Panduit PLT4S-C10 Premium Pan-Ty Cable Tie, 14.5 In., Nylon 6.6, White, 100-Pack

Overview

The Panduit PLT4S-C10 is a 14.5-inch (368mm) standard cross-section Pan-Ty® cable tie made from Nylon 6.6, designed for general-purpose wire bundling, routing, and management applications where consistent locking performance and long-term reliability matter. If you're wiring security head-end enclosures, pulling cable bundles through conduit drops, or dressing rack cable management in a commercial installation, this is the workhorse tie that shows up on nearly every job. Each package contains 100 ties — enough to close out a typical panel rough-in or dress a full rack run without reaching for another bag.

The PLT4S-C10 (often searched as PLT4S C10) meets UL Recognition (File #E56854), CSA Certification, UL 62275 Type 2S and 21S compliance, and RoHS requirements — so it clears procurement hurdles on commercial and institutional jobs without additional documentation requests.

Key Features

• One-Piece Locking Wedge: The wedge design engages the strap teeth along the full contact surface, not just a single bite point. In practice, this means the tie holds its rated loop tensile strength consistently from the first installation to the last tie in the bag — you're not fighting variance between pulls.
• Low Thread Force: Feeding the tail through the head on a thick bundle or in a tight enclosure takes noticeably less effort than standard-geometry ties. On large cable management runs where you're installing dozens of ties in sequence, this reduces hand fatigue — practical on data center cabling and panel dressing shifts.
• High Loop Tensile Strength: The Nylon 6.6 construction and locking wedge geometry combine to maintain bundle integrity under the thermal cycling and mechanical vibration common in equipment rooms and outdoor junction boxes. Bundles stay tight; ties don't back off over time.
• Nylon 6.6 Material: Nylon 6.6 offers better heat resistance and stiffness compared to commodity Nylon 6, making the PLT4S-C10 appropriate for environments with elevated ambient temperatures — near rack power strips, inside enclosures with active equipment, or in unconditioned telecom rooms.
• 14.5-Inch Length: At 368mm, this tie handles medium-to-large bundle diameters — suitable for grouping multi-conductor control wire, Cat6 trunk bundles, or power feeder sub-groups without needing to size up to a longer tie just to close the head.
• UL Recognized + CSA Certified: UL File #E56854 and CSA Certification mean these ties satisfy the component-level compliance requirements inspectors and AHJs look for on commercial electrical and low-voltage installations. Specifying PLT4S-C10 on a submittal package closes the tie spec cleanly.
• UL 62275 Type 2S / 21S Compliant: This standard governs cable management performance for fixed installations. Type 2S and 21S classifications cover tensile strength and flammability — relevant when you're dressing wire in plenum or rated enclosure environments where the tie spec can come under scrutiny.
• RoHS Compliant: Meets the EU Restriction of Hazardous Substances directive, which satisfies material compliance requirements on government, healthcare, and export-bound projects that require RoHS documentation in the bill of materials.
• White Color: White is the standard neutral choice for labeled bundles, clean-room aesthetics, and applications where visual inspection of the bundle is important. If color-coded bundling is required by your cable management standard, Panduit offers the same Pan-Ty platform in multiple colors.
• 100-Piece Package / 1,000-Piece Carton: The standard package of 100 ties keeps stock manageable for smaller jobs or van stock, while carton quantity of 1,000 supports procurement for larger projects or stocking a shop without over-ordering on a per-job basis.

Integration & Compatibility

The PLT4S-C10 is designed for use with Panduit's cable tie installation tools including the GTS-E, GS2B-E, GTH-E, GS4H-E, PTS, and PTH tensioning and cut-off guns. Using a calibrated installation tool — rather than manual pull-and-snip — delivers consistent cinch tension and a flush cut on the tail, which matters on high-density cable management where protruding tails cause snag points and look unprofessional on client walkthroughs. If you're running a field crew through a large installation, tool-applied ties also improve installation speed and reduce variance between technicians.

