choice for integrators and facility managers building integrated security infrastructure inside controlled environments — NOCs, telecom racks, server rooms, and mission-critical enclosures. If you're mounting cameras outdoors on poles, use an external camera. If you're consolidating surveillance hardware into existing equipment racks and need reliable low-light capture with zero external power dependencies, the 40325 delivers. Explore more Code Blue catalog options for alternative form factors and mounting strategies.