The competitor cross-reference for this product is T50L10C2, making it a direct drop-in when substituting into specifications written around that part number.

What's in the Box

• 100x Panduit PLT4S-C10 Pan-Ty Premium Cable Ties (14.5 in., Nylon 6.6, White)

Frequently Asked Questions

Q: What bundle diameter can the PLT4S-C10 accommodate?

A: At 14.5 inches (368mm) overall length, the PLT4S-C10 handles medium-to-large bundle diameters. Exact max bundle diameter depends on the bundle geometry, but the 14.5-inch strap length is well-suited for grouping multi-conductor wire harnesses, Cat6 trunk groups, and similar commercial cabling bundles.

Q: Is the PLT4S-C10 RoHS compliant?

A: Yes. The PLT4S-C10 meets RoHS (Restriction of Hazardous Substances) compliance requirements, which satisfies material documentation requirements on government, healthcare, and export-oriented projects.

Q: What certifications does the PLT4S-C10 carry?

A: The PLT4S-C10 is UL Recognized (File #E56854), CSA Certified, UL 62275 Compliant (Type 2S and 21S), and RoHS Compliant. These cover the component-level compliance requirements most commonly required on commercial low-voltage and electrical installations.

Q: Which Panduit installation tools are compatible with the PLT4S-C10?

A: The PLT4S-C10 is designed for use with the following Panduit installation tools: GTS-E, GS2B-E, GTH-E, GS4H-E, PTS, and PTH tensioning and cut-off guns.

Q: What is the cross-reference or equivalent part number for the PLT4S-C10?

A: The listed competitor cross-reference for the PLT4S-C10 is T50L10C2. It is a direct substitute when working from a specification written around that part number.

Q: How many ties come in a package and how are they sold in bulk?

A: The standard package contains 100 ties (the PLT4S-C10 unit of sale). The full carton quantity is 1,000 ties for larger project procurement.

Karl Wilson

The PLT4S-C10 is what I reach for when the job calls for a cable tie that won't be a variable — the one-piece locking wedge design is the reason. On installs where I'm dressing 40 or 50 bundles in a single head-end room, I need every tie to close with the same tension and hold it. The wedge geometry on this tie does that; it's not splitting teeth or ratcheting inconsistently depending on how fast you pull the tail.

Technical Highlights:

• Nylon 6.6 Construction: Stiffer and more heat-tolerant than Nylon 6 — relevant inside enclosures running active PoE switches or UPS units where ambient temps regularly exceed comfortable room temperature. The material holds its rated tensile strength without becoming brittle or stress-creeping over time.
• UL 62275 Type 2S/21S + UL Recognition File #E56854: These aren't cosmetic certifications. Type 2S and 21S govern tensile performance and flammability in fixed installations — if your AHJ pulls the job documents or a fire marshal inspects, the PLT4S-C10 spec closes cleanly without a variance request.
• 14.5-Inch / 368mm Length: Long enough to close around a meaningful multi-conductor bundle or a grouped Cat6 run without doubling up ties, but not so long that you're wasting strap on small bundles. It's the right size for the 80% case on commercial security and network cabling installations.

Deployment Considerations:

• If you're installing high volumes, pair the PLT4S-C10 with a compatible Panduit tensioning gun (GTS-E, GS4H-E, or similar from the verified tool list). Tool-applied tension removes the per-technician variance you get with hand-pulled ties — especially important on dense cable tray runs where you want uniform bundle compression and flush tail cuts.
• White Nylon 6.6 has a practical UV limitation — for exposed outdoor bundling or exterior conduit work in direct sunlight, consider a UV-stabilized black variant. The PLT4S-C10 is rated for general use, not prolonged UV exposure.

For commercial security integrators dressing head-end equipment rooms, running cable management in IDF closets, or bundling low-voltage wire in access control panels, the PLT4S-C10 covers the standard 14.5-inch use case with the compliance paperwork already handled. It's the right tie to spec when you need UL and CSA documentation in the submittal package without sourcing a specialty product.